Strymon Sunset Dual Overdrive Pedal User Manual

Sarrera

The Strymon Sunset is a versatile dual overdrive pedal designed to provide a wide range of classic overdrive and distortion tones. It features two independent channels, A and B, each offering distinct overdrive circuits, allowing for flexible tone shaping and stacking options. This manual provides detailed instructions on setting up, operating, and maintaining your Sunset pedal.

Konfigurazioa

Follow these steps to properly set up your Strymon Sunset pedal:

Potentzia-konexioa: Connect a standard 9V DC power supply (center-negative, 200mA minimum) to the 9VDC input jack on the rear panel. Ensure the power supply meets the specified voltage eta egungo eskakizunak.
Sarrerako konexioa: Konektatu zure gitarra edo beste instrumentu bat IN jack on the rear panel using a standard 1/4-inch instrument cable.
Irteerako konexioa: Konektatu KANPO jack on the rear panel to your amplifizatzailea edo zure seinale-kateko hurrengo pedala 1/4 hazbeteko instrumentu-kable estandar bat erabiliz.
Aukerako konexioak:
- Expression Pedal (EXP): For real-time control over parameters, connect an expression pedal to the EXP jack.
- Favorite Switch (FAV): Connect an external favorite switch to the FAV jack to recall a saved preset.

Atzekoa view of the Strymon Sunset pedal showing input, output, power, and control jacks.

Figure 1: Rear panel connections of the Strymon Sunset pedal. This view highlights the IN, OUT, FAV, EXP, and 9VDC power input jacks, along with the B->A and A+B switches.

Funtzionamendu-argibideak

The Strymon Sunset features two independent overdrive channels, A and B, each with unique voicings and controls. Understanding these controls is key to unlocking the pedal's full potential.

Goiena view of the Strymon Sunset pedal showing all knobs, switches, and footswitches.

Figure 2: Top panel controls of the Strymon Sunset pedal. This image displays the LEVEL, DRIVE, and TONE knobs for both channels, along with the A and B circuit type switches and footswitches.

Aurrealdeko paneleko kontrolak

Channel A Controls:
- LEVEL A: Adjusts the output volume of Channel A.
- DRIVE A: Controls the amount of gain/overdrive for Channel A.
- TONE A: Shapes the tonal character of Channel A, typically acting as a high-cut filter.
- A Circuit Switch: Selects between three distinct overdrive circuits for Channel A:
  - Ge (Germanium): Smooth, warm, and dynamic overdrive, reminiscent of classic germanium diode circuits.
  - Texas: Mid-focused, bluesy overdrive with a distinct character.
  - Altxorrak: A treble booster circuit, ideal for pushing an already overdriven amp or adding sparkle.
Channel B Controls:
- LEVEL B: Adjusts the output volume of Channel B.
- DRIVE B: Controls the amount of gain/overdrive for Channel B.
- TONE B: Shapes the tonal character of Channel B.
- B Circuit Switch: Selects between three distinct overdrive circuits for Channel B:
  - 2 Stage: A classic two-stage soft-clipping overdrive.
  - Gogorra: A harder clipping overdrive with increased compression and sustain.
  - JFET: A JFET-based circuit offering a more amp-like, natural overdrive.
Oinen etengailuak:
- A Footswitch: Engages or bypasses Channel A. The corresponding LED indicates its status.
- B Footswitch: Engages or bypasses Channel B. The corresponding LED indicates its status.

Atzeko paneleko etengailuak

B->A / A+B Switch: This switch determines the stacking order when both channels are engaged:
- B->A: Channel B feeds into Channel A. This is useful for boosting Channel A with Channel B's gain.
- A + B: Channels A and B run in parallel. This allows for blending the two distinct tones.
BRIGHT etengailua: A global switch that adds a subtle high-end boost to the overall output.
- +: Engages the bright boost.
- -: Disengages the bright boost.

Mantentzea

To ensure the longevity and optimal performance of your Strymon Sunset pedal, follow these maintenance guidelines:

Garbiketa: Use a soft, dry cloth to wipe down the pedal's enclosure. Avoid using abrasive cleaners or solvents, as they may damage the finish or internal components.
Biltegiratzea: Gorde pedala leku fresko eta lehor batean, eguzki-argitik, tenperatura altuetatik eta hezetasun handitik babestuta.
Elikatze-iturria: Always use a regulated 9V DC center-negative power supply that meets the pedal's current requirements (200mA minimum). Using an incorrect power supply can damage the unit and void the warranty.
Konexioak: Aldian-aldian egiaztatu kable-konexio guztiak higadura edo haustura dagoen. Ziurtatu entxufeak hautsik eta hondakinik gabe daudela.

