1. Sarrera
Thank you for choosing the FLYLINKTECH CF800 Portable Car Jump Starter. This device is designed to provide a reliable solution for jump-starting 12V vehicles, serving as a powerful portable power bank, and offering a multi-functional LED light. Please read this manual thoroughly before use to ensure safe and optimal operation.
Paketearen edukia:
- FLYLINKTECH CF800 Portable Car Jump Starter
- Smart Jumper Clamps
- Mikro USB kablea
- Erabiltzailearen eskuliburua
- EVA Hard Case
2. Segurtasun informazioa
Always observe the following safety precautions when using the jump starter to prevent electric shock, explosion, fire, or injury.
- Irakurri argibideak: Irakurri eta ulertu beti argibide guztiak gailua erabili aurretik.
- Begietako babesa: Wear safety glasses and protective clothing when working with batteries.
- Aireztapena: Ensure the area is well-ventilated during jump-starting.
- No Smoking/Sparks: Do not smoke or allow sparks or flames near the battery or engine.
- Mantendu lehorra: Do not expose the jump starter to rain or wet conditions.
- Haurrak: Mantendu gailua haurren eskura.
- Polaritate zuzena: Lotu jertsea clamps to the correct battery terminals (red to positive, black to negative). Reverse polarity can cause damage.
- Saihestu zirkuitu laburrak: Ez utzi cl gorria eta beltzaamps elkar ukitzeko.
- Tenperatura: Do not operate the device in extremely high or low temperatures outside the specified range.
- Gailu kaltetua: Do not use the jump starter if it is damaged, cracked, or leaking.

Image: Visual representation of the CF800's integrated safety protections, including short-circuit, reverse charge, reverse polarity, over-discharge, over-current, over-voltage, eta tenperatura altuko babesa.
3. Produktua amaitu daview
The FLYLINKTECH CF800 is a compact and powerful device designed for emergency vehicle starting and portable power needs.
Unitate Nagusiaren Ezaugarriak:
- Pizteko botoia: Activates the device and LED light.
- Bateriaren adierazle argiak: Show the remaining battery charge level.
- Abiarazteko ataka: Jumper adimendunera konektatzen daamps.
- USB irteerako atakak (x2): For charging electronic devices.
- C motako sarrerako ataka: For recharging the jump starter unit.
- LED linterna: Multi-mode light for illumination, strobe, and SOS.
Smart Jumper Clamps:
The included smart jumper clamps feature built-in protection mechanisms and a digital display for enhanced safety and ease of use.
- Alderantzizko polaritatearen babesa: Kalteak saihesten ditu kloroa badagoamps gaizki konektatuta daude.
- Gainkorrontearen babesa: Gehiegizko korronte-fluxuaren aurkako babes-neurriak.
- Gehiegizko bolumenatage Babesa: Bolumenaren aurka babesten dutagEtengabeak.
- Zirkuitu laburren babesa: Ustekabeko zirkuitulaburrak eragindako kalteak saihesten ditu.
- Bistaratze digitala: Provides real-time feedback on battery voltage and protection status.

Image: The complete FLYLINKTECH CF800 kit, showcasing the jump starter unit, smart jumper clamps, USB charging cable, and the protective EVA hard case.
4. Abiarazle elektrikoa kargatzea
Before first use, fully charge the FLYLINKTECH CF800. It is recommended to recharge the unit at least once every three months to maintain battery health, even when not in use.
Kargatzeko prozedura:
- Connect the provided Micro USB cable to the Type-C input port on the jump starter.
- Connect the other end of the USB cable to a 5V/2A or 9V/2A USB wall adapter (not included).
- The battery indicator lights will illuminate and flash during charging. All lights will be solid when fully charged.
A full charge typically takes several hours. Disconnect the charger once the unit is fully charged.

Image: The FLYLINKTECH CF800 unit connected to a power source for charging via its Type-C input, while simultaneously demonstrating its capability to charge external devices like a smartphone and tablet using its USB output ports.
5. Setup for Jump Starting
Before attempting to jump start a vehicle, ensure the jump starter is adequately charged (at least 75% recommended).
- Turn off the vehicle's ignition and all accessories (lights, radio, air conditioning).
- Engage the parking brake and place the vehicle in park (automatic) or neutral (manual).
- Ziurtatu ibilgailuaren bateriaren terminalak garbi eta korrosiorik gabe daudela.
6. Operating Instructions (Jump Starting)
The FLYLINKTECH CF800 is designed to jump start 12V vehicles with up to 10.0L gasoline engines or 9.0L diesel engines.

Image: The FLYLINKTECH CF800 jump starter unit positioned in a car's engine bay, with its smart clamps correctly connected to a vehicle battery, ready for jump-starting.
Urratsez urratseko gida:
- Konektatu Clamps to Jump Starter: Sartu jauzi-konexio adimendunaren entxufe urdina.amps firmly into the jump start port on the CF800 unit. Ensure a secure connection.
- Konektatu Clamps autoaren bateriara:
- Erantsi GORRIA (+) clamp to the vehicle's positive battery terminal.
- Erantsi BELTZA (-) clamp ibilgailuaren bateriaren terminal negatiboan.
Smart clamps' digital display will show the battery voltage and indicate if the connection is correct. If an error is displayed, check the connections.

