ONKRON G120-BLK Monitore Bakarreko Hormako Euskarrirako Argibideen Eskuliburua
Model: G120-BLK
Sarrera
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your ONKRON G120-BLK Single Monitor Wall Mount. Please read this manual thoroughly before installation and retain it for future reference.
Image: The ONKRON G120-BLK Single Monitor Wall Mount, a black articulating arm designed for wall mounting.
Segurtasun Informazioa
WARNING: Improper installation or use of this product may result in serious injury or damage. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer or ONKRON customer support.
- Ziurtatu muntatzeko gainazalak euskarriaren eta monitorearen pisu konbinatua segurtasunez eutsi dezakeela.
- Ez gainditu 17.6 lb-ko (8 kg) gehienezko pisu-gaitasuna.
- Euskarri hau 13 eta 34 hazbete arteko monitoreetarako diseinatuta dago.
- Always use the provided hardware. If any parts are missing or defective, contact ONKRON for replacement.
- Exercise caution when handling the gas spring mechanism. The spring is under tension and can cause injury if not handled correctly. Do not remove plastic covers over the main poles as they are for protection.
- Mantendu haurrak eta maskotak urrun instalatzean.
Paketearen edukia
Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela.
Image: All components included in the ONKRON G120-BLK package, including the mount, various screws, washers, wall anchors, and an Allen key.
- Monitor Wall Mount Assembly
- VESA Plaka
- Horma-plaka
- Mounting Hardware (screws, anchors, washers for various VESA sizes)
- Allen giltza (6 mm)
- Argibide eskuliburua
Konfigurazioa eta Instalazioa
Follow these steps carefully for a secure installation. It is recommended to have a second person assist during monitor attachment.
Instalazio Bideo Gida
Video: An official ONKRON instruction video demonstrating the installation process for the G120-B monitor mount.
1. urratsa: zulatzeko zuloak markatzea
- Determine the desired mounting location on your wall. Ensure it is a solid surface (e.g., wood stud, concrete) capable of supporting the weight.
- Hold the wall plate against the wall at the desired height and use a pencil to mark the drill hole locations.
Image: The ONKRON G120-BLK monitor mount securely installed on a brick wall, demonstrating a typical mounting scenario.
2. urratsa: Muntaia instalatzea
- Drill pilot holes at the marked locations. The drill bit size will depend on your wall material and the anchors used.
- Secure the wall plate to the wall using the appropriate screws and anchors. Ensure it is firmly attached and level.
Step 3: Attaching the Monitor to the Mount
- Attach the VESA plate to the back of your monitor using the correct screws (M4 or M6) that fit your monitor's VESA pattern (75x75mm or 100x100mm). Ensure the screws are tightened securely but do not overtighten.
- Carefully lift the monitor and slide the VESA plate onto the arm's mounting head. Ensure it clicks into place or is secured with the provided locking mechanism.
Image: Diagram illustrating VESA 75x75mm and 100x100mm mounting patterns, compatible screen diagonal (13"-34"), and load capacity (2.2-17.6 lbs).
Step 4: Adjusting for Monitor Weight (Gas Spring Tension)
The gas spring tension must be adjusted after the monitor is attached to ensure it holds its position. If the monitor sags or springs up, adjust the tension.
- Locate the gas spring adjustment screw on the arm.
- Use the provided Allen key to turn the screw:
- Piztu erlojuaren kontrako noranzkoan for lighter screens (to reduce tension).
- Piztu erlojuaren orratzen noranzkoan for heavier screens (to increase tension).
- Adjust gradually until the monitor stays in the desired vertical position when released.
Image: Close-up of the gas spring adjustment point on the monitor arm, showing the Allen key inserted and directional arrows for adjusting tension for lighter or heavier screens.
Operating the Monitor Mount
The ONKRON G120-BLK offers a range of adjustments for optimal viewerosotasuna.
- Altuera doitzea: The arm allows for 11 inches (28 cm) of vertical height adjustment. Gently push or pull the monitor to the desired height.