Arazoak konpontzea

If you encounter issues with your Strymon Sunset pedal, refer to the following common problems and solutions:

Arazoa	Kausa posiblea	Irtenbidea
Soinurik ez edo seinale ahula.	Incorrect power supply, faulty cables, incorrect connections, pedal bypassed.	Verify power supply is 9V DC center-negative and provides at least 200mA. Check all instrument cables for continuity. Ensure guitar is connected to IN and amp to OUT. Press footswitches to engage channels (LEDs should light up).
Nahi gabeko zarata edo burrunba.	Lurreko begizta, elikatze-iturri akastuna, beste elektronika batzuen interferentziak.	Erabili elikatze-iturri isolatu bat. Saiatu beste korronte bat. Mugitu pedala potentzia-transformadoreetatik edo fluoreszentezko lanparetatik urrun. Kable akastunak egiaztatu.
LEDs not lighting up.	No power, pedal malfunction.	Confirm power supply is connected and functional. Ensure power outlet is active. If problem persists, contact Strymon support.

Zehaztapenak

Eredua:	Sunset Dual Overdrive
Potentzia-eskakizuna:	9V DC, erdiko negatiboa, gutxienez 200mA
Seinalearen formatua:	Analogikoa
Hardware Interfazea:	HP-HSC
Neurriak (L x W x H):	8 x 5 x 4 hazbete (20.3 x 12.7 x 10.2 cm)
Pisua:	1.34 libra (0.61 kg)
Kolorea:	Red, Silver
ASIN:	B0875MSLCJ
Lehen eskuragarri dagoen data:	16ko apirilaren 2020a

Bermea eta Laguntza

Strymon products are built with high-quality components and undergo rigorous testing. For information regarding warranty coverage, product registration, and technical support, please visit the official Strymon webwebgunera edo jarri harremanetan bezeroarentzako arreta-zerbitzuarekin. Gorde erosketa-agiria erosketaren frogagiri gisa berme-erreklamazioetarako.

Strymon Official Webgunea: www.strymon.net

	Strymon DIG Atzerapen Digital Bikoitzaren Hastapen Gida Azkarra Strymon DIG pedal digital bikoitzaren gida laburra, kontrolak, atzeko paneleko konexioak eta bestelakoak azaltzen dituena.amphainbat atzerapen efektu lortzeko ezarpenak.
	Strymon UltraViolet Vintage Vibe erabiltzailearen eskuliburua Strymon UltraViolet Vin-erako erabiltzailearen eskuliburu osoatagVibe efektuen pedala, aurrealdeko eta atzeko paneleko kontrolak, pizteko moduak, kanpoko kontrol aukerak (adierazpen pedalak, MIDI), MIDI zehaztapenak, fabrika berrezarpena, ezaugarriak, zehaztapen teknikoak barne hartzen dituena.ampezarpenak, bermea eta segurtasunari buruzko informazioa.
	Strymon Deco V2 Hasiera Azkarreko Gida: Zinta Saturazioa eta Doubletracker Efektu Pedala Hasi Strymon Deco V2 erabiltzen, zinta saturazio eta doubletracker efektu pedalarekin. Hasiera azkarreko gida honek kontrolak, konexioak eta... azaltzen ditu.ampZinta klasiko eta oihartzun bikoitzeko soinuen ezarpenak.
	Strymon Flint Tremolo eta Reverb Abiarazte Gida Azkarra Strymon Flint Tremolo & Reverb efektuen pedalerako hasiera azkarreko gida, bere botoiak, etengailuak eta atzeko paneleko konexioak zehaztuz.
	Strymon blueSky erreberberatzailearen hasiera azkarreko gida Strymon blueSky Reverberator pedalaren hasiera azkarreko gida, bere botoiak, etengailuak, atzeko paneleko konexioak eta xehetasunak azalduz.ample ezarpenak.
	Strymon Volante Oihartzun Magnetikoko Makinaren Erabiltzaile Eskuliburua Strymon Volante Oihartzun Magnetikoko Makinaren erabiltzailearen eskuliburu osoa, bere ezaugarriak, kontrolak eta funtzionamendu moduak zehaztuz.

Strymon Sunset