1. Segurtasun informazioa
Please read all safety instructions before operating this device. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Ensure the power supply matches the device's requirements (120VAC, 60Hz).
- Ez gainditu 15A/1875W-ko gehienezko karga.
- Keep the controller and probe away from water or excessive moisture, except for the waterproof probe tip.
- Ez desmuntatu edo aldatu gailua. Mantendu konponketa guztiak langile kualifikatuen esku.
- Always unplug the controller from the power outlet before cleaning or performing maintenance.
- This device is equipped with overload protection. In case of an overload, the power output and screen display will automatically cut off to prevent damage.
Image 1.1: Overload Protection Feature. This image shows the iPower temperature controller with a visual indicator pointing to the power cord, emphasizing the 'OVERLOAD PROTECTED' text. It explains that in case of an overload, the power output and screen display will be cut off.
2. Produktua amaitu daview
The iPower Professional Digital Heating and Cooling Temperature Controller is designed to maintain precise temperature control for various applications, including seed germination, reptile habitats, brewing, and greenhouse environments. It features dual outlets for simultaneous heating and cooling device control, a digital display, and a waterproof temperature probe.
2.1 Paketearen edukia
- iPower Digital Temperature Controller (Model GLCTRLHEATCOOL15)
- Waterproof Temperature Probe
- Erabiltzailearen eskuliburua
2.2 Ezaugarri nagusiak
- Funtzio bikoitza: Controls both heating and cooling devices simultaneously.
- Zehaztasun handia: Professional-grade waterproof temperature probe.
- Bistaratze digitala: Dual readouts for measured (PV) and set (SV) temperatures.
- Unitatearen hautaketa: Supports both Fahrenheit (°F) and Celsius (°C).
- Eragiketa erraza: Intuitive 6-button interface.
- Gainkarga babesa: Enhances safety by cutting power during overloads.
2.1. irudia: Aurrealdea View of the iPower Temperature Controller. This image displays the main unit of the iPower temperature controller, showing its digital display, control buttons, heating and cooling outlets, power cord, and the attached temperature probe.
Image 2.2: Independent Heating & Cooling Functionality. This image illustrates how the controller can manage both a heating device (represented by a sun icon) and a cooling device (represented by a snowflake icon) simultaneously through its dedicated outlets.
Image 2.3: LED Display and Power Indicators. This image highlights the clear and easy-to-read LED display of the controller, showing temperature readings and indicating the status of heating and cooling operations.
Image 2.4: Wide Range of Uses. This image displays various applications for the iPower temperature controller, including aquariums, greenhouses, seed germination, and reptile enclosures, demonstrating its versatility.
3. Konfigurazioa
3.1 Hasierako kokapena
Place the controller in a dry, stable location. Ensure adequate ventilation around the unit.
3.2 Muntaketa (Aukerakoa)
The controller can be mounted on a wall using the two keyholes located on the back of the unit. Securely fasten the controller to a suitable surface using appropriate screws (not included).
Image 3.1: Wall Mounting Option. This image shows the iPower temperature controller mounted on a wall, highlighting the keyholes on the back for secure installation.
3.3 Zunda konektatzea
Insert the temperature probe into the designated port on the controller. Position the probe in the environment where temperature monitoring and control are required. Ensure the probe tip is fully immersed or positioned correctly for accurate readings.
3.4 Gailuak konektatzea
- Plug your heating device into the outlet labeled 'HEATING'.
- Plug your cooling device into the outlet labeled 'COOLING'.
- Plug the controller's power cord into a standard 120VAC, 60Hz electrical outlet.
4. Funtzionamendu-argibideak
The controller features a 6-button interface for easy programming:
- POTENTZIA: Unitatea piztu / itzali egiten du.
- GORA: Balioak handitzen edo menuetan nabigatzen du.
- BEHERA: Balioak txikitzen edo menuetan nabigatzen du.
- SET: Programazio moduan sartzen da edo ezarpenak berresten ditu.
- CF/ST: Toggles between Celsius and Fahrenheit, or enters specific settings.
