Sylvac S_Cal EVO Basic kalibre digitalaren erabiltzailearen eskuliburua

Sarrera

This manual provides essential information for the proper use, setup, operation, and maintenance of your Sylvac S_Cal EVO Basic Digital Caliper. This basic digital caliper is designed for precise dimensional measurements and does not feature data output capabilities.

Image: The Sylvac S_Cal EVO Basic Digital Caliper, displaying a measurement of 20.58 mm on its digital screen. The caliper features a main scale marked in millimeters and inches, with the Sylvac logo and "S_Cal EVO Basic" text visible on the beam. It also indicates an IP67 rating for protection against dust and water.

Konfigurazioa

Bateriaren instalazioa

The S_Cal EVO Basic requires a Lithium battery for operation. Ensure the battery is correctly inserted before first use.

1. Locate the battery compartment cover on the digital unit.
2. Kontu handiz kendu estalkia.
3. Insert the Lithium battery, observing the correct polarity (+/-) as indicated inside the compartment.
4. Jarri bateriaren konpartimenduaren estalkia ongi.

Initial Power On and Zero Setting

After battery installation, the caliper should power on. If not, press the 'ON' button (if present, otherwise it might be automatic). To ensure accurate measurements, always zero the caliper before use.

1. Close the jaws completely, ensuring they are clean and free of debris.
2. Press the 'ZERO' button (or 'SET' button, as indicated on the device) to set the display to 0.00 mm (or 0.000 inch).
3. The caliper is now ready for measurement.

Funtzionamendu-argibideak

Kanpoko neurriak neurtzea

Use the outside jaws to measure external dimensions of an object.

1. Open the outside jaws wider than the object to be measured.
2. Place the object between the jaws.
3. Gently close the jaws until they make firm contact with the object. Do not apply excessive force.
4. Irakurri pantaila digitalean bistaratzen den neurketa.

Barne dimentsioak neurtzea

Use the inside jaws to measure internal dimensions, such as bore diameters.

1. Insert the inside jaws into the opening to be measured.
2. Open the jaws until they make firm contact with the internal surfaces.
3. Irakurri pantaila digitalean bistaratzen den neurketa.

Sakonera neurtzea

Use the depth rod to measure the depth of holes or steps.

1. Place the end of the main beam firmly on the surface from which the depth is to be measured.
2. Extend the depth rod into the hole or down to the step until it makes contact with the bottom surface.
3. Irakurri pantaila digitalean bistaratzen den neurketa.

Neurtzeko Urratsak

Use the step measuring faces to measure the height of steps.

1. Place the fixed jaw's step face on the higher surface.
2. Slide the movable jaw's step face down to the lower surface.
3. Irakurri pantaila digitalean bistaratzen den neurketa.

Unitate Bihurketa

If your model supports it, press the 'MODE' button to switch between millimeter (mm) and inch (in) units. The current unit will be indicated on the display.

Mantentzea

Garbiketa

Regular cleaning ensures the longevity and accuracy of your caliper.

• Wipe the caliper clean with a soft, lint-free cloth after each use.
• Zikinkeria egoskorrerako, erabili zapi arin batampened with isopropyl alcohol. Avoid harsh solvents.
• Ensure no liquid enters the electronic components.

Biltegiratzea

Proper storage protects the caliper from damage and environmental factors.

• Erabiltzen ez duzunean, gorde kalibrea bere zorro babeslean.
• Keep it in a dry environment, away from direct sunlight, extreme temperatures, and corrosive substances.
• Slightly open the jaws before storing to relieve tension on the measuring faces.

Bateria ordezkatzea

Replace the battery when the display becomes dim or shows a low battery indicator. Refer to the "Battery Installation" section for replacement steps.

Arazoak konpontzea

Zehaztapenak

Bermea eta Laguntza

For information regarding product warranty, please refer to the documentation provided with your purchase or visit the official Sylvac website. For technical support or service inquiries, please contact Sylvac customer service directly. Contact details are typically available on the manufacturer's webgunea edo produktuaren ontziak.

Manufacturer: Sylvac SA