Grizzl-E Classic Level 2 EV Charger User Manual

1. Sarrera

The Grizzl-E Classic is a robust and reliable Level 2 Electric Vehicle (EV) charging station designed for both indoor and outdoor use. This manual provides essential information for the safe and efficient operation of your Grizzl-E charger.

Ezaugarri nagusiak

• Bateragarritasun Unibertsala: Compatible with all Electric Vehicles (EVs) and Plug-in Hybrid Electric Vehicles (PHEVs) sold in North America.
• Karga azkarra: Egokigarria amperage settings (40A, 32A, 24A, 16A) for optimal charge rates, delivering up to 28-30 miles per hour at 40A.
• Eraikuntza iraunkorra: Features a UL Certified, metal case enclosure with IP67 water resistance and fire resistance for extreme weather conditions.
• Segurtasun aurreratua: Equipped with Over Current, Over Voltage, Under Voltage, Missing Diode, Ground Fault, and Over Temperature Protections. Includes Self-Monitoring and Recovery, Power Outage Recovery, and a Built-in GFCI.
• Instalazio erraza: Designed for simple plug-in installation with a NEMA 14-50 plug, saving on complex wiring costs.

Figure 1.1: Grizzl-E Classic EV Charger with NEMA 14-50 plug and charging cable.

Figure 1.2: High-speed charging capabilities and indoor/outdoor suitability.

Figure 1.3: Compatibility with a wide range of electric vehicles.

2. Konfigurazioa eta instalazioa

The Grizzl-E Classic charger is designed for straightforward installation. It can be plugged into an existing NEMA 14-50 outlet or hardwired by a qualified electrician.

Paketearen edukia

Instalazioa hasi aurretik, ziurtatu osagai guztiak daudela:

• Grizzl-E Classic EV Charger Unit
• Mounting Bracket + screws
• Easy EV Plug, J1772 type + screws
• Pin
• Backplate Cradle + screws

Figure 2.1: Components included in the Grizzl-E Classic package.

Installation Steps (NEMA 14-50 Plug-in)

1. Aukeratu kokapena: Select a suitable location near your parking spot with access to a NEMA 14-50 outlet. The unit is rated for indoor/outdoor use.
2. Muntaketa: Securely attach the mounting bracket to a wall stud or appropriate anchor points using the provided screws.
3. Kargagailua konektatu: Slide the Grizzl-E charger unit onto the mounted bracket.
4. Konektatu: Insert the NEMA 14-50 plug into the dedicated 240V NEMA 14-50 receptacle.
5. Kable segurua: Use the provided J1772 plug holder and backplate cradle to neatly store the charging cable and connector when not in use.

For hardwired installations, it is highly recommended to consult a certified electrician to ensure compliance with local electrical codes and safety standards.

3. Funtzionamendu-argibideak

Operating the Grizzl-E Classic charger is simple and intuitive.

Zure EV kargatzen

1. Connect to EV: Open your vehicle's charging port cover. Take the J1772 connector from the Grizzl-E charger and firmly insert it into your vehicle's charging port until you hear a click, indicating a secure connection.
2. Kargatzea hasi: The charger will automatically begin the charging process. The LED indicator on the Grizzl-E unit will illuminate to show charging status.
3. Monitor kargatzen: You can monitor the charging progress through your vehicle's dashboard or companion app, if available.
4. Kargatzea amaitu: To stop charging, first unlock your vehicle (if applicable), then press the release button on the J1772 connector and pull it out from your vehicle's charging port.
5. Dendako kablea: Return the J1772 connector to its holder on the Grizzl-E unit to keep it protected and organized.

Egokitzea Amparoa

The Grizzl-E Classic allows for adjustable maximum current output to match your circuit breaker capacity. The available settings are 40A, 32A, 24A, and 16A. Refer to the internal dip switches for adjustment, typically found by opening the unit's enclosure (consult a qualified electrician if unsure).

• 40 Amps: For 50A circuit breaker.
• 32 Amps: For 40A circuit breaker.
• 24 Amps: For 30A circuit breaker.
• 16 Amps: For 20A circuit breaker.

4. Mantentzea

The Grizzl-E Classic charger is built for durability and requires minimal maintenance.

• Ohiko garbiketa: Periodically wipe down the exterior of the charger and cable with a soft, damp hautsa eta zikinkeria kentzeko zapia. Saihestu produktu kimiko gogorrak edo garbitzaile urratzaileak erabiltzea.
• Inspect Cable and Connector: Regularly check the charging cable and J1772 connector for any signs of wear, damage, or fraying. Ensure the pins on the connector are clean and free of debris.
• Ingurumena babestea: The unit is IP67 rated for water resistance, meaning it is protected against immersion in water up to 1 meter for 30 minutes. It is also fire resistant. However, avoid prolonged exposure to extreme conditions if possible to extend product life.
• Konexioaren egiaztapena: Ensure the NEMA 14-50 plug (if applicable) remains securely seated in the outlet.

5. Arazoak

The Grizzl-E Classic charger is equipped with self-monitoring and recovery features to handle common issues. If you encounter a problem, try the following steps:

• Ez dago energiarik/ez kargatzen:
  • Check if the NEMA 14-50 plug is fully inserted into the outlet.
  • Egiaztatu entxufearen etengailua ez dela jauzi egin. Beharrezkoa bada, berrezarri.
  • Ensure the J1772 connector is securely plugged into your vehicle's charging port.
  • Check your vehicle's charging settings to ensure it is ready to accept a charge.
• Tarteka kargatzea:
  • Inspect the charging cable and connector for any visible damage or loose connections.
  • Ensure the charger is not exposed to extreme temperatures that might trigger its over-temperature protection.
• Errore-adierazleak: The Grizzl-E charger has built-in protections for Over Current, Over Voltage, Under Voltage, Missing Diode, Ground Fault, and Over Temperature. If an issue is detected, the unit is designed for Self-Monitoring and Recovery. Allow the unit to reset itself.
• Potentzia Outage Berreskuratzea: Potentzia bat izanez gerotage, the charger is designed to automatically resume charging once power is restored.

If problems persist after attempting these steps, please contact Grizzl-E customer support for further assistance.

6. Zehaztapenak

7. Bermea eta Laguntza

Grizzl-E chargers are known for their durability and reliable performance, backed by comprehensive support.

Bermearen informazioa

The Grizzl-E Classic charger typically comes with a 3 urteko bermea, ensuring peace of mind regarding its quality and performance. Please refer to your product's specific warranty card or the manufacturer's official webtermino eta baldintza zehatzetarako webgunea.

Figure 7.1: Warranty and safety features of the Grizzl-E charger.

Bezeroarentzako Arreta

For any technical assistance, troubleshooting, or warranty claims, please contact United Chargers Inc., the manufacturer of Grizzl-E products. They are committed to providing excellent customer support.

• Fabrikatzailea: United Chargers Inc.
• Harremanetarako informazioa: Refer to the official Grizzl-E website or your product packaging for the most current contact details, including phone numbers and email support.