HyperGear Wave Haririk gabeko Bluetooth Bozgorailu Eramangarriaren 14704 Erabiltzailearen Eskuliburua

Sarrera

The HyperGear Wave Portable Wireless Bluetooth Speaker (Model 14704) is designed to deliver high-definition stereo sound in various environments. Its IPX4 waterproof rating makes it suitable for use near water, while the built-in microphone allows for hands-free calls. This manual provides essential information for the proper setup, operation, and maintenance of your speaker.

Image: HyperGear Wave speaker, showcasing its waterproof design with water splashes.

Paketearen edukia

Egiaztatu elementu guztiak paketean daudela:

• HyperGear Wave Speaker
• 3.5mm Stereo Auxiliary Cable
• Mikro USB kargatzeko kablea
• Erabiltzailearen eskuliburua (dokumentu hau)

Image: The HyperGear Wave speaker alongside its included 3.5mm auxiliary cable and Micro USB charging cable.

Konfigurazioa

1. Bozgorailua kargatzea

Before initial use, fully charge the speaker. Connect the Micro USB Charging Cable to the speaker's charging port and the other end to a USB power source (e.g., wall adapter, computer USB port). The charging indicator light will illuminate during charging and turn off or change color when fully charged.

2. Piztu/Itzaltzea

Press and hold the Power button (usually marked with a power icon) for approximately 3 seconds to turn the speaker on or off. A sound prompt or LED indicator will confirm the status change.

Funtzionamendu-argibideak

1. Bluetooth parekatzea

1. Ziurtatu bozgorailua piztuta dagoela eta Bluetooth gaitutako gailutik 10 metrora (33 oin) dagoela.
2. The speaker will automatically enter pairing mode, indicated by a flashing LED light (refer to your speaker's specific LED behavior).
3. On your device, navigate to the Bluetooth settings and search for available devices.
4. Select "HyperGear Wave" (or similar name) from the list.
5. Behin parekatuta, bozgorailuak baieztapen-soinu bat igortzen du eta LED argia finko piztuta egongo da.

Bozgorailuak automatikoki saiatuko da azken parekatutako gailura berriro konektatzen pizten denean.

Image: The HyperGear Wave speaker positioned on sand, demonstrating its wireless capability for outdoor use.

2. Oinarrizko Kontrolak

• Erreproduzitu/Pausatu: Sakatu Erreproduzitu/Pausatu botoia behin.
• Bolumena igo: Sakatu '+' botoia.
• Bolumena jaitsi: Sakatu '-' botoia.
• Hurrengo ibilbidea: Sakatu eta eutsi '+' botoiari.
• Aurreko pista: Sakatu eta eutsi '-' botoiari.
• Deia erantzun/amaitu: Sakatu Erreproduzitu/Pausatu botoia behin sarrerako dei batean zehar.
• Deia baztertu: Sakatu eta eutsi Erreproduzitu/Pausatu botoia sarrerako dei batean.

3. Audio Input Modes

The HyperGear Wave speaker supports multiple audio input options:

• Bluetooth modua: Haririk gabeko konexio lehenetsia.
• Auxiliary (AUX) Mode: Connect an audio device using the included 3.5mm Stereo Auxiliary Cable. The speaker will automatically switch to AUX mode when the cable is inserted.
• Mikro SD txartelaren modua: Insert a Micro SD card (not included) with audio files into the designated slot. The speaker will automatically detect and play music from the card.

Irudia: Gertutik view of the speaker highlighting its compatibility with Bluetooth, Auxiliary input, and Micro SD cards.

Mantentzea

• Garbiketa: Erabili biguna, damp cloth to clean the speaker's exterior. Avoid harsh chemicals or abrasive cleaners.
• Uraren esposizioa: While IPX4 waterproof, avoid submerging the speaker. Ensure all port covers are securely closed before exposure to water.
• Biltegiratzea: Gorde bozgorailua leku fresko eta lehor batean, tenperatura altuetatik eta eguzki-argitik babestuta.
• Bateria zaintzea: Bateriaren iraupena luzatzeko, saihestu bozgorailua maiz erabat deskargatzea. Kargatu aldizka, denbora luzez erabiltzen ez baduzu ere.

Image: The HyperGear Wave speaker attached to a kayak, illustrating its suitability for splash-prone environments.

Arazoak konpontzea

• Speaker will not turn on: Ziurtatu bateria kargatuta dagoela. Konektatu kargatzeko kablea eta saiatu berriro.
• Ezin da Bluetooth gailuarekin parekatu:
  • Ziurtatu bozgorailua parekatze moduan dagoela (LED keinukaria).
  • Ziurtatu Bluetootha gaituta dagoela zure gailuan.
  • Hurbildu bozgorailua gailura (33 metro baino gutxiagora).
  • Itzali eta piztu bozgorailua eta gailuaren Bluetooth-a.
  • Forget the speaker from your device's Bluetooth list and attempt to re-pair.
• Soinurik ez edo bolumen baxua:
  • Doitu bolumena bozgorailuaren eta konektatutako gailuan.
  • Ensure the speaker is properly paired or the AUX cable/Micro SD card is correctly inserted.
  • Egiaztatu audio-iturria erreproduzitzen ari den.
• Soinu kalitate eskasa:
  • Hurbildu bozgorailua zure Bluetooth gailura interferentziak saihesteko.
  • Ziurtatu bozgorailuen eta gailuaren artean oztoporik ez dagoela.
  • If using AUX, check the cable for damage and ensure it's fully inserted.

Zehaztapenak

Bermea eta Laguntza

Bermearen informazioa

This HyperGear product comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included in your product packaging or visit the official HyperGear webgunea.

Bezeroarentzako Arreta

If you encounter any issues or have questions not covered in this manual, please contact HyperGear customer support. Contact information can typically be found on the product packaging or the official HyperGear webgunea: www.hypergear.com.