- CLR: Clears current input or exits programming mode.
4.1 Piztu/Itzaltzea
Sakatu BOTEREA button to turn the controller on. Press and hold the BOTEREA button for approximately 3 seconds to turn it off.
4.2 Display Readings
- PV (Prozesu Balioa): Displays the current measured temperature by the probe.
- SV (Ezarritako Balioa): Displays the target temperature you have set.
4.3 Setting Temperature Units (°F/°C)
Sakatu CF/ST button to toggle the temperature display between Fahrenheit (°F) and Celsius (°C).
4.4 Setting the Target Temperature (SV)
- Sakatu EZARTU button once. The SV display will begin to flash.
- Erabili UP or BEHERA buttons to adjust the target temperature to your desired value.
- Sakatu EZARTU button again to confirm the setting and exit programming mode.
4.5 Heating and Cooling Operation
Once the target temperature (SV) is set, the controller will automatically activate the heating or cooling outlet based on the current measured temperature (PV) and the set differential (hysteresis, typically pre-set). If PV is below SV, the heating outlet activates. If PV is above SV, the cooling outlet activates.
5. Mantentzea
5.1 Garbiketa
- Always unplug the controller before cleaning.
- Wipe the controller's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- The temperature probe can be cleaned with a damp cloth. Ensure it is dry before re-inserting into any environment.
5.2 Biltegiratzea
When not in use, store the controller in a cool, dry place, away from direct sunlight and extreme temperatures.
6. Arazoak
If you encounter issues with your iPower Temperature Controller, refer to the following common problems and solutions:
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Kontrolagailua ez da pizten. | No power supply; Power button not pressed correctly. | Ensure the controller is securely plugged into a live outlet. Press and hold the BOTEREA botoia 3 segundoz pizteko. |
| Controller does not turn on automatically after a power outage. | This model requires manual restart after power interruption. | Potentzia baten ondorentage, manually press and hold the BOTEREA button for 3 seconds to restart the unit. |
| Heating/Cooling device not activating. | Device not plugged in; Temperature not within activation range; Controller overload. | Check if the device is properly plugged into the correct outlet. Verify the set temperature (SV) and current temperature (PV). Check for overload condition. |
| Tenperaturaren irakurketa okerrak. | Probe improperly placed; Damaged probe. | Ensure the probe is correctly positioned and clean. If readings remain inaccurate, the probe may need replacement. |
| Controller trips circuit breaker. | Overload; Faulty device connected. | Ziurtatu wat osoatage of connected devices does not exceed 1875W. Test devices individually to identify a faulty one. |
7. Zehaztapenak
| Ezaugarri | Zehaztapena |
|---|---|
| Modelo zenbakia | GLCTRLHEATCOOL15 |
| Balorazio baloratuatage | 120VAC, 60Hz |
| Gehienezko karga | 15A / 1875W, 1/2HP, TV-5 |
| Probe Working Temperature | -58 eta 230 °F artean (-50 eta 110 °C artean) |
| Controller Working Temperature | -40 eta 176 °F artean (-40 eta 80 °C artean) |
| Produktuaren neurriak | 8.27 x 6.15 x 2.36 hazbete |
| Elementuaren pisua | 1.45 kilo |
| Bistaratzeko mota | LCDa |
| Zunda kablearen luzera | 75 hazbete (gutxi gorabehera) |
| Elikatze-kablearen luzera | 75 hazbete (gutxi gorabehera) |
Image 7.1: Controller Dimensions and Cable Lengths. This image provides a visual representation of the controller's physical dimensions (4.55" x 4.55" x 1.6") and the lengths of both the probe cable and power cable (75" each).
Image 7.2: Temperature Working Ranges. This image visually represents the working temperature ranges for both the controller (-40 to 176°F) and the probe (-58 to 230°F).
8. Bermea eta Laguntza
iPower products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official iPower webgunea. Gorde erosketaren egiaztagiria bermearen erreklamazioetarako.
For further assistance, you may contact iPower customer service through their official channels. Details are typically found on the product packaging or the manufacturer's webgunea.