KING KB ECO2S+ 5KW 240V Electronic Garage Heater Instruction Manual

1. Sarrera

The KING KB ECO2S+ series unit heater provides efficient and user-friendly heating for various spaces. This model, KB2405-1-ECO2S-PLUS, features a 5KW / 240V power output, 2-stage heating, and an integrated electronic thermostat with a remote control and remote temperature sensor for optimal comfort and energy savings. It is designed for use as primary or supplemental heat sources in warehouses, stores, or large garages.

Ezaugarri nagusiak:

Smart ECO2S+ Energy-Saving Design
2-StagBerokuntza: Automatikoki ur-kontsumo baxuena erabiltzen dutage needed for heating.
Includes ECO2S+ Remote Temperature Sensor for precise temperature monitoring.
Built-In Provision for Optional 24V Remote Thermostat, compatible with NEST and other 24V Wi-Fi thermostats.
Integrated fan-only and timer modes.
Spiral steel elements and high CFM for even air distribution and prolonged heater life.
Universal wall/ceiling bracket for simple installation.

2. Segurtasun informazio garrantzitsua

Read all instructions before installing or using this heater. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.

Segurtasun elektrikoa: Installation must be performed by a qualified electrician in accordance with all applicable local, state, and national electrical codes. Ensure the power supply is disconnected before any service or installation.
Muntaketa: Securely mount the heater using the provided universal bracket to a structural support capable of holding the unit's weight. Maintain proper clearances from combustible materials as specified in the installation section.
Eragiketa: Do not operate the heater with the grill removed. Do not block air inlets or outlets. Keep flammable materials away from the heater.
Mantentzea: Deskonektatu korrontea garbiketa edo mantentze-lanak egin aurretik.

3. Paketearen edukia

Egiaztatu elementu guztiak bertan daudela eta kalterik gabe daudela paketea irekitzean:

KING KB ECO2S+ Unit Heater (5KW / 240V)
Horma/sabairako muntaketa-euskarri unibertsala
Urruneko Kontrola
ECO2S+ Remote Temperature Sensor
Heavy-Duty Pigtail (for electrical connection)
Installation Hardware (lag bolts, nuts, grommet)
Erabiltzailearen eskuliburua

KING KB ECO2S+ heater unit, remote control, remote temperature sensor, and mounting bracket — Figure 1: Included components of the KING KB ECO2S+ heater package.

4. Instalazioa

4.1 Berogailua muntatzea

The universal mounting bracket allows for both wall and ceiling installation. Ensure the mounting surface is structurally sound to support the heater's weight (approximately 40 lbs). Use appropriate lag bolts or expansion bolts provided in the hardware pack.

Attach the universal bracket to the desired wall or ceiling location using appropriate fasteners.
Align the heater unit with the bracket and secure it using the large knobs on the sides, allowing for angle adjustment.
Adjust the heater angle to direct airflow as needed. The bracket offers four adjustable positions.

Itzuli view of KING KB ECO2S+ heater showing the fan and mounting points — 2. Irudia: Atzealdea view of the heater, illustrating the fan and mounting points for the bracket.

4.2 Kableatu elektrikoa

This heater requires a 240V dedicated circuit. Installation must be performed by a licensed electrician. The 5KW model typically requires a 40-amp breaker and 4-8 AWG copper wire. Ensure all local electrical codes are followed.

Deskonektatu energia: Turn off power at the main circuit breaker before beginning any wiring.
Access Wiring Compartment: Locate and remove the single Phillips screw on the side panel to open the wiring compartment.
Remove Knockout: Select an appropriate knockout on the side of the heater for your wiring. Use pliers to remove the knockout.
Install Strain Relief: Insert the provided grommet with integral strain relief into the knockout hole.
Konektatu kableak:
- Connect the black wire to the L1 terminal.
- Connect the red wire to the L2 terminal.
- Connect the green (ground) wire to the grounding screw.
Ensure all wires are securely tightened and that no insulation is under the terminals.
Kableatu segurua: Tighten the strain relief to prevent the wire from pulling out and to protect the wiring from damage.
Itxi konpartimentua: Reattach the access panel with the Phillips screw.
Berrezarri boterea: Turn on power at the main circuit breaker.

