Intelbras IVP 2000 SF Wireless Passive Infrared Sensor Instruction Manual

1. Sarrera

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Intelbras IVP 2000 SF Wireless Passive Infrared Sensor. This device is designed to detect motion by sensing infrared radiation emitted by moving objects, providing an essential component for security systems.

2. Segurtasun informazioa

• Irakurri arretaz argibide guztiak instalatu eta martxan jarri aurretik.
• Do not expose the sensor to direct sunlight, extreme temperatures, or high humidity.
• Ensure the device is installed in a stable location to prevent accidental falls.
• Only use the specified battery type. Incorrect battery usage may cause damage or malfunction.
• Mantendu gailua haurren eskura.

3. Paketearen edukia

Egiaztatu elementu guztiak paketean daudela:

• 1x Intelbras IVP 2000 SF Wireless Passive Infrared Sensor
• 1x Muntatzeko euskarria
• 1x Set of Screws and Wall Plugs
• 1x Battery (Alkaline)
• 1x Quick Start Guide (this manual)

4. Produktua amaitu daview

The Intelbras IVP 2000 SF is a wireless passive infrared sensor designed for indoor use. It features advanced detection technology to minimize false alarms and ensure reliable security monitoring.

1. irudia: Aurrealdea view of the Intelbras IVP 2000 SF sensor. This image displays the white casing of the sensor with the Intelbras logo and "IVP 2000 SF" model designation clearly visible on the top front. The translucent detection lens is prominent on the lower front section.

Funtsezko osagaiak:

• PIR Lens: Detects infrared radiation from moving bodies.
• LED adierazlea: Provides status feedback (e.g., detection, low battery).
• Bateriaren konpartimendua: Houses the power source.
• Muntatze puntuak: For secure installation on a wall.
• Tamper Aldatu: Triggers an alarm if the sensor cover is opened.

5. Konfigurazioa

5.1. Bateriaren instalazioa

1. Open the sensor's front cover by gently prying it open from the bottom notch.
2. Insert the provided alkaline battery into the battery compartment, observing the correct polarity (+/-).
3. Close the front cover, ensuring it clicks securely into place.

5.2. Sentsorea muntatzea

The sensor is designed for wall mounting. Choose a location that provides optimal coverage of the area to be protected, avoiding direct heat sources or air conditioning vents.

1. Select a mounting height between 2.0 to 2.2 meters (6.5 to 7.2 feet) from the floor.
2. Erabili muntatzeko euskarria txantiloi gisa horman torloju-posizioak markatzeko.
3. Egin zuloak markatutako posizioetan eta sartu hormako takoak.
4. Lotu muntatzeko euskarria horman emandako torlojuak erabiliz.
5. Attach the sensor unit to the mounting bracket, ensuring it is firmly seated.

5.3. Pairing with a Security System

Refer to your Intelbras security system or smart hub manual for specific instructions on how to add a new wireless sensor. Generally, the process involves:

1. Putting your security system into "pairing" or "enrollment" mode.
2. Activating the sensor (e.g., by triggering it or pressing a specific button, if available, or by installing the battery for the first time).
3. Confirming successful pairing through the system's interface or LED indicators.

6. Sentsorearen funtzionamendua

6.1. Detection Principle

The IVP 2000 SF sensor operates on the principle of passive infrared (PIR) detection. It detects changes in infrared energy within its field of view, which are typically caused by the movement of a warm body. When a significant change is detected, the sensor transmits a signal to the connected security system.

6.2. LED adierazlearen egoera

• Brief Flash: Indicates motion detection.
• Continuous Flash: May indicate low battery or a fault. Refer to the troubleshooting section.
• Argirik gabe: Normal standby mode, or battery is completely depleted.

6.3. Detection Range and Coverage

The sensor typically offers a detection range of up to 12 meters (39 feet) with a coverage angle of approximately 90 degrees. Optimal performance is achieved when movement occurs across the sensor's field of view rather than directly towards it.

7. Mantentzea

7.1. Garbiketa

Periodically clean the sensor's lens and casing with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device.

7.2. Bateria ordezkatzea

When the LED indicator signals a low battery (e.g., continuous flashing or specific system notification), replace the battery promptly. Follow the battery installation steps outlined in section 5.1. Dispose of old batteries according to local regulations.

7.3. Ohiko egiaztapenak

Test the sensor's functionality regularly (e.g., monthly) by walking through its detection zone to ensure it triggers an alarm or notification on your security system.

8. Arazoak

9. Zehaztapenak

• Marka: Intelbras
• Eredua: IVP2000SF
• Energia iturria: Bateriaren bidez
• Bateria mota: Alkalinoa
• Muntatze mota: Hormako muntaia
• Gailu bateragarriak: Intelbras security systems and smart home hubs
• Produktuaren neurriak: Gutxi gorabehera 17 x 10 x 9 cm (6.7 x 3.9 x 3.5 hazbete)
• Detektatzeko metodoa: Infragorri pasiboak (PIR)
• Detektatzeko tartea: Gehienez 12 metro (39 oin)
• Detekzio angelua: 90 gradu inguru
• Ingurune operatiboa: Barruko erabilera soilik

10. Bermearen informazioa

Intelbras products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Intelbras webwebgunera edo jarri harremanetan bezeroarentzako arreta-zerbitzura. Gorde erosketaren frogagiria berme-erreklamazioetarako.

11. Laguntza

If you encounter any issues or have questions regarding your Intelbras IVP 2000 SF sensor that are not covered in this manual, please contact Intelbras customer support through their official channels:

• Webgunea: Bisitatu Intelbras ofiziala weblaguntza baliabideetarako, maiz egiten diren galderetarako eta harremanetarako informaziorako gunea.
• Telefonoa: Refer to the contact section on the Intelbras webtokiko laguntza-zenbakien gunea.