UNICOO Electric Height Adjustable Standing Desk

Sarrera

This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your UNICOO Electric Height Adjustable Standing Desk, Model KT1001. Please read this manual thoroughly before use to ensure safe and efficient operation.

Segurtasun Informazioa

• Mantendu haurren eskura.
• Do not touch the moving parts while the desk is in operation.
• To avoid accidents, ensure the desk is at least 2 degrees from horizontal when loading.
• Overheat protection will activate if the motor runs continuously for more than 2 minutes.
• Always unplug the desk when not in use or during cleaning.

Konfigurazioa eta Muntaketa

The UNICOO Electric Height Adjustable Standing Desk is designed for easy assembly, with most parts pre-assembled. Most users can complete installation in under 30 minutes. All necessary assembly tools are included.

Muntaketa-urratsak gainditzen diraview:

1. Insert the motor bar into the column.
2. Attach the crossbar to the columns using the provided screws (M6*12). Ensure screws are loose initially to facilitate alignment.
3. Insert the drive rod into the column without the motor, ensuring the O-rings are fully inserted into the gearbox.
4. Connect the drive rod to the motor, ensuring the hexagonal rod is properly inserted. Tighten the plastic cap on both sides.
5. Mount the control box to the underside of the desktop using M4*12 screws.
6. Connect the control panel cable to the control box.
7. Secure the power cable and other wires using cable ties (ST4*16), being careful to avoid the transmission rod.

Funtzionamendu-argibideak

The desk features an elegant 7-button programmable controller for easy height adjustment and memory settings.

Altuera doitzea:

• Erabili Gora (^) eta Behera (b) arrow buttons to manually adjust the desk height. The current height is displayed on the LED screen.
• The desk can be adjusted between a minimum height of 30 inches and a maximum height of 48 inches.

Memoria aurrezarpenak:

The controller has four customizable presets (1, 2, 3, 4) to save your preferred sitting and standing heights.

1. Egokitu mahaia nahi duzun altuerara Gora/Behera geziak erabiliz.
2. Sakatu 'S' botoia (Ezarri).
3. Sakatu berehala zenbaki-botoietako bat (1, 2, 3 edo 4) uneko altuera aurrezarpen horretan gordetzeko.
4. To recall a saved height, simply press the corresponding number button. The desk will automatically move to the stored position.

Mantentzea

Mantentze-lan erregularrak zure zutikako mahaiaren iraupena eta errendimendu optimoa bermatzen ditu.

Garbiketa:

• The desktop is made of MDF with a scratch-resistant laminate finish. Wipe the surface with a soft, damp oihal. Saihestu garbitzaile urratzaileak edo produktu kimiko gogorrak.
• For the metal legs, use a mild cleaner and a soft cloth.

Arreta orokorra:

• Always unplug the desk from the power outlet when not in use or before performing any cleaning or maintenance.
• Ensure cables are neatly managed to prevent entanglement with moving parts.

Arazoak konpontzea

If you encounter any issues with your UNICOO standing desk, refer to the following common solutions:

Mahaia berrezartzea:

• If the desk is not responding or displays an error code, press the Behera (b) button to bring the table to its lowest height.
• Then, hold the Behera (b) button for 5 seconds until the display shows 'RST' or a similar reset indicator. The desk will then reset to its lowest position.

Unlocking the Desk:

• If the desk is locked, press the 'S' botoia eta Behera (b) botoia aldi berean 5 segundoz.

Motor Overheat Protection:

• If the motor runs continuously for more than 2 minutes, the overheat protection will activate, and the desk will temporarily stop operating. Allow the motor to cool down for a few minutes before resuming use.

For persistent issues not covered here, please refer to the warranty and support section.

Zehaztapenak

Bermea eta Laguntza

The UNICOO Electric Height Adjustable Standing Desk is covered by a 1-year limited warranty.

For warranty claims, technical support, or any questions regarding your product, please contact UNICOO customer service through the retailer's platform or the official UNICOO website. Please have your model number (KT1001) and purchase information ready when contacting support.