Internal wiring compartment of the KING KB ECO2S+ heater showing terminals and circuit board — Figure 3: Internal wiring connections for the heater.

Video 1: This video demonstrates the electrical wiring process for the KING KB ECO2S+ heater, showing how to connect the power cable to the internal terminals and secure it with a strain relief. It also highlights the 2-stage heating feature and remote temperature sensing.

4.3 External Thermostat Switch

On the back of the heater, there is a toggle switch to select between the built-in thermostat (setting I) and an external thermostat (setting II). For most applications using the integrated controls, ensure the switch is set to 'I'. If connecting to an external 24V thermostat (e.g., Nest), set the switch to 'II' and ensure proper wiring by a licensed electrician.

5. Funtzionamendu-argibideak

5.1 Hasierako piztea

Upon initial power-up, the unit will beep, and the display will show the current room temperature. This indicates correct voltage eta energia-iturria.

5.2 Kontrol-panela eta urrutiko agintea

The heater can be operated via the integrated control panel or the included remote control. The remote control offers convenient access to all functions from a distance.

Aurrealdea view of KING KB ECO2S+ heater showing the control panel — 4. irudia: Aurrealdea view of the heater with the control panel visible.

5.3 Funtzionamendu moduak

Sakatu 'Modua' botoia eskuragarri dauden funtzionamendu moduen artean aldatzeko:

Bero baxua: Bero-irteera txikiagoa ematen du.
Modu ekologikoa: Automatikoki doitzen du uratage to the lowest level needed to maintain the set temperature, optimizing energy efficiency.
Fan soilik: Circulates air without heating, useful for summer or general ventilation.
Bero handia: Provides maximum heat output.

5.4 Tenperaturaren ezarpena

Use the Up/Down arrow buttons on the control panel or remote to set your desired temperature. The heater will maintain this temperature automatically.

5.5 Tenporizadorearen funtzioa

The timer mode allows you to set the heater to run for a predetermined length of time, after which it will automatically shut off. This feature helps conserve energy and provides convenience.

6. Mantentzea

Mantentze-lan erregularrak berogailuaren errendimendu optimoa eta iraupena bermatzen ditu. Deskonektatu beti korrontea edozein mantentze-lan egin aurretik.

Garbiketa: Berogailuaren kanpoaldea aldian-aldian garbitu zapi leun eta lehor batekin.amp cloth. Ensure the air inlets and outlets are free from dust and debris. Do not use abrasive cleaners or solvents.
Ikuskapenak: Annually inspect electrical connections for tightness and signs of wear. Check the mounting bracket for security.
fan: Ensure the fan operates smoothly and is free from obstructions.

7. Arazoak

If your heater is not functioning correctly, refer to the following common issues and solutions:

Arazoa	Kausa posiblea	Irtenbidea
Heater does not turn on / No display.	No power to the unit or incorrect voltage.	Check circuit breaker. Ensure 240V power is supplied. Verify wiring connections are secure.
Berogailua piztuta dago, baina ez du berorik sortzen.	Thermostat switch set to external, or external thermostat not calling for heat.	Ensure the external thermostat switch on the back of the unit is set to 'I' for internal thermostat control. If using an external thermostat, check its settings.
Berokuntza nahikoa ez.	Incorrect mode selected, or obstructions.	Select 'High Heat' mode. Ensure air inlets/outlets are clear. Check louvers are directed appropriately.
Urruneko kontrola ez dabil.	Bateriak agortuta edo oztopoak.	Ordeztu urrutiko agintearen pilak. Ziurtatu ez dagoela oztoporik urrutiko agintearen eta berogailuaren artean.

