Eskuliburuak+

Lepro 410084-RGB-US-NF-a

Lepro 32.8ft RGB LED Strip Lights User Manual

Model: 410084-RGB-US-NF-a

1. Sarrera

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Lepro 32.8ft RGB LED Strip Lights. This kit includes two 16.4ft flexible LED strips, a 44-key IR remote control, and a 12V power supply. The LED strips offer a wide range of colors and dynamic modes, suitable for various indoor lighting applications.

Lepro 32.8ft RGB LED Strip Lights kit showing two rolls of LED strips, a remote control, and a power adapter.

Figure 1: Complete Lepro LED Strip Lights Kit

2. Paketearen edukia

Egiaztatu osagai guztiak paketean daudela:

  • 2 x 16.4ft (5m) RGB LED Strip Lights
  • 1 x 44 teklako IR urrutiko agintea
  • 1 x 12 V-ko egokitzaile egokitzailea
  • 1 x Control Box (IR Receiver)

3. Instalazioa eta konfigurazioa

Instalazio egokia lortzeko, jarraitu urrats hauek:

  1. Prestatu gainazala: Ziurtatu instalazio-gainazala garbi, lehor eta leun dagoela. Hautsak, olioak edo hezetasunak itsasgarriaren errendimenduan eragina izan dezakete.
  2. Neurtu eta moztu (aukerakoa): If a shorter length is required, the LED strip can be cut along the designated cut marks (usually every 3 LEDs). Use sharp scissors to ensure a clean cut. Do not cut at any other point.
  3. Lotu tira: Carefully peel off the backing from the 3M adhesive tape on the back of the LED strip. Press the strip firmly onto the desired surface.
  4. Konektatu osagaiak:
    • Connect the LED strip(s) to the control box. Ensure the arrows on the connectors align.
    • Connect the 12V power adapter to the control box.
    • Entxufatu korronte-egokigailua entxufe elektriko estandar batean.
  5. Aktibatu urrutiko agintea: Before using the remote control, remove the transparent plastic insulation sheet from the battery compartment.
Diagram showing the connection of LED strip lights to the control box and power adapter, with an arrow indicating to pull out the plastic chip from the remote.

Figure 2: Connection Diagram for LED Strip Lights

For a visual guide on installation and various applications, please refer to the official product video below:

Video 1: Official Lepro LED Strip Lights Overview and Application Examples. This video demonstrates the product's features and shows various installation scenarios in different rooms.

4. Funtzionamendu-argibideak

The 44-key IR remote control allows you to manage the LED strip lights. Point the remote directly at the IR receiver on the control box for optimal response.

44-key IR remote control for LED strip lights, showing buttons for colors, brightness, and dynamic modes.

Figure 3: 44-Key IR Remote Control Layout

Urruneko kontrolaren funtzioak:

  • Aktibatu/Desaktibatuta: Power button to turn the lights on or off.
  • Distira doitzea: Up/Down arrows to increase or decrease brightness.
  • Kolore aukeraketa: 20 preset static colors, including Red, Green, Blue, and White.
  • DIY Colors: 6 programmable buttons (DIY1-DIY6) to save custom colors. Press a DIY button, then use the R/G/B up/down arrows to adjust the color, and press the DIY button again to save.
  • Modu dinamikoak: 8 pre-programmed lighting modes (e.g., JUMP3, JUMP7, FADE3, FADE7, AUTO, FLASH, QUICK, SLOW) for various effects.

5. Mantentzea

To ensure the longevity and optimal performance of your LED strip lights, follow these maintenance guidelines:

  • Garbiketa: Gently wipe the LED strips with a dry, soft cloth to remove dust. Avoid using liquid cleaners or abrasive materials.
  • Ingurumena: These lights are designed for indoor use. Avoid exposure to water, high humidity, or extreme temperatures.
  • Itsasgarriaren zaintza: The 3M adhesive is strong. If repositioning is necessary, do so carefully to avoid damaging the strip or the surface. Ensure the surface is clean before initial application to maximize adhesion.

