KING KB ECO2S Garage Heater 15000W/240V Instruction Manual

1. Sarrera

The KING KB ECO2S Garage Heater is designed to provide efficient and controlled heating for garages and similar large spaces. This unit features an integrated ECO2S electronic thermostat with remote control, offering energy-efficient 2-stage heating and an Eco mode that automatically adjusts wattage. It also includes fan-only and timer modes, along with an auto-memory feature to retain settings after power interruptions. Constructed with spiral steel elements and a high CFM fan, it ensures even air distribution and prolonged heater life. A universal wall/ceiling bracket is included for flexible installation.

Irudia: Aurrealdea view of the KING KB ECO2S Garage Heater, highlighting the control panel and heating elements.

2. Segurtasun informazio garrantzitsua

OHARRA: Irakurri argibide guztiak berogailu hau instalatu edo erabili aurretik. Argibide hauek jarraitzen ez badira, deskarga elektrikoak, sua, kalte materialak edo lesio pertsonalak gerta daitezke.

• Always disconnect power before servicing or cleaning the heater.
• Berogailu hau erabiltzen denean bero dago. Erredurak saihesteko, ez utzi azala biluziak gainazal beroak ukitzen.
• Berogailuaren aurrealdetik 3 oin (0.9 m) gutxienez eduki erregaiak, hala nola altzariak, burkoak, oheak, paperak, arropa eta gortinak, eta urrundu alboetatik eta atzetik.
• Ez erabili kanpoan.
• Berogailu hau ez dago bainugeletan, garbitegietan eta antzeko barruko lekuetan erabiltzeko.
• Ez jarri kablea alfonbra azpian. Ez estali kablea alfonbra, lasterkari edo antzeko estalkiekin. Jarri kablea trafiko-eremutik urrun eta estropezu egingo ez den tokitik.
• Konektatu beti berogailuak zuzenean hormako entxufe/hargune batean. Inoiz ez erabili luzapen-kablearekin edo lekuz alda daitekeen korrontearekin (hartunea/elektro-multzoa).
• This heater is for 240V applications only. Ensure proper wiring and circuit breaker capacity.
• Instalazioa elektrizista kualifikatu batek egin behar du, tokiko eta estatuko arau elektriko guztien arabera.

3. Paketearen edukia

The KING KB ECO2S Garage Heater package includes the following items:

• KING KB ECO2S Garaje Berogailu Unitatea
• Horma/sabairako muntaketa-euskarri unibertsala
• Eskuko urrutiko agintea
• Urrutiko Agintearen Hormako Euskarria
• Installation Hardware (lag bolts, nuts, etc.)
• Heavy-duty pigtail (for electrical connection)

Image: KING KB ECO2S Garage Heater shown with its included mounting bracket and remote control.

4. Konfigurazioa eta instalazioa

4.1 Berogailua muntatzea

The universal bracket allows for wall or ceiling mounting. Ensure the mounting surface can support the heater's weight (approximately 48 pounds) and is structurally sound. Use the provided lag bolts to secure the bracket to framing members.

• Attach the bracket to the heater using the large knobs on the sides.
• Adjust the heater's angle using the smaller knobs on the bracket. The heater can be tilted to four different positions to direct heat as needed.

Image: Diagram illustrating recommended garage coverage based on heater wattage. The 15000W model heats up to 1,500 sq ft.

4.2 Konexio elektrikoa

WARNING: Electrical installation must be performed by a licensed electrician in accordance with all local and national electrical codes.

• Ensure power is disconnected at the circuit breaker before beginning any wiring.
• Remove the access panel on the heater by loosening the Phillips screw.
• Remove the knockout on the side of the heater where the wiring will enter.
• Install the provided grommet with integral strain relief into the knockout hole.
• Connect the heavy-duty pigtail wires to the terminal block inside the heater:
  • Black wire to L1 lug.
  • Red wire to L2 lug.
  • Green wire to the grounding screw.
• Ensure all wires are securely tightened and that no insulation is under the terminals.
• Tighten the strain relief nut to secure the pigtail and prevent damage to the wiring.
• Close the access panel and secure it with the Phillips screw.
• This 15000W, 240V unit requires a minimum of 8 AWG copper wire and a 40 Amp etengailua.

Irudia: Atzealdea view of the heater with the wiring access panel open, showing the terminal block for electrical connections.

4.3 Termostatoaren ezarpena

On the back of the heater, there is a toggle switch to select between the built-in thermostat and an external thermostat.

• Set the switch to "I" for the built-in thermostat (recommended for most users).
• Set the switch to "II" if you are using an external thermostat wired by an electrician.
• Incorrect setting of this switch will prevent normal operation.

4.4 Installation Video Reference

The following video demonstrates the wiring and mounting process for a similar garage heater. While the model shown is 6000W, the general installation principles apply to the KING KB ECO2S heater.

5. Funtzionamendu-argibideak

The heater features an intuitive control panel and a remote control for convenient operation.

5.1 Kontrol-panela

Upon plugging in the unit, it will beep, indicating power and correct voltage. The control panel features a digital display and several buttons:

• Pizteko botoia: Unitatea ON / OFF itzaltzen du.
• Modu botoia: Cycles through different heating modes:
  • Baxua: Operates at a lower wattage.
  • Modu ekologikoa: Automatically uses the lowest wattage needed to heat the room, optimizing energy efficiency.
  • Fan soilik: Airea berotu gabe zirkulatzen du.
  • Altua: Operates at maximum wattage for rapid heating.
• Gora / Behera botoiak: Egokitu nahi duzun tenperatura-ezarpena.
• Tenporizadorearen botoia: Sets a timer for the heater to run for a predetermined length of time, after which it will automatically shut off.

Irudia: Aurrealdea view of the heater, showing the adjustable louvers for directing airflow.

5.2 Urruneko kontrola

The compact remote control provides full functionality from a distance, allowing you to adjust settings without directly accessing the unit.

• Pizteko botoia: Unitatea ON / OFF itzaltzen du.
• Modu botoia: Cycles through heating modes (Low, Eco, Fan Only, High).
• Tenperatura igo/jaitsi: Nahi den tenperatura doitzen du.
• Tenporizadorearen botoia: Funtzionamendu-tenporizadorea ezartzen du.

The remote control is a convenient feature, especially when the heater is mounted high or in a hard-to-reach location.

6. Mantentzea

WARNING: Always disconnect power at the main service panel before attempting any maintenance or cleaning.

• Garbiketa: Berogailuaren kanpoaldea aldian-aldian garbitu zapi leun eta lehor batekin.amp oihal. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
• Hautsa kentzea: Use a vacuum cleaner with a brush attachment to remove dust from the grilles and heating elements. Ensure the heater is completely cool before cleaning.
• Ikuskapena: Regularly inspect the power cord and plug for any signs of damage. If damaged, do not use the heater and contact a qualified electrician for repair.
• Lubrifikazioa: The unit features a permanently lubricated motor and does not require additional lubrication.

7. Arazoak

8. Zehaztapenak

9. Bermea eta Laguntza

Bermeari buruzko informazioa lortzeko, kontsultatu zure produktuarekin batera datorren dokumentazioa edo bisitatu KING ofiziala. website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact KING customer service.

Kontaktu informazioa normalean fabrikatzailearen webgunean aurki daiteke. webgunean edo produktuaren ontzian.