Sarrera
Welcome and thank you for choosing the MOUNTUP Full Motion TV Wall Mount. This manual provides essential information for the safe and correct installation, operation, and maintenance of your TV wall mount. Please read all instructions carefully before beginning installation to ensure proper setup and to prevent damage or injury.
Segurtasun Informazioa
Beti jarraitu segurtasun neurri hauek instalazioan eta erabileran zehar:
- Pisu-gaitasuna: Ez gainditu 40 kg-ko gehienezko pisu-ahalmena. Gehiegi kargatzeak lesio larriak edo ondasunen kalteak eragin ditzake.
- Hormaren egitura: Ziurtatu muntatzeko gainazalak (horma) euskarriaren eta telebistaren pisu konbinatua segurtasunez eutsi dezakeela.
- UL zerrendatua: This product is UL Listed, indicating it meets specific safety standards.
- Lanbide-laguntza: Instalazio prozesuaren edozein atalen inguruan ziur ez bazaude, kontsultatu profesional kualifikatu bati.
- Haurrak: Mantendu haurrak instalazio-eremutik urrun muntaketa-fasean zehar.
- Tresnak: Use appropriate tools and follow all instructions for their safe operation.
Paketearen edukia
Before installation, verify that all components are present and undamaged. If any parts are missing or defective, contact MOUNTUP customer service.
- Hormako plakaren muntaketa
- Telebistarako euskarriak (2 pieza)
- Various TV Screws (M4, M6, M8)
- Spacers and Washers
- Lag Bolts and Concrete Anchors (for specific wall types)
- Burbuila Maila
- Giltza
- Instalazio txantiloia
Zehaztapenak
| Modelo zenbakia | 28XTu2564 |
| Marka | MUNTATZEA |
| Telebistaren tamaina bateragarritasuna | 26 eta 65 hazbete bitartekoa |
| Pisu Edukiera | 88 lb (40 kg) |
| VESA bateragarritasuna | Min: 75x75mm (3"x3"), Max: 400x400mm (16"x16") |
| Horma motaren bateragarritasuna | 16" Wood Studs (Not for alone dry wall application). Concrete/Brick walls require anchors. |
| Inklinazio angelua | +5° / -13° |
| Angelu birakaria | ±45° (Maximum swivel angle depends on TV size) |
| Mailaren Doikuntza | ±3° (Post-installation) |
| Harresiaren Distantzia | 3" eta 15.7" artean |
| Materiala | Altzairu aleazioa |
Konfigurazioa eta Instalazioa
Instalazioaren aurreko egiaztapenak
Before you begin, it is crucial to confirm compatibility and prepare your installation area.
- Egiaztatu telebistaren VESA eredua: Locate the four mounting holes on the back of your TV and measure the horizontal and vertical distance between them. This mount supports VESA patterns from 75x75mm to 400x400mm.
- Check TV Weight and Size: Ensure your TV weighs no more than 88 lbs (40 kg) and is between 26 and 65 inches.
- Egiaztatu horma mota: This mount is designed for installation on 16-inch wood studs. For concrete or brick walls, specific anchors (included) are required. Ez instalatu igeltsuzko paretetan bakarrik.
Figure 1: Compatible Wall Types. The mount is suitable for 16-inch wood studs, concrete walls, and brick walls. Anchors are required for concrete and brick installations.
Figure 2: TV Size and VESA Compatibility. This mount fits TVs from 26 to 65 inches with VESA patterns ranging from 75x75mm to 400x400mm.
Instalazio urratsak
Follow these steps carefully for a secure installation. The main part of the TV mount is pre-assembled for convenience.
3 Irudia: Gainetikview of the 3-Step Easy Installation Process.
1. urratsa: Lotu euskarriak telebistari
- Kontu handiz jarri telebista aurpegia behera gainazal leun eta garbi batean, pantaila kaltetu ez dadin.
- Align the TV brackets with the mounting holes on the back of your TV.
- Hautatu telebistaren muntaketa-zuloetarako egokiak diren torlojuak, arandelak eta tartekatzaileak hardware-kitatik.
