Sarrera
This manual provides essential information for the safe and effective use of your Luceco LED Inspection Head Torch. Please read these instructions carefully before operating the device and retain them for future reference. This head torch is designed for various applications, including professional inspection, DIY tasks, camping, and other outdoor activities, offering versatile lighting modes and hands-free operation.
1. irudia: Aurrealdea view of the Luceco LED Inspection Head Torch.
Produktua amaituview
The Luceco LED Inspection Head Torch is a versatile and durable lighting solution. Key features include:
- 5 argiztapen moduak: Includes 100% output, 50% output, flash mode, red light, and red flash mode.
- PIR mugimendu sentsorea: For hands-free operation, allowing activation and deactivation with a wave of the hand.
- Inklinazio erregulagarria: The torch head can be tilted up to 60 degrees to direct light precisely where needed.
- Bateria kargagarria: Integrated lithium polymer battery, conveniently charged via USB Type-C.
- Eraikuntza iraunkorra: Lightweight ABS body with an IK04 rating, designed to withstand tough environments.
- Buruko banda erregulagarria: Elastic headband ensures a comfortable and secure fit for various head sizes.
Konfigurazioa
1. Hasierako kargatzea
Before first use, fully charge the head torch. Connect the provided USB Type-C cable to the charging port on the head torch and plug the other end into a compatible USB power source (e.g., computer, USB wall adapter). The charging indicator light will show the charging status. A full charge typically takes approximately 2.5 hours.
Figure 2: USB Type-C charging port for convenient recharging.
2. Buruko zinta doitzea
Place the head torch on your head. Adjust the elastic headband by sliding the buckles on either side until it fits snugly and comfortably. Ensure the torch unit is centered on your forehead.
Figure 3: The adjustable headband ensures a comfortable and secure fit.
Funtzionamendu-argibideak
1. Piztea/itzaltzea eta moduaren hautaketa
Locate the power button on the top of the head torch. Press the button to cycle through the following lighting modes:
- Lehen prentsa: 100% Light Output (150lm)
- Bigarren prentsa: 50% Light Output
- Hirugarren prentsa: Flash modua
- Laugarren prentsa: Argi Gorria
- Bosgarren Prentsa: Flash gorria modua
- Sixth Press: Desaktibatuta
To turn off the torch from any mode, press and hold the power button for approximately 2 seconds.
Figure 4: The head torch offers five versatile lighting modes.
2. PIR Motion Sensing Function
The head torch features a PIR motion sensor for hands-free control. To activate this function, press the dedicated motion sensor button (usually located near the power button). Once activated, you can turn the light on or off by waving your hand in front of the sensor.
3. Tilting the Torch Head
The torch head can be manually tilted up or down to adjust the beam angle. Gently push the torch unit to achieve the desired angle, up to 60 degrees. This allows you to focus light on specific areas without repositioning the entire head torch.
Figure 5: The torch head can be tilted for precise light direction.
Mantentzea
1. Garbiketa
To clean the head torch, wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or internal components. Ensure the charging port cover is securely closed before cleaning to prevent water ingress.
2. Bateria zaintzea
The integrated lithium polymer battery is designed for long life. To maximize battery longevity:
- Recharge the battery when the light output becomes noticeably dim.
- Saihestu bateria maiz erabat deskargatzea.
- If storing the head torch for an extended period, charge it to approximately 50% every 3-6 months.
3. Biltegiratzea
Store the head torch in a cool, dry place away from direct sunlight and extreme temperatures. Keep it away from corrosive materials and out of reach of children.
Arazoak konpontzea
If you encounter issues with your Luceco LED Inspection Head Torch, refer to the following common problems and solutions:
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Linterna ez da pizten. | Bateria agortuta dago. | Charge the head torch fully using the provided USB cable. |
| Argia ahula da edo keinuka ari da. | Bateria maila baxua. | Kargatu bateria. |
| Torch does not charge. | Faulty USB cable or power source; charging port obstruction. | Try a different USB cable or power source. Check the charging port for debris and clean if necessary. |
| Mugimendu sentsoreak ez du erantzuten. | Sensor not activated; obstruction in front of sensor. | Ensure the motion sensor function is activated (press the dedicated button). Clear any obstructions from the sensor area. |
If the problem persists after attempting these solutions, please contact Luceco customer support.
Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Modelo zenbakia | LILH15P65-01 |
| Argi iturri mota | LED |
| Wattage | 3 Watt |
| Argi Fluxua | 150 lumen |
| Kolore Tenperatura | 6500K (Zuri Hotza) |
| Beam Distantzia | 150m arte |
| Bateria mota | Litio polimeroa (barne) |
| Kargatzeko Denbora | Gutxi gorabehera. 2.5 ordu |
| Bateriaren iraupena (gehienez) | Up to 20 hours (depending on use) |
| LED Bizitza | 25,000 ordu |
| Materiala | ABS (body), Aluminum (internal components) |
| Kolorea | Black / Green |
| Produktuaren neurriak | 2.7 x 10.6 x 13.1 cm |
| Elementuaren pisua | 80 g |
| Ingress Protection (IK Rating) | IK04 |
Bermea eta laguntza
The Luceco LED Inspection Head Torch comes with a 1 urteko fabrikatzailearen bermea erosketa-datatik aurrera. Berme honek ohiko erabileran materialen eta eskulanen akatsak estaltzen ditu.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact the dedicated Luceco technical support team. Please have your product model number (LILH15P65-01) and proof of purchase ready when contacting support.