- Luzapena/Atzerapena: The arm can extend from 3.5 inches (8.9 cm) to 13.7 inches (34.8 cm) from the wall.
- okertu: Adjust the monitor tilt from +90° to -45° to reduce glare and find your preferred viewangelua.
- Birakaria: Swivel the monitor 180° left or right.
- Errotazioa: Rotate the monitor 360° for landscape or portrait orientation.
Image: Four panels demonstrating the full motion capabilities of the mount: 180° swivel, 360° rotation, +90° to -45° tilt, and 11 inches of height adjustment.
Kableen kudeaketa
Erabili kableen kudeaketa sistema integratua zure lan-eremua txukun mantentzeko.
- Route monitor cables through the channels on the underside of the arm.
- Secure the cables using the provided clips or covers to maintain a clean appearance.
Irudia: Gertuko planoa view of the monitor arm showing a cable neatly routed through the integrated cable management channel.
Mantentzea
Regular maintenance ensures the longevity and optimal performance of your monitor mount.
- Garbiketa: Garbitu euskarria zapi leun batekin,amp oihal. Saihestu garbitzaile edo disolbatzaile urratzaileak.
- Aldizkako egiaztapenak: Aldian-aldian egiaztatu torloju eta konexio guztiak ondo estututa daudela ziurtatzeko. Beharrezkoa bada, berriro estutu.
- Gas malgukiaren doikuntza: If your monitor's weight changes or if the arm no longer holds its position, re-adjust the gas spring tension as described in the Setup section.
Arazoak konpontzea
Atal honetan ohiko arazoen irtenbideak aurkituko dituzu.
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Monitorea hondoratzen da edo ez da nahi den altueran mantentzen. | Gas malgukiaren tentsioa baxuegia da monitorearen pisurako. | Increase gas spring tension by turning the adjustment screw clockwise with the Allen key. Refer to 'Adjusting for Monitor Weight' in the Setup section. |
| Monitor springs up or is difficult to push down. | Gas malgukiaren tentsioa altuegia da monitorearen pisurako. | Decrease gas spring tension by turning the adjustment screw counter-clockwise with the Allen key. Refer to 'Adjusting for Monitor Weight' in the Setup section. |
| Muntaketa ezegonkorra edo dardartia sentitzen da. | Loose connections or improper wall installation. | Check all mounting screws on the wall plate and VESA plate. Ensure they are securely tightened. Verify the wall can support the mount and monitor. |
| Difficulty with monitor movement (tilt, swivel, rotation). | Loturak gehiegi estututa daude. | Some joints may have adjustable tension screws. Loosen slightly if movement is too stiff. Do not over-loosen. |
Zehaztapenak
- Eredua: G120-BLK
- Pantailaren tamainaren bateragarritasuna: 13 - 34 hazbete
- Pisu-gaitasuna: 2.2 - 17.6 lb (1 - 8 kg)
- VESA bateragarritasuna: 75x75mm, 100x100mm
- Inklinazio angelua: +90°-tik -45°-ra
- Angelu birakaria: 180°
- Errotazioa: 360°
- Altuera doitzea: 11 hazbete (28 cm)
- Besoen luzapena: 3.5 hazbete (8.9 cm) eta 13.7 hazbete (34.8 cm) artean
- Materiala: Aluminioa
- Produktuaren neurriak: 16.34 x 2.28 x 6.61 hazbete (41.5 x 5.8 x 16.8 cm)
- Elementuaren pisua: 3.96 libra (1.8 kg)
Bermea eta Laguntza
ONKRON products are manufactured with quality and durability in mind. For specific warranty details, please refer to the warranty card included with your product or visit the official ONKRON webgunea.
If you encounter any issues or have questions regarding your ONKRON G120-BLK monitor mount, please contact ONKRON customer support for assistance. Our experts are available to help.
Harremanetarako informazioa: Please refer to the ONKRON webgunea edo produktuaren ontzia kontaktu datu eguneratuenak lortzeko.
