24620. orbita

Orbit 24620 irteera bakarreko mahuka txorrotaren tenporizadorea erabiltzailearen eskuliburua

Eredua: 24620 | Marka: Orbita

Sarrera

Thank you for choosing the Orbit 24620 1-Outlet Hose Faucet Timer. This device is designed to automate your watering schedule, providing convenience and efficiency for your lawn and garden. With its user-friendly interface and robust construction, you can easily program precise watering times, helping to conserve water and maintain healthy plants. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your timer.

Segurtasun informazio garrantzitsua

Produktuaren osagaiak

Familiarize yourself with the main parts of your Orbit 1-Outlet Hose Faucet Timer:

Orbit 1 irteerako mahuka txorrotaren tenporizadorea aurrealdean view

1. irudia: Aurrealdea view of the Orbit 1-Outlet Hose Faucet Timer, showing the digital display and control dial. The inlet is at the top, and the outlet is at the bottom.

Konfigurazioa eta Instalazioa

1. Bateriaren instalazioa

  1. Locate the battery compartment on the back or side of the timer.
  2. Remove the battery tray or cover.
  3. Insert two (2) new AA alkaline batteries, ensuring correct polarity (+/-).
  4. Replace the battery tray or cover securely. The display should light up.

2. Attaching the Timer to the Faucet

  1. Ensure your outdoor faucet is turned off.
  2. Thread the timer's inlet connection (top) onto your outdoor faucet.
  3. Hand-tighten until snug. Do not overtighten.
  4. Turn on your faucet fully. The timer is designed to operate under full water pressure.

3. Attaching the Hose

  1. Thread your garden hose onto the timer's outlet connection (bottom).
  2. Eskuz estutu ondo egon arte.
Orbit 1-Outlet Hose Faucet Timer side view

2. irudia: Aldea view of the Orbit 1-Outlet Hose Faucet Timer, showing the robust construction and connections.

Funtzionamendu-argibideak

The Orbit timer features a large digital display and a simple dial for programming. Rotate the dial to select a setting, then use the buttons to adjust values.

1. Ezarri Erlojua

  1. Biratu markatzailea EZARRI ERLOUA.
  2. Orduak keinu egingo du. Erabili + eta - buttons to set the current hour (AM/PM).
  3. Sakatu HURRENGOA button to move to minutes.
  4. Erabili + eta - to set the current minutes.
  5. Sakatu HURRENGOA baieztatzeko.

2. Hasiera Ordua

  1. Biratu markatzailea HASIERA ORDUA.
  2. Set the desired time for watering to begin using the + eta - buttons for hour and minutes.
  3. Sakatu HURRENGOA baieztatzeko.

3. Zenbat denbora (ureztatzeko iraupena)

  1. Biratu markatzailea ZENBAT LUZE.
  2. Set the duration for each watering cycle from 1 to 360 minutes using the + eta - botoiak.
  3. Sakatu HURRENGOA baieztatzeko.

4. Zein maiztasunekin (ureztatzeko maiztasuna)

  1. Biratu markatzailea ZENBAT MAIZ.
  2. Ezarri maiztasuna:
    • Every hour (for short, frequent watering)
    • Every 6, 12 hours
    • Every 1, 2, 3... up to 7 days
  3. Erabili + eta - buttons to select the desired interval.
  4. Sakatu HURRENGOA baieztatzeko.

5. Auto/Manual Operation & Rain Delay

6. Itzali

Biratu markatzailea OFF to stop all automatic and manual watering. The timer will remain off until the dial is moved to another setting.

Mantentzea

Bateria ordezkatzea

When the battery indicator on the display shows low power, or if the display becomes dim, it's time to replace the batteries. Follow the battery installation steps in the "Setup and Installation" section. Replacing batteries typically retains your programmed settings for a short period, but it's good practice to verify them after replacement.

Garbiketa

Garbitu tenporizadorea iragarkiarekinamp cloth to remove dirt or debris. Do not use abrasive cleaners or solvents. Ensure the battery compartment remains dry.

Negugintza

Before the first frost, remove the timer from the faucet. Drain any water from the timer and store it indoors in a dry, protected location where temperatures will not drop below freezing. Remove batteries before storage.

