Fenge ED-S48102WE Electric Standing Desk User Manual

1. Sarrera

Thank you for choosing the Fenge ED-S48102WE Electric Standing Desk. This manual provides comprehensive instructions for the assembly, operation, and maintenance of your new desk. Designed to enhance your workspace ergonomics and productivity, this desk features electric height adjustment, memory presets, and an anti-collision system. Please read this manual thoroughly before assembly and use to ensure safe and optimal performance.

Image 1.1: The Fenge ED-S48102WE Electric Standing Desk, showcasinbere diseinu dotorea eta kontrol-panel integratua ditu.

Image 1.2: Illustrates the versatility of the Fenge standing desk, allowing users to switch between sitting and standing positions for improved well-being.

2. Segurtasun informazioa

• Ziurtatu osagai guztiak ondo lotuta daudela erabili aurretik.
• Ez gainkargatu mahaia. Gehienezko pisu-ahalmena 80 kg (176.3 lb) da.
• Mantendu haurrak eta maskotak mahaitik urrun funtzionamenduan zehar.
• Ensure there are no obstructions in the desk's path during height adjustment to prevent damage or injury. The anti-collision feature will stop movement if an obstruction is detected.
• Erabili emandako korronte-egokigailua soilik.
• Ez desmuntatu edo aldatu mahaiaren osagai elektrikoak. Jarri harremanetan bezeroarentzako arreta-zerbitzuarekin zerbitzua jasotzeko.

3. Paketearen edukia

Please verify that all parts are present and undamaged before beginning assembly. If any parts are missing or damaged, please contact Fenge customer support.

• Desk Top (1 piece, 110x60cm, 16mm thick)
• Desk Legs/Frame (2 pieces)
• Control Panel with Memory Function
• Elikatze-egokigailua eta kableak
• Reinforcement Pipe
• Height Adjustment Feet (Adjusters)
• Muntaketa-osagarriak (torlojuak, Allen giltza, etab.)
• Argibide eskuliburua

4. Muntatzeko jarraibideak

Follow these steps carefully to assemble your Fenge Electric Standing Desk. It is recommended to have two people for assembly.

1. Deskonprimitu osagaiak: Kontu handiz atera pieza guztiak paketetik eta jarri gainazal garbi eta leun batean marradurak saihesteko.
2. Lotu mahaiaren hankak: Secure the desk legs to the underside of the desk top using the provided screws. Ensure they are aligned correctly.
3. Install Reinforcement Pipe: Attach the reinforcement pipe between the two desk legs. This enhances stability.
   

   Image 4.1: The reinforcement pipe provides additional stability to the desk frame.

4. Kontrol panela erantsi: Mount the control panel to the underside of the desk top in an easily accessible location.
5. Konektatu potentzia eta kontrol kableak: Konektatu motorraren kableak hanketatik kontrol-kutxara, eta gero konektatu kontrol-paneleko kablea kontrol-kutxara. Azkenik, konektatu korronte-egokitzailea kontrol-kutxara eta entxufe batera.
   

   Image 4.2: Proper cable management under the desk ensures a tidy and safe setup.
6. Install Height Adjustment Feet: Screw the adjustable feet into the bottom of the desk legs. These can be adjusted to level the desk on uneven surfaces.
   

   Image 4.3: Adjustable feet allow for leveling the desk and ensuring stability.

7. Initial Power-On and Reset: After connecting all cables, plug in the desk. Perform an initial reset by pressing and holding the 'Down' button until the desk reaches its lowest position and then slightly rises. This calibrates the desk.

5. Funtzionamendu-argibideak

5.1. Kontrol panela baino gehiagoview

Image 5.1: The control panel features up/down arrows, memory presets (1-4), and a 'Set' button.

• Gora (▲) / Behera (▼) botoiak: Press and hold to adjust the desk height manually. Release to stop.
• Memoria aurrezarpenak (1, 2, 3, 4): Store and recall up to four preferred height settings.
• 'S' (Set) Button: Used to save a desired height into a memory preset.

5.2. Mahaiaren altuera doitzea

• Eskuzko doikuntza: Press and hold the Up (▲) or Down (▼) button until the desk reaches your desired height.
• Memoria aurrezarpenak erabiltzea: Press the corresponding memory button (1, 2, 3, or 4) to automatically move the desk to the saved height.

5.3. Memoria aurrezarpenak ezartzea

1. Egokitu mahaia nahi duzun altuerara Gora (▲) edo Behera (▼) botoiak erabiliz.
2. Press the 'S' (Set) button. The display will show 'S'.
3. Within 3 seconds, press one of the memory buttons (1, 2, 3, or 4). The current height will be saved to that preset.

5.4. Talkaren aurkako sistema

The Fenge ED-S48102WE desk is equipped with an anti-collision system. If the desk encounters an obstruction during height adjustment, it will automatically stop and reverse slightly (2-3 cm) to prevent damage. Ensure the area around the desk is clear before operation, but this feature provides an extra layer of safety.

6. Mantentzea

• Garbiketa: Garbitu mahaiaren gainazala eta markoa oihal leun eta lehor batekinamp oihal. Saihestu garbitzaile urratzaileak edo produktu kimiko gogorrak.
• Ikuskapena: Aldian-aldian egiaztatu torloju eta konexio guztiak ondo estuak daudela ziurtatzeko.
• Kableen kudeaketa: Ensure cables are neatly organized and not pinched or tangled, especially during height adjustments.

7. Arazoak

8. Zehaztapenak

Image 8.1: Detailed dimensions and height adjustment range of the Fenge ED-S48102WE desk.

9. Bermea eta Laguntza

This Fenge product comes with a 12 hilabeteko bermea from the date of purchase. In case of initial defects or issues during the warranty period, please contact Fenge customer support for assistance with returns or exchanges.

For further inquiries or technical support, please refer to the contact information provided with your purchase or visit the official Fenge webgunea.