FLYLINKTECH Battery Jump Starter User Manual

Sarrera

Thank you for choosing the FLYLINKTECH Battery Jump Starter. This portable device is designed to provide a powerful boost to your vehicle's battery, act as a portable power bank for electronic devices, and offer an integrated LED flashlight for emergencies. Please read this manual thoroughly before using the product to ensure safe and optimal performance.

Segurtasun Informazioa

Bete beti segurtasun neurri hauek gailuari edo ibilgailuari lesioak edo kalteak saihesteko:

• Ez saiatu salto izoztutako bateria bat abiarazten.
• Ensure proper polarity connection (positive to positive, negative to negative) to avoid sparks or damage.
• Ez utzi cl gorria eta beltzaamps elkar ukitzeko.
• Mantendu gailua haurrengandik urrun.
• Ez jarri gailua euripean edo tenperatura altuetan.
• Gorde leku fresko eta lehor batean erabiltzen ez duzunean.
• Bateria clamps are connected incorrectly, the smart cable will typically alert you with an indicator light or sound. Disconnect immediately and re-connect correctly.
• Deskonektatu beti clamps from the vehicle battery first, then from the jump starter, after a successful jump start.

Paketearen edukia

Egiaztatu elementu guztiak zure paketean daudela:

• FLYLINKTECH Battery Jump Starter Unit
• Smart Jumper Cables with Clamps (Gorria eta Beltza)
• USB kargatzeko kablea
• EC5 Car Cigarette Lighter Adapter
• Erabiltzailearen eskuliburua (dokumentu hau)

Image: The FLYLINKTECH Battery Jump Starter unit, black with red accents, shown alongside its accessories: smart jumper cables (red and black clamps), a USB charging cable, and an EC5 car cigarette lighter adapter.

Produktua amaituview

Familiarize yourself with the main components of your jump starter:

• Pizteko botoia: Activates the unit and checks battery level.
• LED adierazle argiak: Show the remaining battery capacity (e.g., 4 lights for full charge).
• Abiarazteko ataka: Connects to the smart jumper cables.
• USB Output Ports: For charging mobile phones, tablets, and other USB-powered devices.
• Mikro USB sarrera ataka: Abiarazle-unitatea kargatzeko.
• LED linterna: Argi integratua argiztatzeko.

Konfigurazioa

Hasierako karga

Before first use, fully charge the jump starter. It is recommended to charge the unit every 3-6 months to maintain battery health, even if not in use.

1. Connect the Micro USB end of the provided USB charging cable to the jump starter's input port.
2. Connect the USB-A end of the cable to a 5V/2A USB wall adapter (not included) or a computer USB port.
3. LED adierazle-argiak keinuka arituko dira kargatzen ari den bitartean eta finko mantenduko dira guztiz kargatuta dagoenean.

Funtzionamendu-argibideak

Jauzi Ibilgailu bat abiaraztean

Ensure the jump starter is at least 50% charged (at least 2 LED indicator lights are solid) before attempting a jump start.

1. Turn off the vehicle's ignition and all accessories (lights, radio, A/C).
2. Konektatu kable gorria (positiboa, +)amp of the smart jumper cables to the positive (+) terminal of the vehicle's battery.
3. Konektatu cl beltza (negatiboa, -)amp of the smart jumper cables to the negative (-) terminal of the vehicle's battery.
4. Plug the blue connector end of the smart jumper cables into the jump start port on the jump starter unit. Ensure a firm connection.
5. Check the indicator light on the smart jumper cable. A solid green light indicates a correct connection and readiness to jump start. If it's red or flashing, check connections and polarity.
6. Start the vehicle's engine. If it doesn't start immediately, wait 30 seconds and try again. Do not crank for more than 3 seconds per attempt.
7. Once the vehicle starts, immediately disconnect the blue connector from the jump starter unit.
8. Then, disconnect the black (-) clamp ibilgailuaren bateriatik, eta ondoren (+) cl gorriaamp.

Power Bank eramangarri gisa erabiltzea

Abiarazleak hainbat gailu elektroniko kargatu ditzake USB irteerako ataken bidez.

1. Konektatu zure gailuaren USB kargatzeko kablea abiarazlearen USB irteerako ataka batera.
2. Press the power button on the jump starter to begin charging. The LED indicator lights will show the remaining battery level.
3. Disconnect your device once charging is complete. The jump starter will automatically turn off after a period of inactivity.

LED linterna erabiliz

The integrated LED flashlight has multiple modes for different situations.

1. Linterna pizteko, sakatu eta eutsi pizteko botoia 3 segundo inguru.
2. Press the power button again to cycle through modes: Solid light > SOS signal > Strobe light.
3. Press and hold the power button again for 3 seconds to turn off the flashlight.

Mantentzea

• Kargatzen: Recharge the unit after each jump start. For optimal battery life, recharge every 3-6 months even if not used.
• Garbiketa: Garbitu unitatea zapi lehor eta leun batekin. Ez erabili produktu kimiko gogorrik edo garbitzaile urratzailerik.
• Biltegiratzea: Store the jump starter in a cool, dry place, away from direct sunlight and extreme temperatures.

Arazoak konpontzea

Zehaztapenak

• Marka: FLYLINKTECH
• Eredua: CF200
• Korronte gailurra: 1500A
• Funtzionamendua Amparoa: 1000 Amps
• Bateria mota: 12V (barne)
• Motorra bateragarritasuna: Up to 6.0L Gas or 5.0L Diesel engines
• Produktuaren neurriak: 6.22 x 3.35 x 0.83 hazbete
• Elementuaren pisua: 1.7 kilo
• UPC: 886871087216

Note: The 1500A peak current refers to the maximum instantaneous current the unit can deliver. The operating amperage is typically lower.

Bermea eta Laguntza

FLYLINKTECH products are manufactured to the highest quality standards. For warranty information, technical support, or customer service inquiries, please refer to the contact information provided on the product packaging or visit the official FLYLINKTECH website. Please have your model number (CF200) and purchase date ready when contacting support.