Einhell TE-CC 250 UF Table Saw Instruction Manual

1. Sarrera

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your Einhell TE-CC 250 UF Table Saw. Please read these instructions carefully before using the machine for the first time. Keep this manual in a safe place for future reference.

The Einhell TE-CC 250 UF table saw is designed for precise cutting and trimming of various workpieces. It features a durable aluminum table, a precision tungsten carbide saw blade, and a powerful 2000 W motor with soft start functionality. Its design includes features for enhanced safety, precision, and mobility.

2. Segurtasun Jarraibide Orokorrak

OHARRA: Irakurri tresna elektriko honekin emandako segurtasun-abisu, argibide, ilustrazio eta zehaztapen guztiak. Behean zerrendatzen diren argibide guztiak ez betetzeak deskarga elektrikoa, sutea eta/edo lesio larriak eragin ditzake.

• Lan eremuko segurtasuna: Mantendu lan-eremua garbi eta ondo argiztatuta. Gune nahasi edo ilunak istripuak sor ditzakete. Ez erabili tresna elektrikoak leherketa-atmosferan, hala nola likido, gas edo hauts sukoien aurrean.
• Segurtasun elektrikoa: Tresna elektrikoen entxufeak entxufearekin bat etorri behar dira. Ez aldatu inoiz entxufea inola ere. Saihestu gorputza lurrera konektatutako gainazalekin kontaktuan jartzea.
• Segurtasun pertsonala: Always wear eye protection, hearing protection, and a dust mask when operating the saw. Do not overreach. Keep proper footing and balance at all times. Dress properly; avoid loose clothing or jewelry.
• Erremintaren erabilera eta zaintza: Ez behartu tresna elektrikoa. Erabili zure aplikaziorako tresna elektriko egokia. Deskonektatu entxufea energia-iturritik eta/edo kendu bateria-paketea, desmuntagarria bada, tresna elektrikotik doikuntzak egin, osagarriak aldatu edo tresna elektrikoak gorde aurretik.
• Specific Table Saw Safety: Always use the push stick when cutting small pieces. Ensure the saw blade guard is in place and functioning correctly. Never remove cut-off material while the blade is rotating.

3. Produktuaren osagaiak eta ezaugarriak

Familiarize yourself with the key components and features of your Einhell TE-CC 250 UF Table Saw.

Ezaugarri nagusiak:

• Precision Tungsten Carbide Saw Blade: Ensures clean and accurate cuts.
• Aluminum Table: Flat and durable with excellent sliding properties for precise workpiece guidance.
• Taularen luzapenak: Extendable to the rear and right side for processing wider workpieces.
• Sliding Carriage: Facilitates long and precise cuts.
• 2-in-1 Saw Blade Adjustment: Allows quick adjustment of saw blade height and inclination.
• Geldialdi paraleloa: Equipped with double-sided fastening for stable and precise parallel cuts.
• Cross Stop: Features an angle scale for accurate miter cuts.
• Transparent Saw Blade Guard: Improves visibility of the cutting process while maintaining safety.
• Chip Extraction Connection: For connecting a dust extractor to keep the workplace clean.
• Foldable Stand with Wheels (Trolley Function): Provides mobility and easy transport.
• Osagarrien euskarria: For organized storage of tools.
• Overload Switch: Protects the motor from damage due to overvoltage.
• Integrated Soft Start: Protects the motor and electrical fuses during startup.

4. Konfiguratzeko argibideak

Before operating the table saw, ensure it is properly assembled and secured.

