Datalogic Gryphon GM4500 Wireless Barcode Scanner Kit

Sarrera

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Datalogic Gryphon GM4500 Wireless Barcode Scanner Kit. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

Paketearen edukia

Egiaztatu elementu guztiak zure paketean daudela:

• Datalogic Gryphon GM4500 Wireless Barcode Scanner (GM4500-BK-433K1)
• Wireless Charging Base (WLC4090-BK-433)
• USB Cable (90A052258)
• Litio-ioizko bateria (aurrez instalatuta edo bereizita)

Produktua amaituview

The Datalogic Gryphon GM4500 is a high-performance wireless barcode scanner designed for various applications. Below is an illustration of the scanner's main components.

Image: Datalogic Gryphon GM4500 Wireless Barcode Scanner. This image shows the black handheld scanner with its scan window emitting light, and a blue trigger button on the handle. The base of the handle features a wireless charging indicator.

Funtsezko osagaiak:

• Eskaneatu leihoa: Area where barcodes are read.
• Aktibatzeko botoia: Eskaneatze-izpia aktibatzen du.
• Adierazle argiak: Provide feedback on status (e.g., battery, scan success).
• Wireless Charging Contacts: Located at the base of the scanner for charging with the WLC4090-BK-433 base.
• Haririk gabeko kargatzeko oinarria: Connects to the host system via USB and charges the scanner.

Konfigurazioa

1. Eskanerra kargatu:
   • Connect the USB cable to the Wireless Charging Base (WLC4090-BK-433) and then to a powered USB port on your computer or a USB power adapter.
   • Place the Gryphon GM4500 scanner onto the charging base. Ensure the charging contacts align.
   • Eskanerraren adierazle-argiak kargatze-egoera erakutsiko du. Lehenengo erabilera baino lehen, utzi denbora nahikoa karga osoa egiteko.
2. Connect the Base to Host System:

   The charging base also acts as the communication interface. Once connected via USB, your operating system should automatically detect and install the necessary drivers. If not, refer to Datalogic's official webgidarien deskargarako gunea.

3. Pairing the Scanner with the Base:

   The scanner and base are typically pre-paired. If pairing is lost or you are setting up a new scanner/base combination:

   • Ensure the base is powered and connected to the host system.
   • Refer to the Datalogic Gryphon GM4500 Quick Reference Guide (usually included or available online) for specific pairing barcode sequences. Scan the designated pairing barcode with the scanner.
   • A successful pairing will be indicated by an audible beep and/or a specific LED pattern on both the scanner and the base.

Funtzionamendu-argibideak

1. Barra-kode bat eskaneatzea:
   • Point the scan window of the Gryphon GM4500 at the barcode you wish to read.
   • Press and hold the trigger button. A red aiming beam or illumination pattern will appear.
   • Position the scanner so the aiming beam covers the entire barcode.
   • Once the barcode is successfully read, the scanner will emit a short beep and/or an indicator light will flash green. The data will be transmitted to your host system.
2. Reading Difficult Barcodes:

   For poorly printed, damaged, or reflective barcodes, try adjusting the distance and angle of the scanner. Sometimes, scanning from a slight angle can improve readability.

3. Bateria mailaren adierazlea:

   The scanner typically has an LED indicator that changes color or flashes to indicate the battery charge level. Refer to the full product manual for specific LED patterns and their meanings.

Mantentzea

• Eskanerra garbitzea:

  Regularly clean the scan window and the exterior of the scanner. Use a soft, lint-free cloth lightly dampened with water or a mild, non-abrasive cleaning solution. Do not use harsh chemicals or abrasive materials, as these can damage the device.

• Bateria zaintzea:

  To prolong battery life, avoid exposing the scanner to extreme temperatures. Charge the battery regularly and avoid completely draining it whenever possible. If the scanner will be stored for an extended period, ensure it has a partial charge (around 50%) and store it in a cool, dry place.

• Biltegiratzea:

  When not in use, store the scanner on its charging base or in a safe location to prevent accidental drops or damage.

Arazoak konpontzea

Zehaztapenak

Bermea eta Laguntza

For detailed warranty information, please refer to the warranty card included with your product or visit the official Datalogic website. For technical support, driver downloads, or further assistance, please contact Datalogic customer service directly.

Fabrikatzailea: Datalogikoa

Webgunea: www.datalogic.com