Image: Close-up of the smart jumper clamps featuring a digital display that provides real-time feedback on battery status and active safety protections, such as low voltage, reverse polarity, reverse charge, short circuit, over-temperature, and over-voltage.
- Abiarazi ibilgailua: Behin clamps are correctly connected and the smart display shows a ready status, start the vehicle's engine.
- Kendu Clamps: As soon as the engine starts, immediately remove the smart jumper clamps from the car battery, first the black (-) clamp, orduan gorria (+) clamp. Then, disconnect the clamps from the jump starter unit.
If the vehicle does not start after the first attempt, wait at least 30 seconds before trying again. Do not attempt more than three consecutive jump starts.
7. Power Bank-aren funtzionalitatea
The FLYLINKTECH CF800 features a 20000mAh capacity and two USB output ports to charge your electronic devices.
- USB1 irteera: 5V/3A, 9V/2A (Quick Charge 3.0 compatible)
- USB2 irteera: 5V/2.4A
To Charge Devices:
- Connect your device's USB charging cable to one of the USB output ports on the CF800.
- The CF800 will automatically begin charging your device.
- Monitor the battery indicator lights on the CF800 to check its remaining charge.
8. LED Light Functions
The built-in LED flashlight offers multiple modes for various situations.

Image: The FLYLINKTECH CF800 jump starter held in hand, demonstrating its powerful LED flashlight in action, with icons illustrating its various modes: standard illumination, SOS signal, warning light, and strobe.
LED argiaren funtzionamendua:
- Piztu/Desaktibatu: Press and hold the power button for 3 seconds to turn the LED light on or off.
- Aldatu moduak: Once the light is on, short press the power button to cycle through the modes: Steady On (Torch) → Strobe → SOS → Off.
9. Mantentzea eta biltegiratzea
Proper maintenance ensures the longevity and readiness of your FLYLINKTECH CF800.
- Kargatu aldizka: Recharge the jump starter at least once every 3 months to prevent deep discharge and prolong battery life.
- Garbiketa: Garbitu unitatea zapi lehor eta leun batekin. Ez erabili produktu kimiko gogorrik edo garbitzaile urratzailerik.
- Biltegiratzea: Store the device in a cool, dry place, away from direct sunlight, moisture, and flammable materials.
- Tenperatura erresistentzia: The CF800 is designed to operate and be stored within a wide temperature range, typically from -20°C to 50°C.

Image: The FLYLINKTECH CF800 jump starter demonstrating its robust design and ability to withstand extreme temperatures, depicted in both a hot environment at 50°C and a cold environment at -20°C.
10. Arazoak
If you encounter issues with your FLYLINKTECH CF800, refer to the following common problems and solutions.
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Ibilgailua ez da martxan jartzen | Jump starter battery low; Incorrect clamp connection; Vehicle battery severely discharged; Engine issues. | Ziurtatu abiarazlea guztiz kargatuta dagoela. Egiaztatu klisazioaamp connections for correct polarity. Wait 30 seconds before reattempting. If still no start, vehicle may have other issues. |
| Smart clamps show error | Reverse polarity; Short circuit; Over-voltage; Low voltage. | Refer to the smart clamp display for the specific error code. Disconnect and reconnect clamps correctly. Ensure battery voltage onargarri den tartean dago. |
| Abiarazle elektrikoa ez da kargatzen | Charging cable faulty; Wall adapter insufficient; Charging port damaged. | Try a different USB cable and wall adapter. Ensure the adapter meets the specified output (5V/2A or 9V/2A). |
| USB irteerak ez ditu gailuak kargatzen | Jump starter battery low; Device cable faulty; Device not compatible. | Ensure jump starter has sufficient charge. Try a different USB cable or device. |
If the problem persists after trying these solutions, please contact FLYLINKTECH customer support.
11. Zehaztapenak
| Ezaugarri | Zehaztapena |
|---|---|
| Eredua | CF800 |
| Goiko Korronte | 3000A |
| Bateria Edukiera | 20000mAh |
| Hasi Voltage | 12V |
| Gas Engine Compatibility | Gehienez 10.0 l |
| Diesel Engine Compatibility | Gehienez 9.0 l |
| USB1 irteera | 5V/3A, 9V/2A (Quick Charge 3.0) |
| USB2 irteera | 5V/2.4A |
| C motako sarrera | 5V/2A, 9V/2A, 5V/3A |
| Neurriak (L x W x H) | 17.8 x 8.8 x 3.8 cm |
| Pisua | 700 g |
| Funtzionamendu-tenperatura | -20°C eta 50°C artean |
12. Bermea eta Laguntza
FLYLINKTECH provides a worry-free 12 hilabeteko bermea for the CF800 Portable Car Jump Starter, along with efficient bizitza osorako salmenta osteko zerbitzua.
If you have any questions, encounter problems during use, or require technical assistance, please contact FLYLINKTECH customer support. Our professional technical team is available to help resolve issues within 24 hours.
For support, please refer to the contact information provided with your purchase or visit the official FLYLINKTECH webgunea.