1. Despaketatzea: Kontu handiz atera osagai guztiak paketetik. Egiaztatu garraioan zehar kalterik egon den.
2. Standaren muntaia: Assemble the foldable stand according to the diagrams in the separate assembly guide. Ensure all locking mechanisms are securely engaged.
3. Mounting the Saw Unit: Securely attach the saw unit to the assembled stand. Verify all bolts and fasteners are tightened.
4. Taularen luzapenak: Install the table extensions. The main aluminum table can be extended rearwards by 65 mm and to the right by 150 mm. Ensure they slide smoothly and lock into position.
5. Parallel Stop Installation: Attach the parallel stop. It features double-sided fastening for stability. Calibrate the scale for accurate measurements.
6. Cross Stop Installation: Install the cross stop. This stop includes an angle scale for miter cuts.
7. Saw Blade Guard: Ensure the transparent saw blade guard is correctly installed and moves freely.
8. Berdinketa: Use the adjustable feet on the stand to ensure the table saw is stable and level on your work surface.
9. Hautsa erauztea: Connect a suitable dust extraction system to the chip extraction port for a cleaner and safer working environment.

5. Funtzionamendu-argibideak

Follow these steps for safe and effective operation of your table saw.

1. Potentzia-konexioa: Connect the saw to a suitable 230 Volt power supply. The integrated soft start feature will manage the initial power surge.
2. Palaren altueraren doikuntza: Use the 2-in-1 adjustment mechanism to set the saw blade height. The blade should extend slightly above the workpiece for optimal cutting.
3. Blade Angle Adjustment: Adjust the saw blade inclination for miter cuts using the same 2-in-1 adjustment. The cross stop has an angle scale to guide you.
4. Setting Stops: Position the parallel stop for rip cuts or the cross stop for cross-cuts and miter cuts. Ensure they are securely fastened and aligned with your desired measurement.
5. Workpiece Placement: Place the workpiece firmly against the fence and the table. Ensure it is stable and will not shift during the cut.
6. Using the Push Stick: Always use the provided push stick when cutting narrow or short workpieces to keep your hands safely away from the blade.
7. Zerra martxan jartzea: Press the green 'ON' button (Figure 6) to start the saw. Allow the blade to reach full speed before beginning the cut.
8. Ebaketa egitea: Feed the workpiece slowly and steadily into the blade. Maintain firm pressure against the fence and the table.
9. Zerra gelditzea: After completing the cut, press the red 'OFF' button (Figure 6). Wait for the blade to come to a complete stop before removing the workpiece or any cut-off material.
10. Gainkarga babesa: If the motor experiences an overload, the overload switch will activate to protect the motor. If this occurs, turn off the saw, allow it to cool, and reduce the load before restarting.

6. Mantentzea

Mantentze-lan erregularrak zure mahai-zerraren iraupena eta funtzionamendu segurua bermatzen ditu.

• Garbiketa: After each use, disconnect the power and clean the saw. Remove sawdust and debris from the table, blade guard, and motor housing. Use a brush or compressed air.
• Palan ikuskatzea: Regularly inspect the saw blade for sharpness, damage, or missing teeth. Replace dull or damaged blades immediately.
• Lubrifikazioa: Periodically lubricate moving parts as indicated in the detailed product manual (not provided here).
• Loturaren egiaztapena: Check all bolts, nuts, and screws regularly to ensure they are tight. Tighten any loose fasteners.
• Dust Extraction System: Ensure the dust extraction port and connected system are clear of blockages.
• Biltegiratzea: When not in use, store the table saw in a dry, secure location. The foldable stand and trolley function (Figure 3) make it easier to move and store.

7. Arazoak

Atal honek aurki ditzakezun arazo ohikoenei heltzen die.

8. Zehaztapen Teknikoak

9. Bermearen informazioa

Einhell products are designed for quality and durability. This product comes with a standard warranty. Additionally, Einhell offers extended warranty services for certain products, such as a 3-year warranty on Power X-Change batteries upon online registration.

To activate any extended warranty services, products must be registered on the official Einhell website within 30 days of purchase. Please refer to the official Einhell website or your purchase documentation for specific warranty terms and conditions applicable to your product.

10. Bezeroarentzako arreta

For further assistance, spare parts, or service inquiries, please contact Einhell customer support or visit their official webgunea.

Informazio gehiago eta harremanetarako datuak aurki ditzakezu webgunea bisitatuz Einhell Brand Store.