CHACON 99050 Tenporizadore Mekanikoaren Argibideen Eskuliburua

1. Sarrera

The CHACON 99050 Mechanical Timer is designed to automatically switch electrical appliances ON and OFF at pre-set times. This device helps manage power consumption by controlling the operating periods of connected equipment. It features a 24-hour dial with 15-minute segments for precise scheduling.

2. Segurtasun-argibideak

• Barruko erabilerarako soilik.
• Do not exceed the maximum load of 3500W (16A).
• Ensure the timer and connected appliance are dry before use.
• Ez murgildu uretan edo ez jarri gehiegizko hezetasunean.
• Mantendu haurren eskura.
• Do not disassemble or attempt to repair the timer.

3. Produktua amaitu daview

The CHACON 99050 Mechanical Timer features a compact square design with a 24-hour rotating dial and a manual override switch.

1. irudia: Aurrealdea view of two CHACON 99050 Mechanical Timers, highlighting the 24-hour dial and the power socket.

• 24 orduko markagailua: Displays time and allows setting ON/OFF periods.
• Denbora-segmentuak (Pinak): Small, push-down segments around the dial. Each segment represents 15 minutes.
• Eskuz gainditzeko etengailua: Located on the side, allows immediate activation or deactivation of the connected appliance, bypassing the set program.
• Energiaren entxufea: Kontrolatu beharreko tresna entxufatuta dagoen tokia.

4. Konfiguratzeko argibideak

1. Plug in the Timer: Insert the CHACON 99050 Mechanical Timer into a standard 230V wall socket.
2. Ezarri uneko ordua: Rotate the 24-hour dial clockwise until the current time aligns with the arrow indicator on the timer's body. Ensure AM/PM is correctly observed (e.g., 1 PM is 13 on the dial).

Figure 2: The mechanical timer plugged into a wall outlet, ready for use.

5. Funtzionamendu-argibideak

1. Program ON/OFF Periods:

   The dial is divided into 15-minute segments. To set a period when the appliance should be ON, push down the corresponding segments around the dial. To set a period when the appliance should be OFF, leave the segments in the up position. You can set up to 48 ON/OFF cycles per day.

   Example: To turn an appliance ON from 7:00 AM to 8:00 AM, push down the segments from 7 to 8 on the dial.
2. Konektatu tresna: Plug the electrical appliance you wish to control into the power socket on the front of the timer. Ensure the appliance's own power switch is set to the ON position.
3. Eskuz gainditzea:

   The timer includes a lateral switch. This switch allows you to manually override the programmed settings:

   • Ezarri gisa "PIZTUTA": The appliance will remain continuously ON, regardless of the dial settings.
   • Ezarri gisa "TENPORIZADOREA": The appliance will operate according to the programmed ON/OFF cycles.

6. Mantentzea

• Clean the timer with a dry, soft cloth. Do not use liquid cleaners or solvents.
• Gorde tenporizadorea leku fresko eta lehor batean erabiltzen ez duzunean.
• Regularly check the timer and its connections for any signs of damage.

7. Arazoak

• Appliance does not turn ON/OFF at programmed times:
  • Check if the timer is correctly plugged into the wall socket.
  • Verify that the current time is accurately set on the dial.
  • Ensure the correct segments are pushed down for the desired ON periods.
  • Confirm the manual override switch is set to "TIMER".
  • Check if the connected appliance's power switch is in the ON position.
  • Ensure the appliance is functioning correctly when plugged directly into a wall socket.
• Timer is not rotating:
  • Ziurtatu tenporizadorea hormako entxufe batera konektatuta dagoela.
  • The timer is mechanical and relies on the mains power to operate its internal clock. If the power is interrupted, the time setting may become inaccurate.

8. Zehaztapenak

9. Bermea eta Laguntza

For information regarding warranty, technical support, or service, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for warranty claims.