1. Sarrera
This manual provides instructions for the safe and effective operation, maintenance, and troubleshooting of the FLYLINKTECH 1500A Peak 20000mAh Car Jump Starter. Please read this manual thoroughly before using the product and retain it for future reference.
Image 1.1: FLYLINKTECH Car Jump Starter unit, smart clamps, charging cables, and storage case.
2. Produktua amaitu daview
2.1 Paketearen edukia
- FLYLINKTECH 1500A Peak 20000mAh Car Jump Starter Unit
- Intelligent Jumper Clamps
- USB kargatzeko kablea
- C motako karga-kablea
- Erabiltzailearen eskuliburua
- Biltegiratze-zorroa
Image 2.1: Visual representation of the product package contents.
2.2 Ezaugarri nagusiak
- Edukiera handia: 20000mAh battery for multiple jump starts and device charging.
- Abiarazteko jauzi indartsua: 1500A peak current capable of starting 12V vehicles (all petrol engines or up to 7.0L diesel engines).
- Multi-functional Power Bank: Two Quick Charge 3.0 USB outputs (5V/3A, 9V/2A) for charging smartphones, tablets, and other USB-powered devices.
- Emergency LED Flashlight: Features Normal, SOS, and Strobe lighting modes.
- IP68 Iragazgaitzaren balorazioa: Provides protection against water and dust ingress.
- Babes sistema adimenduna: Integrated intelligent clamps offer protection against over-discharge, short circuit, overload, overcurrent, reverse protection, over temperature, reverse polarity, and reverse connection.
2.3 Product Components and Controls
2.2. irudia: Amaituview of the jump starter's buttons, ports, and indicators.
- ON/OFF Button (Multifunctional): Powers the unit on/off and controls flashlight modes.
- Kargatze adierazleen argiak: Four blue LEDs indicate the battery charge level.
- Output 1, QC3.0: USB-A port for quick charging external devices.
- Output 2, QC3.0: USB-A port for quick charging external devices.
- C motako sarrera: USB-C port for charging the jump starter unit.
- Mikro sarrera: Micro-USB port for charging the jump starter unit.
- Abiarazteko ataka: Dedicated port for connecting the intelligent jumper clamps.
- Linterna: Integrated LED light.
3. Segurtasun informazioa
Read all safety warnings and instructions before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
- Do not attempt to jump start a vehicle if the jump starter unit is below 50% charge.
- Ensure proper polarity when connecting the jumper clamps ibilgailuaren bateriara. Gorria clamp positiboa (+), KL beltzaamp negatibora (-).
- Ez ukitu cl gorria eta beltzaampelkarrekin lotzen dira jauzi-abiarazlera konektatu ondoren.
- Do not expose the product to extreme temperatures or direct sunlight for extended periods.
- Mantendu haurren eskura.
- Do not disassemble, modify, or attempt to repair the unit.
- If the unit becomes excessively hot during use, discontinue use immediately.
- Klik adimendunaamps incorporate multiple protection features:
3.1. irudia: Amaituview of the intelligent clamp's safety features.
- Gehiegizko isurketa babesa
- Zirkuitu Laburren Babesa
- Gainkargaren babesa
- Gainkorrontearen babesa
- Alderantzizko babesa
- Tenperaturaren gaineko babesa
- Alderantzizko polaritatearen babesa
- Alderantzizko konexioaren babesa
4. Konfigurazioa
4.1 Abiarazle elektrikoa kargatzea
Before first use, fully charge the jump starter unit. It is recommended to charge the unit every 3-6 months to maintain battery health, even if not in use.
- Connect the provided USB or Type-C charging cable to the corresponding input port on the jump starter unit.
- Connect the other end of the charging cable to a USB wall adapter (not included) or a powered USB port.
- The charging indicator lights will illuminate and flash to show the charging progress. All four lights will be solid when fully charged.
5. Funtzionamendu-argibideak
5.1 Ibilgailu bat abiaraztea
Ensure the jump starter unit has at least 50% charge before attempting to jump start a vehicle.
Image 5.1: The jump starter is suitable for various 12V vehicles, including cars, SUVs, vans, pickup trucks, motorcycles, and more.
- Itzali ibilgailuaren piztea eta osagarri guztiak.
- Connect the blue plug of the intelligent jumper clamps into the jump starting port on the jump starter unit. Ensure a firm connection.
- Konektatu gorria (+) clamp ibilgailuaren bateriaren terminal positiboan.
- Konektatu beltza (-) clamp ibilgailuaren bateriaren terminal negatibora.
- Behin clamps are correctly connected, the indicator light on the intelligent clamps will turn green, indicating it is safe to proceed. If it shows red or flashes, check connections and refer to the troubleshooting section.
