Aerocool ATOMICLITE V1 Mikro-ATX Joko-Kaxa Argibideen Eskuliburua

1. Sarrera

Thank you for choosing the Aerocool ATOMICLITE V1 Micro-ATX Gaming Case. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new PC case. Please read this manual thoroughly before beginning the assembly process to ensure optimal performance and longevity of your system components.

For additional support or information, please visit the official Aerocool webgunea.

2. Produktua amaitu daview

2.1 Ezaugarri nagusiak

• High Performance Gaming Minitower Case: Designed for optimum component performance, compatible with Micro-ATX and Mini-ITX motherboards.
• Graphics Card Support: Accommodates high-performance graphics cards up to 297mm in length.
• Gaming Lighting: Features a mesh front panel with two 14cm FRGB LED fans for optimal ventilation and lighting.
• Professional Cooling: Includes front and rear FRGB fans, dual-chamber design, and support for liquid cooling (front and back).
• Additional Cooling Options: Ventilation on front, top, and back, with support for up to two additional fans above the power supply for VGA cooling.
• CPU hozgailuaren sakea: Space for CPU heat sinks up to 158mm.
• Easy Multimedia Access: Top panel includes 2x USB 3.0, 1x USB 2.0, HD audio, microphone ports, and power/reset buttons.

2.2 Paketearen edukia

Mesedez, egiaztatu osagai guztiak paketean daudela:

• Aerocool ATOMICLITE V1 Micro-ATX Gaming Case
• Accessory box (containing screws, standoffs, cable ties, etc.)
• Argibide eskuliburua (dokumentu hau)

2.3 Osagaien identifikazioa

Familiarize yourself with the various parts of your ATOMICLITE V1 case.

1. irudia: Aurrealdeko angelua view of the Aerocool ATOMICLITE V1 case, showcasing the tempered glass side panel, the front mesh panel with an illuminated FRGB fan, and a rear FRGB fan.

2. irudia: Aurrealde zuzena view of the Aerocool ATOMICLITE V1 case, highlighting the full mesh front panel and the centrally mounted, illuminated FRGB fan.

3. Konfigurazioa eta instalazioa

3.1 Prestaketa

• Ziurtatu lan-eremu garbi eta ondo argiztatua duzula.
• Gather all necessary tools, including screwdrivers (Phillips head recommended).
• Unpack the case and remove all internal packaging materials.
• Remove the side panels by unscrewing the thumbscrews at the rear of the case.

3.2 Plaka amaierako instalazioa

1. Identify the pre-installed standoffs for Micro-ATX or Mini-ITX motherboards. Install additional standoffs if required for your specific motherboard form factor.
2. Kontu handiz jarri plaka basea euskarrien gainean, torloju-zuloak lerrokatuz.
3. Lotu plaka nagusia emandako torlojuekin. Ez estutu gehiegi.

3.3 Txartel grafikoaren (GPU) instalazioa

1. Kendu beharrezko PCIe zirrikituen estalkiak kaxaren atzealdetik.
2. Align your graphics card with the PCIe slot on the motherboard.
3. Sakatu astiro-astiro txartel grafikoa zirrikituan guztiz sartu arte.
4. Secure the graphics card to the case with screws. Note the maximum supported length of 297mm.

3.4 Biltegiratze unitatearen instalazioa

• 2.5 hazbeteko SSDak: Mount 2.5" SSDs behind the motherboard tray. Ensure to install these before the motherboard if access to screw holes is obstructed.
• 3.5 hazbeteko HDDak: Install 3.5" HDDs in the dedicated drive bays located in the power supply shroud area.

3.5 Energia hornitzeko unitatea (PSU) instalatzea

1. Slide the power supply into its designated compartment at the bottom rear of the case.
2. Secure the power supply to the case using screws from the rear.

3.6 Kableen kudeaketa

Utilize the space behind the motherboard tray and the provided cable tie points to route and secure cables. Proper cable management improves airflow and aesthetics.

3.7 Fan and Cooling System Installation

The ATOMICLITE V1 comes with pre-installed FRGB fans. Additional cooling options include:

• Hozte likidoa: Support for liquid cooling radiators at the front and rear.
• Additional Fans: Space for up to two additional fans above the power supply for enhanced VGA cooling.

4. Funtzionamendu-argibideak

4.1 Aurrealdeko panelaren konexioak

Connect the front panel cables (USB, Audio, Power, Reset, LED) to the corresponding headers on your motherboard. Refer to your motherboard manual for specific header locations.

• USB 3.0: Connect the USB 3.0 cable to the motherboard's USB 3.0 header.
• USB 2.0: Connect the USB 2.0 cable to the motherboard's USB 2.0 header.
• HD audioa: Connect the HD Audio cable to the motherboard's audio header.
• Power/Reset Buttons: Connect the Power SW and Reset SW cables to the motherboard's front panel headers.
• LED adierazleak: Connect the Power LED and HDD LED cables to the motherboard's front panel headers.

4.2 Powering On Your System

Once all components are installed and cables are connected, replace the side panels. Connect your monitor, keyboard, mouse, and power cable to the power supply. Press the power button on the top panel to start your system.

5. Mantentzea

5.1 Hautsa garbitzea

Regularly clean your PC case to prevent dust buildup, which can hinder airflow and component cooling. Use compressed air to clear dust from fans, radiators, and mesh panels. For external surfaces, use a soft, damp oihal.

5.2 Haizagailuen mantentze-lanak

Periodically check the fans for any obstructions or excessive noise. Ensure fan blades are clean and free from dust. If a fan becomes excessively noisy or stops working, consider replacing it.

6. Arazoak

• Sistemak ez du pizten: Double-check all power connections, including the 24-pin ATX, 8-pin CPU, and GPU power cables. Ensure the power supply switch is in the 'ON' position. Verify front panel power switch connection to the motherboard.
• Fans Not Spinning/Lighting Up: Ensure all fan power cables (including Molex for FRGB fans) are securely connected. Note that the FRGB fans have fixed colors and are not programmable.
• Berotze-arazoak: Verify that all fans are spinning correctly and are oriented to provide adequate airflow. Ensure CPU cooler and GPU fans are functioning. Check for dust buildup.
• Front Panel Ports Not Working: Confirm that the USB and HD Audio cables are correctly connected to the motherboard headers.

7. Zehaztapenak

8. Bermea eta Laguntza

For warranty information, please refer to the documentation provided by your retailer or visit the official Aerocool webgunea. Gorde erosketaren egiaztagiria bermearen erreklamazioetarako.

If you encounter any issues not covered in this manual, please contact Aerocool customer support or your point of purchase for assistance.

Aerocool Official Webgunea: www.aerocool.io