RigExpert Stick 230 Antenna Analyzer User Manual

1. Sarrera

The RigExpert Stick 230 is a compact, portable antenna analyzer designed for precise measurement of cable and antenna system parameters. It operates within a frequency range of 100 kHz to 230 MHz, making it suitable for various radio communication applications.

1.1 Ezaugarri nagusiak

• Measures SWR (Standing Wave Ratio), return loss, R, X, Z, L, C, Magnitude, and Phase Angle.
• Frequency range: 0.1 to 230 MHz with 1 KHz resolution.
• Supports 25, 50, 75, 100, 150, 200, 300, 450, and 600-Ohm systems.
• Multiple display modes including SWR chart, fixed HAM bands, and Multé mode.
• Equipped with a 200x200 monochrome e-paper display for clear visibility.
• UHF (SO-239) connector for antenna connection.
• Powered by a 3.7V Li-Ion 18650 battery or via USB.

1.2 Aurreikusitako erabilera

This analyzer facilitates:

• Rapid assessment of antenna performance in various environments.
• Precise tuning of antennas to their resonant frequency.
• Comparative analysis of antenna characteristics over time.
• Measurement of capacitance or inductance for reactive loads.

2. Segurtasun informazioa

Jarraitu segurtasun neurri hauek gailuari kalteak edo lesio pertsonalak saihesteko:

• Do not expose the device to extreme temperatures, moisture, or direct sunlight for prolonged periods.
• Use only the specified battery type (3.7V Li-Ion 18650) and charging methods.
• Saihestu gailua desmuntatzea. Konponketa-lanak langile kualifikatuei eskatu.
• Ensure proper connection of antennas and cables to prevent damage to the analyzer's RF port.

3. Paketearen edukia

Egiaztatu elementu guztiak paketean daudela:

• RigExpert Stick 230 Antenna Analyzer
• USB kablea
• Eskumuturreko uhala
• Hasierako gida azkarra

Image 3.1: The RigExpert Stick 230 Antenna Analyzer package contents, including the analyzer unit, USB cable, wrist strap, and quick start guide.

4. Gailua amaitu daview

Familiarize yourself with the components of the RigExpert Stick 230.

4.1. irudia: Aurrealdea view of the RigExpert Stick 230, highlighting the e-paper display and the 2x3 control keypad.

4.1 Bistaratzea

The device features a 200x200 monochrome e-paper display, providing clear readings even in bright conditions.

4.2 Kontrol botoiak

The 2x3 keypad includes navigation buttons (up, down, left, right), an Enter button, and a Power button for device operation.

4.3 Konektoreak

• RF konektorea: UHF (SO-239) type, located at the top of the device, for connecting antennas or test loads.
• USB ataka: Located at the bottom, used for charging the internal battery and connecting to a personal computer for data transfer or firmware updates.

5. Konfigurazioa

5.1 Bateria kargatzea

1. Connect the supplied USB cable to the analyzer's USB port.
2. Konektatu USB kablearen beste muturra ordenagailuko USB ataka batera edo USB hormako egokitzaile batera.
3. The device will indicate charging status on the display. A full charge typically takes several hours.

The analyzer can also draw power directly from the USB source when connected.

5.2 Hasierako piztea

1. Press and hold the Power button until the display activates.
2. The device will boot up and display the main menu or the last used measurement screen.

6. Funtzionamendu-argibideak

6.1 Basic Antenna Measurement

1. Ensure the analyzer is adequately charged or connected to a power source.
2. Connect the antenna to be tested to the UHF (SO-239) connector on the analyzer. Ensure the connection is secure.
3. Piztu gailua.
4. Navigate through the menu using the control buttons to select the desired measurement mode (e.g., SWR, Single Frequency).
5. Enter the desired frequency using the navigation buttons. The frequency can be adjusted with 1 KHz resolution.
6. The display will show the measured parameters, such as SWR, return loss, R, and X.

6.2 Bistaratzeko moduak

The RigExpert Stick 230 offers several display modes:

• Single Frequency: Displays SWR, return loss, R, X, Z, L, C, Magnitude, and Phase Angle at a specific frequency.
• SWR grafikoa: Plots SWR over a frequency range with 100 data points.
• HAM Bands Chart: Provides SWR charts specifically for IARU Region HAM bands.
• Multé Mode: Designed for quick checks of multiband antennas.

6.3 System Impedance Selection

The analyzer supports measurements for various system impedances. Access the settings menu to select the appropriate impedance (25, 50, 75, 100, 150, 200, 300, 450, or 600 Ohms) for your application.

6.4 PC konexioa

Connect the analyzer to a personal computer via the USB port to:

• Transfer measurement data.
• Eguneratu gailuaren firmwarea.
• Utilize companion software (if available from RigExpert) for advanced analysis.

7. Mantentzea

7.1 Garbiketa

Wipe the device with a soft, dry cloth. Do not use liquid cleaners or solvents, as they may damage the display or casing.

7.2 Biltegiratzea

Store the analyzer in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, ensure the battery is partially charged (around 50%) to prolong its lifespan.

7.3 Bateria zaintzea

The internal Li-Ion battery is designed for long life. To maximize battery health:

• Saihestu bateria maiz erabat deskargatzea.
• Charge the battery regularly, even if the device is not in frequent use.
• Do not expose the device to temperatures above 60°C (140°F) or below -20°C (-4°F).

8. Arazoak

8.1 Gailua ez da pizten

• Ensure the battery is charged. Connect the device to a USB power source and attempt to power it on.
• Verify that the Power button is pressed and held sufficiently.

8.2 Incorrect Measurement Readings

• Check all cable connections to ensure they are secure and free from damage.
• Verify that the correct system impedance is selected in the device settings.
• Ensure the antenna or load being tested is properly connected and functioning.

8.3 Bistaratzeko arazoak

• If the display is unresponsive or shows artifacts, try restarting the device.
• Ensure the device is not exposed to extreme cold, which can temporarily affect e-paper display performance.

9. Zehaztapenak

10. Bermea eta Laguntza

For warranty information and technical support, please refer to the official RigExpert webwebgunera edo jarri harremanetan zure baimendutako saltzailearekin. Gorde erosketaren frogagiria bermearen erreklamazioetarako.