Sarrera
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Sencor SDC 2800 W Digital Alarm Clock. Please read this manual thoroughly before using the device to ensure proper function and to maximize its lifespan. Keep this manual for future reference.
Produktua amaituview
The Sencor SDC 2800 W is a digital alarm clock designed for clear time display, date, day of the week, and temperature readings. It features two independent alarms and a backlight for visibility in various lighting conditions.
This image displays the Sencor SDC 2800 W Digital Alarm Clock. The large digital display shows the time as 12:58 PM, with a PM indicator and a backlight icon. On the right side, smaller digits indicate the date as December 30th (30.12), the day of the week as Monday (MO), and the current temperature as 20.6°C. Below the temperature, there are two alarm icons, labeled 1 and 2, indicating the presence of two settable alarms. The clock has a white rectangular casing with control buttons visible on the top edge.
Control Buttons (Top Panel)
- SET: Enters setting mode for time, date, and alarms.
- UP/DOWN (▲/▼): Adjusts values during setting mode.
- ALM: Activates/deactivates alarms and enters alarm setting mode.
- SNOOZE/LIGHT: Activates snooze function during an alarm; temporarily illuminates backlight.
Konfigurazioa
Bateriaren instalazioa
- Bilatu bateriaren konpartimentuaren estalkia alarma-erlojuaren atzealdean.
- Remove the cover by sliding or lifting it.
- Insert two (2) AAA batteries (not included) according to the polarity indicators (+ and -) inside the compartment.
- Jarri bateriaren konpartimenduaren estalkia ongi.
- The clock will power on and display default settings or the current time if batteries were already present.
Funtzionamendu-argibideak
Ordua eta data ezartzea
- Eduki sakatuta EZARTU button for approximately 3 seconds until the time display starts flashing.
- Erabili UP or BEHERA botoiak ordua doitzeko. Sakatu EZARTU baieztatzeko.
- Erabili UP or BEHERA botoiak minutuak doitzeko. Sakatu EZARTU baieztatzeko.
- Jarraitu prozesu hau urtea, hilabetea eta eguna ezartzeko.
- After setting the day, press EZARTU to exit the time/date setting mode.
- 12 orduko eta 24 orduko formatuaren artean aldatzeko, sakatu UP button while in normal time display mode. The "PM" indicator will appear for PM hours in 12-hour format.
Alarmak ezartzea (1. alarma eta 2. alarma)
- Sakatu ALM button once to display Alarm 1 time.
- Eduki sakatuta ALM button for approximately 3 seconds until the Alarm 1 time starts flashing.
- Erabili UP or BEHERA buttons to adjust the Alarm 1 hour. Press ALM baieztatzeko.
- Erabili UP or BEHERA buttons to adjust the Alarm 1 minute. Press ALM baieztatzeko.
- Repeat steps 1-4 for Alarm 2 by pressing ALM again after setting Alarm 1.
- Alarma aktibatzeko edo desaktibatzeko, sakatu tekla ALM button repeatedly in normal time display mode until the desired alarm icon (1 or 2) appears or disappears on the display.
Errepikatzeko funtzioa
- Alarma jotzen duenean, sakatu SNOOZE / ARGIA button to temporarily silence the alarm. The alarm will sound again after a few minutes (typically 5-10 minutes).
- To turn off the alarm completely, press any other button (e.g., EZARTU, ALM, UP, BEHERA).
Atzeko argia
- Sakatu SNOOZE / ARGIA button at any time to briefly illuminate the display backlight for better visibility in low light conditions.
Tenperatura bistaratzea
- The clock automatically displays the ambient temperature.
- Celsius (°C) eta Fahrenheit (°F) artean aldatzeko, sakatu BEHERA botoia ordua bistaratzeko modu normalean zauden bitartean.
Mantentzea
- Garbiketa: Wipe the clock clean with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Bateria ordezkatzea: Replace batteries when the display becomes dim or functions become erratic. Always replace both batteries at the same time with new AAA batteries.
- Biltegiratzea: Erlojua denbora luzez erabiliko ez bada, kendu pilak isuriak saihesteko.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Pantaila hutsik edo ilun dago. | Bateriak gutxi daude edo gaizki instalatuta daude. | Ordeztu bateriak AAA bateria berriekin, polaritate zuzena ziurtatuz. |
| Alarmak ez du jotzen. | Alarma ez dago aktibatuta edo gaizki konfiguratuta. | Ensure the alarm icon (1 or 2) is visible on the display. Verify alarm time is set correctly. |
| Ordu/data okerra. | Time/date was not set or reset after battery change. | Follow the "Setting Time and Date" instructions to reset. |
| Tenperaturaren irakurketa okerra dirudi. | Clock is placed near a heat source or in direct sunlight. | Mugitu erlojua giro-tenperatura egonkorra duen leku batera. |
Zehaztapenak
- Marka: SENTOR
- Eredua: SDC 2800 W
- Kolorea: Zuria
- Bistaratzeko mota: Digitala
- Energia iturria: 2 x AAA bateria (ez daude barne)
- Neurriak: 5.08 x 2.64 x 1.57 hazbete (12.9 x 6.7 x 4 cm)
- Elementuaren pisua: 4.8 ontza (137 gramo)
- Ezaugarri bereziak: Alarm, Date, Day of Week, Temperature Display (°C/°F), Backlight
- Materiala: Plastikoa
- Eragiketa modua: Elektrikoa
Bermea eta Laguntza
For warranty information or technical support, please refer to the documentation provided with your purchase or contact Sencor customer service directly. Keep your proof of purchase for warranty claims.
For further assistance, visit the official Sencor webgunea edo jarri harremanetan haien bezeroarentzako arreta-kanalekin.
