iBeam Mikro Kamera Beltza Angelu Finkoko Erabiltzaile Eskuliburua

1. Sarrera

This manual provides detailed instructions for the installation, operation, and maintenance of your iBeam Micro Camera Black Fixed Angle (Model TE-MICM). This camera is designed to enhance vehicle safety by providing clear visual assistance. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Segurtasun informazioa

• Deskonektatu beti ibilgailuaren bateria edozein instalazio elektriko hasi aurretik.
• Ziurtatu kableatu guztiak behar bezala isolatuta eta finkatuta daudela zirkuitulaburrak edo kalteak saihesteko.
• Ez oztopatu gidariaren view or interfere with vehicle controls during installation.
• Instalazio prozesuaren edozein atalen inguruan ziur ez bazaude, kontsultatu instalatzaile profesional bati.
• This product is intended as an aid and should not replace safe driving practices.

3. Paketearen edukia

Egiaztatu elementu guztiak paketean daudela:

• iBeam Micro Camera Black Fixed Angle (TE-MICM)
• Mounting Hardware (8MM threaded bolt, nuts, washers)
• Kableatu Harness
• Argibide eskuliburua (dokumentu hau)

Image: The retail packaging for the iBeam Micro Camera, showing the camera and its model number on the box.

4. Produktua amaitu daview

The iBeam Micro Camera (TE-MICM) is a compact, fixed-angle camera designed for various vehicle applications, including backup assistance. It features a durable, water-resistant design and provides a clear image for enhanced visibility.

Irudia: Gertutik view of the iBeam Micro Camera, highlighting its compact black housing and the camera lens.

Ezaugarri nagusiak:

• Diseinu trinkoa: Small footprint for discreet installation.
• Urarekiko erresistentea: IP68 ziurtagiria du eguraldi-baldintza desberdinetan errendimendu fidagarria bermatzeko.
• Irudi-sentsorea: 1/4 CMOS image sensor for clear video output.
• Switchable Image: Mirror/Normal image option for versatile mounting (e.g., rear view edo aurrean view).
• Muntaketa: Features an 8MM threaded bolt for secure mounting.

5. Konfigurazioa eta instalazioa

Follow these steps for proper installation of your iBeam Micro Camera:

1. Aukeratu muntatzeko kokapena: Aukeratu oztoporik gabeko kokapen bat view and allows for secure mounting. Common locations include above the license plate, on the bumper, or integrated into a vehicle panel. Consider the 18.7mm height of the camera housing for clearance.
2. Prestatu muntatzeko gainazala: If drilling is required, ensure no existing wiring or components will be damaged. Drill a hole appropriate for the 8MM threaded bolt.
3. Muntatu kamera: Insert the 8MM threaded bolt through the prepared hole and secure the camera using the provided nuts and washers. Ensure the camera is oriented correctly for the desired view.
4. Kableatu konexioak:
   • Connect the camera's power wire (typically red) to a 12V power source that is activated when the camera is needed (e.g., reverse light circuit for a backup camera, or ignition-switched power for a front camera).
   • Connect the camera's ground wire (typically black) to a clean chassis ground point.
   • Connect the video output cable from the camera to the video input of your display monitor or head unit.
5. Proba funtzionaltasuna: Before reassembling vehicle panels, test the camera's operation. Turn on the vehicle and engage the appropriate gear (e.g., reverse) to activate the camera. Verify that the image appears clearly on your display.
6. Kableatu segurua: Route all cables safely away from moving parts, heat sources, and sharp edges. Use zip ties or electrical tape to secure wiring.

Image: Illustration showing two common mounting options for the iBeam Micro Camera: a flush mount and a lip mount using the threaded bolt.

6. Funtzionamendu-argibideak

Once installed, the iBeam Micro Camera operates automatically when power is supplied to it and the connected display is active.

• Backup Camera Use: If connected to the reverse light circuit, the camera image will automatically appear on your display when the vehicle is shifted into reverse.
• Front/Side Camera Use: If connected to an ignition-switched power source or a manual switch, the camera can be activated as needed.
• Irudiaren orientazioa: The camera supports switchable mirror/normal image output. Refer to your installer or the camera's wiring diagram for instructions on how to change this setting, typically by cutting a specific wire loop.

7. Mantentzea

The iBeam Micro Camera is designed for low maintenance. Follow these guidelines to ensure longevity:

• Garbiketa: Aldian-aldian garbitu kameraren lentea zapi leun eta lehor batekinamp zapi bat erabili zikinkeria, hautsa edo ur orbanak kentzeko, oztopatu dezaketenak view. Do not use abrasive cleaners.
• Ikuskapena: Regularly check the camera's mounting and wiring connections to ensure they remain secure and free from damage.
• Saihestu presio handiko garbiketa: While water-resistant, avoid directing high-pressure water sprays directly at the camera lens or housing, as this could potentially compromise the seal.

8. Arazoak

If you experience issues with your iBeam Micro Camera, refer to the following common problems and solutions:

9. Zehaztapenak

10. Bermea eta Laguntza

For warranty information and technical support, please contact iBeam customer service or visit the official iBeam webgunea. Gorde erosketa-agiria erosketaren frogagiri gisa, berme-erreklamazioetarako.

Fabrikatzailea: Metra Electronics Corp