1. Sarrera
This manual provides instructions for the installation, operation, and maintenance of the Zerone DAB DAB+ Radio Receiver Antenna. This product is designed to enhance digital audio broadcasting (DAB and DAB+) signal reception in vehicles.
The antenna features a compact design and is intended for discreet installation within a vehicle's interior, such as under the windshield.
Figure 1: Zerone DAB DAB+ Radio Receiver Antenna. This image shows the complete antenna unit, including the main receiver module, the flexible antenna element, and the connected MCX male cable.
2. Konfigurazioa eta instalazioa
Instalazio egokia ezinbestekoa da errendimendu optimoa lortzeko. Jarraitu urrats hauek arretaz:
- Hautatu instalazioaren kokapena: The antenna can be installed under the windshield of the rear window or under the windshield of the front window. Choose a location that provides clear line-of-sight to the sky and minimizes obstructions.
- Azalera garbia: Ensure the chosen surface is clean, dry, and free of dust or grease to ensure proper adhesion of the antenna's patching mechanism.
- Antena lotu: Carefully peel off the protective backing from the adhesive side of the antenna element and firmly press it onto the selected clean surface.
- Hartzailera konektatu: Connect the MCX male connector of the antenna cable to the corresponding MCX female port on your DAB/DAB+ radio receiver unit. Ensure the connection is secure.
- Potentzia-konexioa: The antenna requires a DC5V or DC12V power supply. Connect the antenna's power input to a compatible power source in your vehicle. Refer to your radio receiver's manual for specific power output details.
2. irudia: Adibample installation of the antenna on a car dashboard. This image illustrates how the antenna can be discreetly placed on the vehicle's interior, highlighting its compact form factor.
3. irudia: hurbileko planoa view of the MCX male connector. This image details the connector type used for interfacing the antenna with a compatible radio receiver.
3. Funtzionamendu-argibideak
Once the antenna is correctly installed and connected to your DAB/DAB+ radio receiver, follow your receiver's instructions to scan for available digital radio stations.
- The antenna is designed to receive signals within the operating frequencies of 170MHz to 240MHz (Band III) and 1452MHz to 1492MHz (L-Band).
- The FPC material used in the receiving antenna contributes to strong and stable signal reception.
- Ensure your radio receiver is set to the correct input source for the DAB/DAB+ antenna.
4. Mantentzea
The Zerone DAB DAB+ Radio Receiver Antenna requires minimal maintenance. To ensure continued optimal performance:
- Keep the antenna clean and free from dust or debris. Use a soft, dry cloth for cleaning.
- Avoid exposing the antenna to extreme physical stress or harsh chemicals.
- Periodically check the cable connections to ensure they remain secure.
5. Arazoak
If you experience issues with signal reception, consider the following troubleshooting steps:
- No Signal or Weak Signal:
- Verify that the antenna's MCX connector is securely attached to the radio receiver.
- Check the power connection to ensure the antenna is receiving adequate power (DC5V/DC12V).
- Ensure the antenna is installed in a location with minimal obstructions and good line-of-sight. Try repositioning the antenna if possible.
- Confirm that your radio receiver is correctly configured for DAB/DAB+ reception and is scanning for stations.
- Seinale etengabea:
- Egiaztatu kable konexio solteak.
- Environmental factors such as tall buildings, tunnels, or remote areas can affect signal stability.
6. Zehaztapenak
Detailed technical specifications for the Zerone DAB DAB+ Radio Receiver Antenna:
| Ezaugarri | Zehaztapena |
|---|---|
| Laneko Korrontea | 30mA - 60mA |
| Irteerako inpedantzia | 50/75Ω |
| Konektore mota | MCX Gizonezkoa |
| Dynamic Temperature Range | -20°C eta +60°C artean |
| Static Temperature Range | -40°C eta +85°C artean |
| Lerroaren Luzera | 3 m (118.11 hazbete) |
| Bolumen eragileatage | DC5V / DC12V |
| Operating Frequency (Band III) | 170MHz eta 240MHz artean |
| Operating Frequency (L-Band) | 1452MHz eta 1492MHz artean |
| Output Gain (Band III) | 15 dB ± 3 dB |
| Output Gain (L-Band) | 18 dB ± 3 dB |
| Instalazio-metodoa | Patching (Adhesive) |
| VSWR | ≤ 2dB |
| Elementuaren pisua | 1.76 ontza |
| Marka | Zerone |
| Kolorea | Beltza |
| Kanal kopurua | 390 |
Figure 4: The antenna cable length is approximately 3 meters (118.11 inches). This image visually confirms the cable length specification.
7. Bermea eta Laguntza
Specific warranty information for this product is not provided in the available documentation. For warranty details or technical support, please refer to the retailer or the official Zerone brand store.
You can visit the official Zerone store for additional product information and support: Zerone Store