6. Arazoak

If you encounter issues with your LED strip lights, consult the following table for common problems and solutions:

ArazoaKausa posibleaIrtenbidea
Argiak ez dira pizten.
  • Korronte egokitzailea ez dago konektatuta.
  • Remote battery depleted or plastic tab not removed.
  • Incorrect connection between strip and control box.
  • Ensure power adapter is securely plugged into outlet and control box.
  • Remove plastic tab from remote battery. Replace battery if necessary.
  • Verify arrow alignment on all connectors.
Urruneko kontrola ez dabil.
  • Remote not pointed at IR receiver.
  • Oztopoa urrutiko agintearen eta hargailuaren artean.
  • Remote battery issue.
  • Point remote directly at the small black IR receiver on the control box.
  • Kendu edozein oztopo.
  • Egiaztatu/ordezkatu urrutiko agintearen bateria.
Some LEDs show incorrect color or are off.
  • Damage to a section of the LED strip.
  • Konexio akastuna.
  • Inspect the strip for physical damage. If a section is damaged, it may require replacement.
  • Ziurtatu konexio guztiak seguruak direla.
LED strip falls off surface.
  • Surface not clean or smooth.
  • Presio nahikorik ez instalazioan zehar.
  • Clean the surface thoroughly before re-applying.
  • Apply firm, even pressure along the entire strip during installation. Consider using additional adhesive clips for heavy-duty applications.

7. Produktuaren zehaztapenak

EzaugarriXehetasuna
MarkaLeproa
Modelo zenbakia410084-RGB-US-NF-a
KoloreaRGB (gorria, berdea, urdina)
Barruko/Kanpoko erabileraBarruan
Ezaugarri BereziaErregulagarria
Argi iturri motaLED
Energia iturriaKable elektrikoa
MaterialaKobrea, Plastikoa
Kontrolagailu motaUrruneko Kontrola
Argi-iturri kopurua300 (total for 32.8ft)
liburukiatage12 Volt
Wattage36 watt
Elementuaren pisua0.33 kilogramo (11.6 ontza)
Elementuaren luzera32.8 Feet (2 x 16.4ft)

8. Bermearen informazioa

Produktu hau a 2 urteko bermea from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

9. Bezeroarentzako arreta

For technical assistance, warranty claims, or any questions regarding your Lepro LED Strip Lights, please contact Lepro customer support through their official website or the retailer where the product was purchased. Please have your model number (410084-RGB-US-NF-a) and proof of purchase available when contacting support.

Erlazionatutako dokumentuak - 410084-RGB-US-NF-a

Aurreview Lepro S1 LED Banda Adimendunaren Erabiltzaile Eskuliburua
Lepro S1 LED Banda Adimendunaren (Modeloa: 2A3MAS1) erabiltzailearen eskuliburu osoa, instalazioa, funtzionamendua eta ezaugarriak zehaztuz.
Aurreview Lepro LED argi-zerrenda erabiltzailearen eskuliburua eta zehaztapenak
Lepro LED argi-zerrenden erabiltzailearen eskuliburua (PR4100067 serieko modeloa). Instalazioari, segurtasunari, zehaztapenei eta botatzeari buruzko informazioa barne hartzen du.
Aurreview Lepro S1 LED Banda Adimenduna: Instalazioa, Ezaugarriak eta Segurtasun Gida
Lepro S1 LED Banda Adimendunaren gida osoa, instalazioa, aplikazioaren konexioa, ahots-kontrolaren integrazioa, segurtasun-neurriak, zehaztapen teknikoak eta bermearen informazioa biltzen dituena.
Aurreview Lepro AI LED kanpoko argi iraunkorrak erabiltzailearen eskuliburua eta segurtasun gida
Lepro AI LED kanpoko argi iraunkorren gida osoa, instalazioa, aplikazioaren konexioa, ahots-kontrola, segurtasun-neurriak eta E1-30, E1-60 eta E1-90 modeloen zehaztapen teknikoak barne hartzen dituena.
Aurreview Lepro R2 LED Beheko Argi Adimendunaren Instalazio eta Erabiltzaile Gida
Lepro R2 Smart LED Downlight instalatzeko eta erabiltzeko gida osoa, aplikazioaren konexioa, ahots-kontrolaren konfigurazioa, muntaketa eta segurtasun-informazioa biltzen dituena.
Aurreview Lepro ZB1 AI LED kanpoko kate-argien erabiltzailearen eskuliburua eta zehaztapenak
Lepro ZB1 AI LED kanpoko kate-argien erabiltzailearen eskuliburu osoa eta zehaztapen teknikoak, ezaugarriak, instalazioa eta betetzeari buruzko informazioa zehaztuz.