1. Sarrera
Klein Tools CL120 Cl digitalaamp Meter is an automatically ranging digital clamp-meter designed for professional and DIY electrical tasks. It measures AC current and Non-Contact Voltage (NCVT) via the clamp, eta AC/DC voltage, resistance, and continuity via test-leads. This manual provides essential information for safe and effective operation of your CL120 Digital Clamp Neurgailua.
2. Segurtasun informazioa
WARNING: Risk of electric shock or personal injury.
- Beti babestu homologatutako babesak.
- Ez erabili neurgailua edo probako kableak hondatuta agertzen badira.
- Ez erabili zehaztutako bolumena gainditzen duten zirkuituetan.tage eta egungo balorazioak.
- Ensure the meter is turned OFF before connecting or disconnecting test leads.
- Kontuz ibili zirkuitu biziekin lan egitean.
- Refer to local and national safety codes.
3. Paketearen edukia
- CL120 Digital Clamp Metroa
- Eramateko zorroa
- Test Leads with CAT III/CAT IV Safety Caps
- 3 x AAA bateria
- Argibide eskuliburua
4. Produktuaren ezaugarriak
- Polifazetikoa Clamp Neurgailua: Measures AC current and NCVT via clamp; AC/DC voltage, resistance, and continuity via test-leads.
- Kontaktu gabeko boltage Probak: Cl-an integratuta.amp jaw for convenient electrical testing.
- Atzeko argiztatutako pantaila: LCD shows clear readings in low-light conditions for enhanced visibility.
- Neurketa zehatzak: Auto-ranging technology selects the appropriate measurement range for accurate results.
- Ezaugarri erosoak: Test lead holder on the side of the clamp esku libreko funtzionamendurako.
- Ezaugarri gehigarriak: Max, Data Hold capability for enhanced functionality and auto-power off after 10 minutes to conserve battery life.
5. Konfigurazioa
5.1 Bateriaren instalazioa
- Ziurtatu neurgailua itzalita dagoela.
- Using a Phillips head screwdriver, loosen the screw on the battery compartment cover located on the back of the meter.
- Remove the cover and insert 3 AAA batteries, observing correct polarity.
- Jarri bateriaren konpartimenduaren estalkia eta estutu torlojua.
5.2 Proba-kablearen konexioa
Connect the red test lead to the VΩmA input jack and the black test lead to the COM input jack for voltage, erresistentzia eta jarraitutasun neurketak.
6. Funtzionamendu-argibideak
6.1 Piztu/Itzali
Rotate the function dial from the OFF position to any desired measurement function to power on the meter. Rotate the dial back to OFF to power off.
6.2 Korronte alternoaren neurketa (Clamp)
- Rotate the function dial to the 2/20A~ or 200/400A~ position.
- Ireki clamp masailezurra abiarazlea sakatuz.
- Jarri clamp jaw around a single conductor (not a power cord with multiple wires) to measure AC current.
- Irakurri uneko balioa pantailan.
6.3 AC/DC Voltage Neurketa (proba-kableak)
- Rotate the function dial to the V~ (AC Voltage) edo V- (DC bolumenatage) posizioa.
- Connect the test leads to the circuit points you wish to measure.
- Irakurri liburukiatagPantailako balioa.
6.4 Resistance and Continuity Measurement
- Rotate the function dial to the Ω (Resistance) or Continuity position.
- Konektatu proba-kableak neurtu beharreko osagai edo zirkuituan.
- For continuity, the meter will beep if a continuous path is detected. For resistance, read the value on the display.
6.5 Harremanik gabeko Voltage (NCV) Detekzioa
Press the NCV button and hold the meter's tip near a live AC voltage source. The meter will emit an audible beep and the NCV indicator light will illuminate if AC voltage detektatzen da.
6.6 Backlight and Data Hold/Max Functions
- Atzeko argia: Press the backlight button to illuminate the display for better visibility in low-light conditions.
- Datuak gordetzea: Sakatu HOLD botoia pantailan uneko irakurketa izozteko. Sakatu berriro askatzeko.
- MAX: Press the MAX button to capture the maximum reading during a measurement.
7. Mantentzea
7.1 Garbiketa
Garbitu neurgailua zapi lehor eta lihorik gabeko batekin. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
7.2 Bateria ordezkatzea
Ordeztu bateriak bateria baxuaren adierazlea pantailan agertzen denean. Ikusi 5.1 atala bateria instalatzeko argibideak lortzeko.
8. Arazoak
- Neurgailua ez da pizten: Bateriaren instalazioa egiaztatu eta ziurtatu bateriak ez daudela agortuta.
- Irakurketa zehaztugabeak: Ensure test leads are properly connected and the correct function is selected. Verify the circuit is within the meter's specified range.
- Jarraitutasun-txirrinik ez: Ensure the circuit is de-energized and the component is not open.
9. Zehaztapenak
| Zehaztapena | Balioa |
|---|---|
| Marka | KLEIN TRESNAK |
| Modelo zenbakia | CL120 |
| Energia iturria | Pilaz elikatzen da (3 x AAA barne) |
| Korronte alternoko korrontea | 400 Amp |
| AC / DC boltage Barrutia | 600 volt arte |
| Erresistentzia sorta | Gehienez 20 MΩ |
| Jarraitasuna | Bai |
| Kontaktu gabeko boltage (NCV) | Bai |
| Pantaila retroiluminatua | Bai |
| Auto-sorta | Bai |
| Data Hold / Max | Bai |
| Segurtasun Balorazioa | CAT III 600V |
| Elementuaren pisua | 9.8 ontza (0.61 libra) |
| Produktuaren neurriak (L x W x H) | 8.45 x 3.51 x 1.51 hazbete |
10. Produktu Ofizialen Bideoak
1. bideoa: Berrikuspen osoaview Klein Tools CL120 Digital Cl-arenaamp Meter, demonstrating its features and practical applications, including use with a line splitter.
Video 2: An informational video covering essential aspects and functionalities of the Klein Tools Clamp Neurgailua.
Video 3: A showcase of Klein Tools Digital Clamp Meters, highlighting their robust design and various measurement capabilities.
Video 4: A comparison between the Klein Tools CL120 and CL390 clamp meters, helping users decide which model best suits their needs.
5. bideoa: Berrikuspen zehatzaview assessing the value and performance of the Klein Tools CL120 Digital Clamp Neurgailua.
Video 6: A demonstration of the Klein Digital Clamp Meter in various electrical testing scenarios.
11. Bermea eta Laguntza
Klein Tools products are manufactured to high standards of quality and durability. For warranty information, product registration, or technical support, please visit the official Klein Tools webwebgunera edo jarri harremanetan bezeroarentzako arreta-zerbitzura. Gorde erosketa-agiria berme-erreklamazioetarako.
For further assistance, please refer to the contact information provided on the official Klein Tools webgunea: www.kleintools.com
