Sarrera
This manual provides essential information for the safe and efficient operation of your ProCom ML1PHG Ventless Propane Gas Infrared Space Heater. Please read all instructions carefully before installation and use. This heater is designed to provide supplemental heat for indoor residential spaces.
Figure 1: ProCom ML1PHG Ventless Propane Gas Infrared Space Heater, front view.
Segurtasun Informazioa
Zure segurtasuna eta besteena oso garrantzitsuak dira. Eskuliburu honek segurtasun-mezu garrantzitsuak ditu. Irakurri eta bete beti segurtasun-mezu guztiak.
- This appliance is for use with Propane Gas only.
- Ez biltegiratu edo erabili gasolina edo bestelako lurrun eta likido sukoiak aparatu honen edo beste edozein aparaturen inguruan.
- Installation and repair must be done by a qualified service person. The appliance must be installed in accordance with local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA 54.
- This heater is equipped with an Oxygen Depletion Sensor (ODS) pilot system. The ODS will shut off the heater if oxygen levels in the room become too low. Do not tamper with the ODS.
- Ensure adequate ventilation when operating the heater.
- Keep combustible materials, such as furniture, drapes, and clothing, at least 3 feet (0.9 meters) away from the front of the heater.
Paketearen edukia
Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela.
- Vent Free Heater (Qty. 1)
- Wall Mounting Bracket (Qty. 1)
- Hardware Package (Qty. 1)
Konfigurazioa eta Instalazioa
The ProCom ML1PHG heater can be wall-mounted using the included bracket or placed on a floor with optional base feet (sold separately).
Horman Muntatzea
- Select a suitable wall location, ensuring it is away from combustible materials and has proper clearances.
- Attach the wall mounting bracket securely to the wall using the provided hardware. Ensure the bracket is level and firmly anchored to wall studs or appropriate anchors.
- Carefully lift the heater and align the mounting slots on the back of the heater with the bracket. Lower the heater onto the bracket until it is securely seated.
2. irudia: Adibample of the heater mounted on a wall.
Gas-konexioa
This heater operates on Liquid Propane (LP) gas only. A qualified technician must perform the gas connection.
- Ensure the main gas supply valve is off before making any connections.
- Connect the propane supply line to the heater's gas inlet. Use appropriate gas-rated sealant on all threaded connections.
- Check all connections for leaks using a soap solution. Never use an open flame to check for leaks.
3. irudia: hurbileko planoa view of the Liquid Propane (LP) gas connection point.
Funtzionamendu-argibideak
The ML1PHG heater features a manual control for simple operation.
Pizte-prozedura
- Ensure the gas supply valve to the heater is open.
- Locate the control knob on the top of the heater.
- Push the control knob in and turn it counter-clockwise to the PILOT/IGN posizioa.
- While holding the knob in, repeatedly press the PIZTZAILEA button until the pilot flame ignites. You should see a small blue flame.
- Continue to hold the control knob in for approximately 30-60 seconds after the pilot ignites to allow the thermocouple to heat up.
- Release the control knob. The pilot flame should remain lit. If it extinguishes, repeat steps 3-5.
- Once the pilot is lit, push the control knob in slightly and turn it counter-clockwise to the desired heat setting: BAXUA or ALTU. The main burner will ignite.
Figure 4: Control knob and ignitor button for operation.
Figure 5: The radiant ceramic plaques will glow red during operation.
Berogailua itzaltzea.
- To turn off the main burner, turn the control knob clockwise to the OFF position. The pilot flame will also extinguish.
- For extended periods of non-use, turn off the main gas supply valve to the heater.
Mantentzea
Mantentze-lan erregularrak zure berogailuaren iraupena eta funtzionamendu segurua bermatzen ditu.
- Garbiketa: Keep the heater area clear and free from combustible materials, dust, lint, and pet hair. Use a soft, dry cloth to clean the exterior surfaces. Do not use abrasive cleaners.
- Pilot and Burner Inspection: Periodically inspect the pilot and main burner for proper flame appearance. The pilot flame should be steady and blue. The main burner flame should be blue with no yellow tipping.
- Aireztapena: Ensure that air openings on the heater are not obstructed.
- Urteko ikuskapena: It is recommended to have the heater inspected annually by a qualified service technician.
Arazoak konpontzea
Ikusi beheko taula arazo ohikoenak eta haien irtenbideak ikusteko.
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Pilotuak ez du argituko | No gas supply; Air in gas line; Pilot orifice clogged; Thermocouple faulty; ODS activated. | Ensure gas supply is on; Bleed air from line; Clean pilot orifice; Replace thermocouple; Check ventilation. |
| Pilot lights but main burner will not ignite | Control knob not held long enough; Low gas pressure; Main burner orifice clogged. | Hold knob for 30-60 seconds; Check gas supply pressure; Clean main burner orifice. |
| Heater produces odor | New heater burn-off; Dust accumulation; Inadequate ventilation. | Operate for a few hours in a well-ventilated area; Clean heater; Increase ventilation. |
| Berogailua ezustean itzaltzen da | ODS activation (low oxygen); Pilot flame extinguished; Gas supply interrupted. | Ensure adequate ventilation; Relight pilot; Check gas supply. |
Arazoa konpontzeko urratsek ez badute konpontzen, jarri harremanetan zerbitzu-teknikari kualifikatu batekin.
Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Marka | ProCom |
| Modelo zenbakia | ML1PHG |
| Erregai Mota | Propano Gasa bakarrik |
| Maximum BTU Output | 10,000 BTU |
| Berokuntza Estaldura | Gehienez 500 mXNUMX. Ft. |
| Kontrol mota | Manual (On/Off Settings) |
| Pizte Sistema | Push Button Piezo Ignition |
| Segurtasun Ezaugarriak | Oxygen Depletion Sensor (ODS) with automatic shut-off |
| Beharrezko elektrizitatea | Ez |
| Produktuaren neurriak (H x W x D) | 18.5" A x 24" Z x 8" S |
| Produktuaren pisua | 13 kilo. |
| Muntatze Mota | Wall Mount (hardware included) |
| UPC | 848660004002 |
Figure 6: Product dimensions of the ProCom ML1PHG heater.
Bermearen informazioa
This ProCom ML1PHG Ventless Propane Gas Infrared Space Heater comes with a 1 urteko berme mugatua from the date of purchase. This warranty covers defects in materials and workmanship under normal use and service. For full warranty details and to make a claim, please refer to the documentation included with your product or contact ProCom customer support.
Bezeroarentzako Arreta
For technical assistance, parts, or service inquiries, please contact ProCom customer support. Have your model number (ML1PHG) and purchase date available when contacting support.
Note: Contact information for ProCom is not provided in the product data. Please refer to the manufacturer's official website or product packaging for direct support channels.