- Piztu ibilgailuaren motorra.
- Ibilgailua martxan jartzen denean, deskonektatu berehala beltza (-) clamp from the vehicle battery, followed by the gorria (+) clamp.
- Disconnect the intelligent jumper clamps from the jump starter unit.
Image 5.2: Proper connection of jumper clamps to a vehicle battery.
5.2 Kanpoko gailuak kargatzea
The jump starter can function as a power bank to charge various USB-powered devices.
Image 5.3: The jump starter can charge devices like phones, tablets, and cameras.
- Connect your device's USB charging cable to one of the Quick Charge 3.0 USB output ports (Output 1 or Output 2) on the jump starter unit.
- Konektatu kablearen beste muturra zure gailura.
- The jump starter will automatically begin charging your device. The charging indicator lights will show the remaining battery level.
5.3 LED linterna erabiltzea
The integrated LED flashlight offers multiple lighting modes for emergency situations or general illumination.
Image 5.4: The LED flashlight offers Normal, SOS, and Strobe modes.
- Press and hold the ON/OFF button for approximately 3 seconds to turn on the flashlight in Normal mode.
- Press the ON/OFF button briefly to cycle through the modes: Normal > SOS > Strobe > Off.
- To turn off the flashlight from any mode, press and hold the ON/OFF button for approximately 3 seconds.
6. Mantentzea
- Kargatzen: Recharge the jump starter unit every 3-6 months, even if not used, to prolong battery life.
- Garbiketa: Garbitu unitatea zapi leun eta lehor batekin. Ez erabili produktu kimiko gogorrik edo garbitzaile urratzailerik.
- Biltegiratzea: Store the jump starter in its provided storage case in a cool, dry place, away from direct sunlight and extreme temperatures.
- Bateria zaintzea: Avoid fully discharging the unit frequently, as this can reduce battery lifespan.
7. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Abiarazle elektrikoak ez du pizten. | Bateria guztiz deskargatuta dago. | Charge the jump starter unit. |
| Vehicle does not start after jump starting attempt. | Okerra clamp konexioa. Abiarazlearen bateria baxuegia da. Ibilgailuaren bateria larriki kaltetuta. Vehicle issue unrelated to battery. | Egiaztatu clamp connections (red to +, black to -). Ensure jump starter is sufficiently charged (above 50%). Consult a mechanic if the issue persists. |
| Klik adimendunaamp adierazle-argia gorri edo keinuka ari da. | Reverse polarity, short circuit, or other protection activated. | Deskonektatu clamps from vehicle battery and jump starter. Re-check connections for correct polarity and ensure clamps are not touching. Refer to safety information. |
| Kanpoko gailua ez da kargatzen. | Abiarazlearen bateria baxuegia da. Kablearen konexio okerra. Gailua ez da bateragarria. | Charge the jump starter. Ensure USB cable is properly connected to both the jump starter and the device. Try a different USB port or cable. |
Konponbide hauek saiatu ondoren arazoa konpontzen ez bada, jarri harremanetan bezeroarentzako arreta-zerbitzuarekin.
8. Zehaztapenak
| Ezaugarri | Zehaztapena |
|---|---|
| Eredua | CF100 |
| Bateria Edukiera | 20000mAh |
| Goiko Korronte | 1500A |
| Hasi Korrontea | 750A |
| Ibilgailuen bateragarritasuna | 12V vehicles (All Petrol, up to 7.0L Diesel) |
| USB irteera 1 (QC3.0) | 5V/3A, 9V/2A |
| USB irteera 2 (QC3.0) | 5V/3A, 9V/2A |
| USB-C sarrera | 5V/2A |
| Mikro-USB sarrera | 5V/2A |
| Iragazgaitzaren balorazioa | IP68 |
| LED linterna moduak | Normal, SOS, Strobe |
| Bateria mota | Litio ioia |
| Produktuaren neurriak (gutxi gorabehera) | 183 mm x 88 mm x 36 mm |
| Elementuaren pisua | 544 g |
| Segurtasun Ziurtagiriak | CE, FCC, RoHs, UL, UN38.3 |
9. Bermea eta Laguntza
9.1 Bermearen informazioa
This FLYLINKTECH product comes with a 24 hilabeteko bermea erosketa-datatik aurrera. Berme honek fabrikazio-akatsak eta erabilera normalaren ondoriozko arazoak estaltzen ditu.
9.2 Bezeroarentzako laguntza
If you have any questions, encounter problems during use, or require technical assistance, please contact our professional technical team. You can reach us through the Amazon purchase message system.
Our support team aims to respond and help resolve issues within 24 hours.
