1. Sarrera
Thank you for choosing the MOUNTUP Single Computer Monitor Stand. This full motion gas spring desk monitor arm is designed to enhance your workspace ergonomics by providing flexible positioning for your monitor. It is compatible with most flat and curved computer monitors from 17 to 32 inches, supporting a maximum weight of 17.6 lbs. This manual will guide you through the installation, operation, and maintenance of your new monitor mount.
2. Segurtasun informazioa
Please read and understand all instructions before installation and use. Failure to do so may result in personal injury or property damage. If you have any questions, please contact MOUNTUP customer support.
- Ez gainditu 17.6 lb-ko (8 kg) gehienezko pisu-gaitasuna.
- Ensure the desk surface is stable and strong enough to support the combined weight of the mount and monitor.
- Always keep the arm in a horizontal position during gas spring tension adjustment to prevent injury or damage.
- Use all provided hardware and follow the installation steps precisely.
- Mantendu haurrak eta maskotak urrun instalatzean.
3. Enbalatzeko Zerrenda
Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela eta kalterik gabe daudela.
Figure 3.1: Key features and compatibility of the MOUNTUP monitor mount.
Paketeak honako hauek izan behar ditu:
- Monitor Arm Assembly (Upper and Lower Arms)
- Desk Pole
- C-Clamp Oinarria
- Grommet oinarriaren osagaiak
- VESA Plaka
- All necessary screws, washers, and Allen keys
- Argibide eskuliburua
4. Konfigurazioa eta instalazioa
Choose between C-Clamp or Grommet mounting based on your desk type and preference.
Figure 4.1: The monitor mount offers both C-Clamp and Grommet mounting options.
4.1 C-Clamp Instalazioa
- Erantsi C-clamp base to the desk pole using the provided screws and Allen key.
- Position the assembled clamp and pole on the edge of your desk.
- Estutu C-clamp Torlojua euskarria mahaira ondo finkatu arte. Ziurtatu egonkorra dela eta ez dela mugitzen.
4.2 Grommet Installation
- Desmuntatu C-cl-aamp by removing the screw and plate.
- Insert the desk pole through the grommet hole in your desk.
- Secure the pole from underneath the desk using the grommet base plate and tightening knob.
4.3 Attaching VESA Plate to Monitor
- Jarri kontu handiz monitorearen aurpegia behera gainazal leun eta garbi batean.
- Lerrokatu VESA plaka monitorearen atzealdeko muntaketa-zuloekin (75x75 mm edo 100x100 mm).
- Secure the VESA plate to the monitor using the appropriate screws. Do not overtighten.
4.4 Attaching Monitor to Arm
- Slide the VESA plate with the attached monitor onto the monitor arm's mounting head.
- Ensure the monitor is fully seated and then tighten the security bolt to prevent accidental detachment.
4.5 Kableen kudeaketa
Route your monitor cables through the integrated cable management clips on the arm and pole to maintain a tidy workspace.
Figure 4.2: Effective cable management keeps your desk organized.
4.6 Instalazio bideo gida
Video 4.1: A detailed installation guide for the MOUNTUP Single Monitor Mount (MU0025).
5. Funtzionamendua eta doikuntzak
MOUNTUP monitore besoak mugimendu osoko gaitasunak eskaintzen ditu modu optimoan viewerosotasuna.
Figure 5.1: The monitor arm provides extensive adjustability for ergonomic positioning.
5.1 Gas malgukiaren tentsioaren doikuntza
Adjust the gas spring tension to match your monitor's weight for smooth and stable positioning. Keep the arm in a horizontal position during adjustment.
Figure 5.2: Adjusting the gas spring tension for optimal monitor support.
- If the arm shoots up: Turn the adjustment screw clockwise ("-" direction) to reduce tension for a lighter monitor.
- If the arm falls down: Turn the adjustment screw counter-clockwise ("+" direction) to increase tension for a heavier monitor.
5.2 Inklinazioa doitzea
The monitor can tilt +90° (up) and -45° (down) to reduce glare and optimize viewangeluak.
- Loosen the tilting bolt on the VESA plate.
- Position the screen to your desired angle.
- Retighten the tilting bolt to fix the angle.
5.3 Swivel and Rotation
The arm allows for extensive swivel and 360° rotation for landscape or portrait orientation.
Figure 5.3: Achieve perfect viewing angles with 360-degree rotation.
- Lower Arm Swivel: ±135°
- Upper Arm Swivel: ±180°
- Screen Swivel: ±90°
- Screen Rotation: 360°
5.4 Adjustment Video Guide
Video 5.1: Guide to Gas Spring Tension & Tilting Adjustment for MOUNTUP Monitor Mount (MU0025).
Video 5.2: Demonstration of the MOUNTUP Single Monitor Desk Mount (MU0025) functions.
6. Mantentzea
Regular maintenance ensures the longevity and optimal performance of your monitor mount.
- Garbiketa: Garbitu euskarria zapi leun batekin,amp oihal. Saihestu akabera kaltetu dezaketen garbitzaile edo disolbatzaile urratzaileak.
- Ikuskapena: Aldian-aldian egiaztatu torloju eta konexio guztiak ondo estuak eta sendoak daudela ziurtatzeko. Beharrezkoa bada, berriro estutu.
- Gas malgukia: If the gas spring tension feels off, refer to Section 5.1 for adjustment instructions.
7. Arazoak
Arazoren bat izanez gero, jo ezazu honako arazo eta irtenbide ohikoenei:
- Monitor arm falls down or shoots up: This indicates incorrect gas spring tension. Refer to Section 5.1 for proper adjustment based on your monitor's weight.
- Monitor tilts forward or backward unexpectedly: The tilting bolt may be loose. Refer to Section 5.2 to loosen, adjust, and retighten the tilting bolt.
- Mount feels unstable or wobbly: Ziurtatu C-cl-aamp or grommet base is securely tightened to the desk. Check all connection points on the arm and VESA plate.
- Besoa mugitzeko zailtasuna: The tension might be too high for a lighter monitor, or the joints might need lubrication (though typically not required for gas spring arms). Ensure no cables are snagged.
Arazoak jarraitzen badute, jarri harremanetan bezeroarentzako arreta-zerbitzuarekin.
8. Zehaztapenak
| Ezaugarri | Zehaztapena |
|---|---|
| Modelo zenbakia | MU0025 |
| Pantaila-tamaina bateragarria | 17 eta 32 hazbete artean |
| Pisu Edukiera | 4.4 - 17.6 lb (2 - 8 kg) |
| VESA bateragarritasuna | 75x75mm, 100x100mm |
| Muntatze Mota | C-Clamp / Grommet Base |
| C-Clamp Mahaiaren lodiera | 0.39" - 3.15" (10-80mm) |
| Mahaiaren lodiera, arandela-zuloekin | 0.39" - 3.15" (10-80mm) |
| Grommet zuloaren diametroa | 0.39" - 2.36" (10-60mm) |
| Materiala | Altzairua, aluminioa, plastikoa |
| Kolorea | Beltza |
| Max Height (from desk) | 22.64" (57.5 cm) |
| Gehienezko luzapena | 19.8" (50.3 cm) |
| Inklinazio barrutia | +90° / -45° |
| Pantaila birakaria | ±90° |
| Pantailaren biraketa | 360° |
9. Bermea eta Laguntza
All MOUNTUP monitor mounts are backed by 3-year support. Our friendly customer support team is available to answer any questions within 12 hours. For assistance, please visit the official MOUNTUP website or contact us directly through your purchase platform.