- Securely fasten the brackets to the TV using a screwdriver. Do not overtighten.
2. urratsa: Lotu hormako plaka horman
- Determine the desired height and location for your TV.
- Use a stud finder to locate the center of two adjacent wood studs (16-inch spacing). Mark the pilot hole locations.
- For concrete or brick walls, use a drill to create pilot holes at the marked locations and insert the appropriate anchors.
- Position the wall plate against the wall, aligning the holes with your marks. Use the included bubble level to ensure it is perfectly horizontal.
- Secure the wall plate to the wall using the lag bolts (for wood studs) or anchors and bolts (for concrete/brick). Tighten all bolts firmly.
Figure 4: Stud Spacing Compatibility. Ensure your wall studs align with the mount's design for secure installation.
Step 3: Hang and Secure TV to Wall Plate
- Laguntzarekin, altxatu telebista kontu handiz erantsitako euskarriekin eta lotu hormako euskarrian.
- Ziurtatu telebista hormako euskarrian ondo finkatuta dagoela.
- Locate the safety screws or locking mechanisms on the bottom of the TV brackets and tighten them to prevent accidental dislodging.
Funtzionamendu-argibideak
This full motion TV mount allows for flexible adjustment of your TV's position to achieve optimal viewangeluak.
Egokitzea Viewangelua
- okertu: The mount allows for a tilt range of +5° (upward) to -13° (downward). Gently push or pull the top or bottom of your TV to adjust the vertical angle. This helps reduce glare from lights or windows and prevents neck strain.
Figure 5: Tilt Adjustment. Adjust the TV's vertical angle to minimize glare and enhance viewerosotasuna.
- Birakaria: The articulating arm allows the TV to swivel up to ±45° left or right. The maximum swivel angle depends on the size of your TV and its distance from the wall. Gently push the TV to the desired horizontal angle.
Figure 6: Swivel Adjustment. Reposition your TV horizontally for optimal viewgelako toki desberdinetatik ateratzen.
- Luzapena: The mount can extend your TV from 3 inches (retracted) to 15.7 inches (extended) from the wall. Pull the TV gently forward or push it back towards the wall.
- Berdinketa: After installation, you can make minor horizontal adjustments of ±3° to ensure your TV is perfectly level. This adjustment is typically done by loosening specific bolts on the TV brackets, adjusting, and then re-tightening. Refer to the detailed PDF manual for specific instructions.
Figure 7: Post-Installation Leveling. Fine-tune the TV's horizontal alignment after mounting.
Mantentzea
Mantentze-lan erregularrak telebistako horma-euskarriaren iraupena eta funtzionamendu segurua bermatzen laguntzen du.
- Garbiketa: Garbitu euskarria zapi leun eta lehor batekin hautsa kentzeko. Saihestu garbitzaile edo disolbatzaile urratzaileak erabiltzea.
- Aldizkako egiaztapenak: Aldian-aldian egiaztatu torloju eta azkoin guztiak ondo estututa daudela ziurtatzeko. Beharrezkoa bada, berriro estutu.
- Mugimendua: If the mount's movement becomes stiff, a small amount of silicone-based lubricant can be applied to the articulating joints.
Arazoak konpontzea
If you encounter issues during or after installation, consider the following common solutions:
- Telebista mailarik gabe: Use the post-installation leveling feature (±3°) as described in the Operating Instructions. Ensure the wall plate was installed level initially.
- Mendia lasai sentitzen da: Re-check all wall mounting bolts and TV bracket screws for tightness. Ensure the wall type is appropriate and anchors (if used) are correctly installed.
- Difficulty Adjusting: Ensure no cables are snagged or obstructing movement. If joints are stiff, apply a small amount of lubricant.
- Falta diren piezak: Refer to the Package Contents section. If parts are missing, contact MOUNTUP customer service.
Bermea eta Laguntza
MOUNTUP TV wall mount series are backed by a 3 urteko babes plana. Our dedicated customer support team is available to answer any questions you may have regarding installation, operation, or product issues.
For further assistance or detailed diagrams, please refer to the official installation manual: