myTouchSmart 48707 Rotatable Outdoor Digital Yard Stake Timer Instruction Manual

Sarrera

This manual provides detailed instructions for the safe and efficient operation of your myTouchSmart 48707 Rotatable Outdoor Digital Yard Stake Timer. Please read this manual thoroughly before installation and use, and retain it for future reference. This device is designed to automate outdoor lighting and other electrical appliances with programmable on/off times, light-sensing technology, and multiple grounded outlets.

Segurtasun informazio garrantzitsua

• Deskarga elektrikoaren arriskua: Use only with a GFCI-protected outdoor outlet. Do not immerse in water.
• Lurreratze egokia: Ensure the timer is properly grounded.
• Gainkarga babesa: Do not exceed the maximum electrical rating of 125V, 60 Hz, 1875W (15A) general/resistive.
• Lekua: Place the stake in a location with direct access to sunlight for optimal light sensor function. Ensure the unit is at least 1 foot above ground level to prevent waterlogging.
• Outlet estalkiak: Keep individual self-closing protective outlet covers closed when not in use to prevent moisture and debris entry.
• Kablearen kudeaketa: Route cords to prevent tripping hazards and damage.
• Mantentzea: Deskonektatu korrontea mantentze-lan edo garbiketa egin aurretik.

Paketearen edukia

• myTouchSmart Rotatable Outdoor Digital Yard Stake Timer (Model 48707)
• Ground Stake (multi-section)
• Argibide eskuliburua

Produktuaren Ezaugarriak

• Rotatable Outlets: Six grounded outlets, three of which rotate 180 degrees for flexible access.
• Tenporizadore digitala: Programmable with custom ON/OFF times.
• Argi-sentsorea: Automatic dusk-to-dawn operation or 6-hour countdown after sunset.
• Eguraldiarekiko erresistentea: Durable construction with self-closing protective outlet covers.
• 10ft Cord: Provides extended reach for outdoor placement.
• Gainkarga babesa: Integrated 15A/1875W circuit breaker for safety.

Konfigurazioa

1. Estalkia muntatu: Attach the stake sections together and then to the timer unit.
2. Lekua: Insert the assembled stake firmly into the ground in your desired outdoor location. Ensure the timer unit is at least 1 foot above ground level and has direct access to sunlight if using light-sensing features.
3. Initial Power Connection: Plug the timer's power cord into a GFCI-protected outdoor outlet. If the display is blank, allow the timer to charge for at least 30 minutes to power the internal battery.
4. Berrezarri tenporizadorea: Using a small, non-metallic, insulated tool (like a pencil tip or toothpick), press the Berrezarri button located on the control panel. The LCD display will illuminate and show "12:00 AM".
5. Konektatu gailuak: Plug your outdoor lights or appliances into the grounded outlets. Rotate the outlets as needed for optimal cord management. Close the protective covers over unused outlets.

Funtzionamendu-argibideak

1. Setting Day & Time

1. Eduki sakatuta ERLOIA botoia.
2. Eusten bitartean ERLOIA, sakatu ASTEA button repeatedly until the desired day of the week appears at the top of the display.
3. Jarraitu eusten ERLOIA, eta sakatu ORDUA button repeatedly to set the current hour (AM/PM will adjust automatically).
4. Still holding ERLOIA, sakatu MIN botoia behin eta berriz uneko minutua ezartzeko.
5. Askatu ERLOIA Ezarpenak gordetzeko botoia.

2. Setting Programs (ON/OFF Times)

The timer allows for two custom ON/OFF programs. Follow these steps for each program:

1. Sakatu PROG button once. The display will show "1 ON" at the bottom left. This indicates you are setting the ON time for Program 1.
2. Sakatu ASTEA button repeatedly to select the desired day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU, or various combinations).
3. Sakatu ORDUA botoia nahi duzun pizteko ordua ezartzeko.
4. Sakatu MIN botoia nahi duzun pizteko minutua ezartzeko.
5. Sakatu PROG button again. The display will show "1 OFF". This indicates you are setting the OFF time for Program 1.
6. Errepikatu 2-4 urratsak 1. Programarako nahi dituzun itzaltze eguna(k), ordua eta minutua ezartzeko.
7. To set Program 2, press the PROG button again until "2 ON" appears, then repeat steps 2-6.
8. Nahi dituzun programa guztiak konfiguratu ondoren, sakatu botoia ERLOIA botoia pantaila nagusira itzultzeko.

To clear a program: Bitartean viewing the program (e.g., "1 ON" or "1 OFF"), press the R (Reset) button. Four dashes will appear, indicating the program is cleared. Press R again to reactivate it.

3. Auto/Manual Settings

To use your programmed settings, the timer must be in AUTO mode. To switch between modes:

• Eduki sakatuta ESKULIBURUA button for 4 seconds. The display will cycle through AUTO ON, AUTO OFF, and MANUAL.
• AUTO ON: The timer will remain ON until the next programmed OFF time.
• OFF AUTO: The timer will remain OFF until the next programmed ON time.
• ESKULIBURUA: The timer will ignore all programmed settings and act as a simple ON/OFF switch.

4. Light Sensor Modes (Dusk-to-Dawn, Countdown)

The timer features light-sensing technology for automatic operation based on ambient light. Ensure the light sensor (located on the top of the unit) is unobstructed and receives direct sunlight for optimal performance.

• Iluntzetik iluntzera: The timer will automatically turn ON at dusk and remain ON until dawn.
• Atzerako kontaketa tenporizadorea: The timer will turn ON at dusk and remain ON for a preset duration (e.g., 6 hours).

Refer to the specific button on your timer labeled "Sensor" or "Timer" to cycle through these modes. The product description mentions "6-Hour Countdown" and "dawn to dusk" as presets.

5. Security/Vacation Mode (Random Function)

This mode randomly adjusts your programmed ON/OFF times to give your home a lived-in appearance, deterring potential intruders. To activate this feature, you must have at least one program set for longer than 33 minutes.

1. Sakatu ASTEA eta ORDUA buttons simultaneously. "RND" will appear to the right of the display, indicating Random mode is active.
2. In this mode, programmed ON/OFF times will be randomly postponed by 2 to 32 minutes.
3. Desaktibatzeko, sakatu tekla ASTEA eta ORDUA buttons simultaneously again. "RND" will disappear.

6. Udako ordutegia

To adjust the time for Daylight Saving:

1. Sakatu ORDUA eta MIN buttons simultaneously. The time will adjust by one hour forward or backward.
2. This function must be manually enabled or disabled as needed.

Mantentzea

• Regularly inspect the timer and cord for any signs of damage, fraying, or wear.
• Keep the light sensor clean and free from debris to ensure accurate dusk/dawn detection.
• Ensure all unused outlets have their protective covers securely closed.
• Garbitu unitatea leun batekin, damp oihal. Ez erabili produktu kimiko gogorrak edo garbitzaile urratzaileak.

Arazoak konpontzea

Zehaztapenak

Bermea eta Laguntza

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the myTouchSmart official webgunea. Gorde erosketa-agiria erosketaren frogagiri gisa.