1. Sarrera
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your FABER 2740 SRM 60cm under-cabinet cooker hood. Please read these instructions carefully before using the appliance and retain them for future reference.
2. Segurtasun informazioa
- Ziurtatu instalazio elektrikoak tokiko segurtasun-arauak betetzen dituela.
- Ez utzi haurrei aparatua erabiltzen.
- Garbitu aldizka koipe-iragazkiak sute arriskuak saihesteko.
- Ez ezazu flamekatu sukaldeko kanpaiaren azpian.
- Ensure adequate ventilation when the hood is used simultaneously with gas or other fuel-burning appliances.
- Deskonektatu gailua elikadura-iturritik garbiketa edo mantentze-lanak egin aurretik.
3. Produktua amaitu daview
The FABER 2740 SRM is a 60cm under-cabinet cooker hood designed for integration into kitchen cabinets. It features 3W LED lighting for illuminating the cooking area and offers three adjustable suction power levels.
Figure 1: FABER 2740 SRM cooker hood installed under a kitchen cabinet, showcasinbere diseinu integratua.
4. Instalazioa
The cooker hood can be installed in two modes: ducted (external extraction) or recirculating (internal filtration).
4.1 Muntaketa
Refer to the provided technical diagram for precise measurements and mounting points. The hood is designed for under-cabinet installation.
Figure 2: Technical drawing with dimensions for FABER 2740 SRM cooker hood installation. Ensure cabinet and ducting clearances are met.
4.2 Ducted Mode (External Extraction)
In ducted mode, cooking fumes are expelled outside the home through an exhaust duct (not included). Ensure the ducting is correctly sized and sealed to maximize efficiency.
Figure 3: Diagram showing ducted extraction mode, where air is vented outside.
4.3 Recirculating Mode (Internal Filtration)
If external air evacuation is not possible, the hood can operate in recirculating mode. This requires the installation of activated carbon filters (not included) to purify cooking odors before releasing clean air back into the kitchen environment.
Figure 4: Diagram showing recirculating filtration mode, where air is filtered and returned to the kitchen.
5. Funtzionamendu-argibideak
The FABER 2740 SRM features push-button controls for managing suction speed and lighting.
5.1 Kontrolak
The control panel typically consists of buttons for:
- Piztu/Itzali: Kanpaia aktibatzen edo desaktibatzen du.
- Abiadura aukeraketa: Adjusts the motor speed (Level 1, 2, or 3).
- Argia piztu/itzali: Controls the LED lighting.
5.2 Abiadura ezarpenak
Aukeratu abiadura maila egokia sukaldaritza-kearen intentsitatearen arabera:
- 1. maila: Sukaldaritza arin baterako, su motelean egosita.
- 2. maila: For normal cooking, moderate fumes.
- 3. maila: Sukaldaritza intentsiborako, frijitzeko edo usain indartsuetarako.
5.3 Argiztapena
Press the light button to turn the 3W LED lighting on or off, providing illumination for your cooking surface.
6. Mantentzea
Mantentze-lan erregularrak zure sukaldeko kanpaiaren errendimendu optimoa eta iraupen luzea bermatzen ditu.
6.1 Metal Anti-Grease Filters
The hood includes metal anti-grease filters designed to capture cooking grease. These filters should be cleaned approximately once a month, depending on usage. They are easy to remove and are dishwasher-safe.
Figure 5: Metal anti-grease filters. These should be cleaned regularly.
6.2 Activated Carbon Filters (Optional)
For recirculating mode, activated carbon filters (not included) are required to remove odors. These filters cannot be washed and must be replaced approximately every 3 months, or more frequently with heavy use. Use only original FABER filters to ensure compatibility and performance.
Figure 6: Activated carbon filters. These are essential for odor removal in recirculating mode.
7. Arazoak
Sukaldeko kanpaiarekin arazoak badituzu, jo ezazu honako arazo eta irtenbide ohikoenei:
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Kaputxa ez da pizten | No power supply; Power cord disconnected; Fuse blown. | Check power connection; Check circuit breaker/fuse box. |
| Xurgatze potentzia baxua | Grease filters clogged; Activated carbon filters saturated (recirculating mode); Ducting obstructed or too long/narrow. | Clean grease filters; Replace activated carbon filters; Check ducting for obstructions. |
| Gehiegizko zarata | Loose components; Incorrect installation; Obstruction in fan. | Check for loose screws; Ensure correct installation; Inspect fan for foreign objects. |
| Argiak ez dira funtzionatzen | Bulb faulty; Electrical connection issue. | Replace LED bulb (if replaceable); Check electrical connections. |
Irtenbide hauek saiatu ondoren arazoa konponbide hauek konpontzen ez badira, jarri harremanetan zerbitzu-langile kualifikatuekin.
8. Zehaztapenak
Technical details for the FABER 2740 SRM cooker hood:
- Modelo zenbakia: 300.0557.576
- Neurriak (L x W x H): 59.8 x 48.6 x 15 cm
- Pisua: 8.6 kilogramo
- Materiala: Altzairuzko aleazioa
- Muntatze mota: Armairu azpikoa
- Kontrol mota: Sakatu botoia
- Aireztapen mota: Ducted or Recirculating
- Aire-fluxuaren edukiera: 380 metro kubiko orduko
- Zarata maila: 70 dezibelio (gehienez)
- Argi iturri mota: LED (3 W)
- Energia-eraginkortasun klasea: D
- Iragazki mota: Metal Anti-Grease (included), Activated Carbon (compatible, not included)
Figure 7: Energy efficiency label for the FABER 2740 SRM cooker hood.
9. Bermea eta Laguntza
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or spare parts, please contact FABER customer service or visit the official FABER webgunea.
Ensure to have your model number (2740 SRM or 300.0557.576) and purchase date available when contacting support.