8. Zehaztapenak

Marka: ERREGEA
Eredua: KB2405-1-ECO2S-PLUS
Potentzia irteera: 5KW
liburukiatage: 240V
Amparoa: 20.8 Amps
Abiadura kopurua: 2 (Baxua, Altua)
Erregai mota: Elektrikoa
Ezaugarri bereziak: Energy Efficient, Remote Control, Remote Temperature Sensor, 2-Stage Berokuntza
Kolorea: Beltza
Forma-faktorea: Kabinete
Barruko/Kanpoko erabilera: Barruan
Muntatze mota: Wall Mount (Universal bracket included)
Produktuaren neurriak: 16.5 x 15 x 13.5 hazbete
Elementuaren pisua: 40 kilo
UPC: 093319332399
Lehenengo eskuragarri: 29ko irailaren 2020a

Chart showing recommended garage heater wattage for different garage sizes — Figure 5: Recommended wattage for various garage sizes.

9. Bermea eta Laguntza

For specific warranty details, please refer to the documentation included with your product or contact KING customer support. General product protection plans may be available for purchase separately.

Itzulketak: Produktu honek normalean 30 eguneko itzulketa politika erraz bat eskaintzen du.
Babes Planak: Optional 4-Year Protection Plans and Complete Protect monthly plans may be available for extended coverage.
Bezeroarentzako laguntza: For technical assistance or service inquiries, please visit the KING store on Amazon or refer to the contact information provided in your product packaging.

Visit the official KING Store for more information: KING Store

	King KBP ECO2S+ Serieko Berogailu Trinkoa - Energia Eraginkorra 2-Stage Berokuntza King KBP ECO2S+ Serieko berogailu trinkoari buruzko informazio zehatza, energia aurrezteko ECO2S+ kontrol elektronikoa duena, 2 segundokoa.tagBerogailua, urrutiko tenperatura detekzioa eta instalazio aukera anitzak. Zehaztapenak, eskaera informazioa eta ingeniaritza xehetasunak barne hartzen ditu.
	King LPW-ECO Serieko Berogailuen Instalazio eta Mantentze Gida King LPW-ECO serieko berogailu elektronikoak instalatzeko, erabiltzeko eta mantentzeko gida osoa, segurtasun-argibideak, kableatu-diagramak, urruneko sentsorearen konfigurazioa eta arazoak konpontzea barne.
	King LPW ECO2S PRO instalazio eta mantentze eskuliburua kontrolatzaile adimendunarekin Eskuliburu oso honek King LPW ECO2S PRO serieko berogailu elektrikoak instalatzeko, mantentzeko eta erabiltzeko argibide zehatzak eskaintzen ditu. Ikasi instalazio seguruari, 7 eguneko ECO PRO kontrolatzailea programatzeari, kableatuari, arazoak konpontzeari eta bermeari buruzko informazioari buruz, erosotasun eta energia aurrezpen optimoa lortzeko.
	King PX-ECO 2-Stage Electronic Heater: Installation, Operation, and Troubleshooting Guide Comprehensive guide for the King PX-ECO 2-Stage Electronic Heater, covering installation, wiring diagrams, wattage selection, remote sensor setup, operating instructions, and troubleshooting. Includes safety precautions and maintenance.
	King PX ECO2S PRO 7 eguneko kontrolagailu programagarriaren instalazio eta erabilera eskuliburua King PX ECO2S PRO 7-Day Programmable 2-S-rako gida osoatagTenperatura urruneko detekzioarekin kontrolatzaile elektronikoa. Segurtasun argibideak, instalazioa, kableatua eta ura barne hartzen ditu.tage selection, controller pairing, setup, operation modes, programming, troubleshooting, maintenance, and optional sensor integration.
	King LPW ECO2S PRO berogailua: instalazio, mantentze eta erabilera eskuliburua King LPW ECO2S PRO 7-Day Programmable 2-S-rako gida osoatagBerogailu elektronikoa urruneko tenperatura sentsorearen kontrolagailuarekin. Instalazioa, kableatua eta ura barne hartzen ditu.taghautaketa, konfigurazioa, funtzionamendua, mantentze-lanak, arazoak konpontzea eta bermeari buruzko informazioa.

KING KB2405-1-ECO2S-PLUS