Arazoak konpontzea

ArazoaKausa posibleaIrtenbidea
Timer does not turn on / Display is blank.Bateriak hilda edo gaizki instalatuta.Replace with new alkaline batteries, ensuring correct polarity.
Water does not turn on.
  • Faucet is off.
  • Timer is set to OFF.
  • Incorrect programming (Start Time, How Long, How Often).
  • Rain Delay is active.
  • Uraren presio baxua.
  • Turn faucet on fully.
  • Turn dial to AUTO.
  • Review and adjust programming settings.
  • Check for active Rain Delay and wait for it to expire or cancel it.
  • Ensure adequate water pressure from your faucet.
Water does not turn off.
  • Tenporizadorearen matxura.
  • Debris in valve.
  • Remove batteries for 60 seconds, then reinsert.
  • Disconnect from faucet, check for debris in the inlet screen and valve mechanism.
  • Arazoak jarraitzen badu, jarri harremanetan bezeroarentzako arreta-zerbitzuarekin.
Konexioetatik ihesak.
  • Konexio solteak.
  • Garbigailua falta edo hondatuta.
  • Ensure all connections are hand-tight.
  • Check that the rubber washer is properly seated in the inlet connection. Replace if damaged.

Zehaztapenak

Modelo zenbakia24620
Energia iturria2 x AA bateria alkalino (ez daude barne)
Ureztatzeko Iraupena1 eta 360 minutu
Ureztatze MaiztasunaEvery hour up to every 7 days
Euri-atzerapen aukerak1 eta 7 egun
Funtzionamendu-presioaMinimum 25 PSI, Maximum 100 PSI
Funtzionamendu-tenperatura3 °C - 49 °C (38 °F - 120 °F)
Neurriak7.62 x 18.11 x 22.56 cm (3 x 7.13 x 8.88 hazbete)
Pisua0.42 kg (0.93 lb)
Orbit 1-Outlet Hose Faucet Timer with dimensions

3. irudia: Dimensions of the Orbit 1-Outlet Hose Faucet Timer: 7.62cm depth, 18.11cm height, 22.56cm width.

Bermearen informazioa

Orbit products are manufactured with quality materials and workmanship. For specific warranty details, please refer to the warranty card included with your product or visit the official Orbit webgunea. Gorde erosketa-agiria erosketaren frogagiri gisa.

Bezeroarentzako Arreta

If you have any questions, require technical assistance, or need to troubleshoot issues not covered in this manual, please contact Orbit customer support.

Erlazionatutako dokumentuak - 24620

Aurreview Orbit 2 Outlet Advanced Hose Tirot Timer Erabiltzailearen Eskuliburua eta Programazio Gida
Orbit 2 Outlet Advanced Hose Tire Timer-erako gida osoa, instalazioa, ureztatze ordutegiak programatzea, eskuzko funtzionamendua, euri atzerapen funtzioak, arazoak konpontzeko aholkuak eta segurtasun abisu garrantzitsuak zehaztuz.
Aurreview Orbit 1 Dial 4 Irteerako Mahuka Txorrotako Tenporizadorea: Instalazio eta Programazio Gida
Orbit 1 Dial 4 Outlet Hose Tire Timer-a instalatzeko, programatzeko eta erabiltzeko gida osoa, lorategia modu eraginkorrean ureztatzeko. Ikasi tenporizadorearen ezaugarriei, konfigurazioari, programazio aukerei, euri-atzerapenari eta eskuzko ureztatzeari (adibidez) funtzio gehigarriei eta arazoak konpontzeko aholkuei buruz.
Aurreview Orbit 1 Dial 1 Irteerako Mahuka Txorrotako Tenporizadorearen Erabiltzailearen Gida
Orbit 1 Dial 1 Outlet Hose Tire Timer-erako erabiltzailearen eskuliburua, programazioa, euriaren atzerapena eta eskuzko ureztatzea bezalako funtzioak eta arazoak konpontzea zehaztuz.
Aurreview Orbit 1 Dial 1 Irteerako Mahuka Txorrotako Tenporizadorea: Erabiltzailearen Gida eta Programazioa
Ikasi zure Orbit 1 Dial 1 Outlet Hose Tire Timer-a nola instalatu, programatu eta erabili lorategia modu eraginkorrean ureztatzeko. Ezaugarriak, konfigurazioa eta arazoak konpontzea barne hartzen ditu.
Aurreview Orbit 1 Irteerako Mahuka Txorrotaren Tenporizadorea: Erabiltzailearen Eskuliburua eta Programazio Gida
Orbit 1 irteerako mahuka-txorrotako tenporizadorea programatzeko eta erabiltzeko gida osoa. Ikasi euri-atzerapena, eskuzko ureztatzea eta arazo ohikoenak konpontzea bezalako funtzioei buruz.
Aurreview Orbit 3-entxufeko tenporizadore digitala: programazio, instalazio eta arazoak konpontzeko gida
Lorategiak modu eraginkorrean ureztatzeko Orbit 3-Outlet tenporizadore digitala instalatzeko, programatzeko eta arazoak konpontzeko gida osoa. Ikasi eskuzko eta automatikoko ureztatze moduak, euri-atzerapen funtzioak eta produktuaren osagaiak.