1. Produktua amaitu daview
The BRESSER Beaufort 5-in-1 Wireless Weather Station Meteorological Center provides comprehensive weather data directly to your home. It includes an indoor display unit and a multi-sensor outdoor unit that measures temperature, humidity, wind speed, wind direction, and rainfall.

Image: The main display unit of the BRESSER Beaufort 5-in-1 Wireless Weather Station, showing indoor and outdoor temperature, humidity, wind data, forecast, barometric pressure, and time.
2. Konfigurazioa
2.1 Desontziratzea eta osagaien egiaztapena
Kontu handiz deskonprimitu osagai guztiak eta ziurtatu elementu hauek daudela:
- Bistaratzeko Unitate Nagusia
- 5-in-1 Outdoor Multi-Sensor Unit
- Mounting accessories (pole, base, screws)
- Power adapter for main unit
- Argibide eskuliburua
2.2 Bateriaren instalazioa
Pantaila-unitate nagusia: Insert 1x CR2032 battery (not included) into the battery compartment for backup power. Connect the main unit to a power outlet using the provided adapter.
Outdoor Multi-Sensor Unit: Insert 3x AA batteries (not included) into the battery compartment of the outdoor sensor. Ensure correct polarity.
2.3 Outdoor Sensor Placement and Mounting
Kanpoko sentsorearen kokapen egokia ezinbestekoa da irakurketa zehatzak lortzeko.
- Mount the sensor in an open area, away from obstructions like buildings or trees, to ensure accurate wind and rain measurements.
- Ensure the sensor is mounted level to guarantee accurate rainfall collection and wind direction.
- Orient the wind vane (the arrow) to point North during installation.
- Use the provided mounting pole and base to secure the sensor to a stable surface or pole.

Irudia: Albokoa view of the BRESSER 5-in-1 outdoor multi-sensor unit, showing the wind cups, wind vane, and rain collector.
2.4 Hasierako sinkronizazioa
After installing batteries in both units, place them within close proximity. The main display unit will automatically search for and connect to the outdoor sensor. This process may take a few minutes. Once connected, outdoor data will appear on the display.
2.5 Ordua eta data ezarpena
The weather station may attempt to synchronize time via RCC (Radio Controlled Clock) signal. If an RCC signal is not available in your region, or if you prefer, you can manually set the time and date using the buttons on the main display unit. Refer to the specific button functions in the Operating section for detailed instructions.
3. Eguraldi-estazioaren funtzionamendua
3.1 Bistaratuview
The main display unit presents various weather parameters:
- IRTEERA: Kanpoko tenperatura eta hezetasuna.
- IN: Barruko tenperatura eta hezetasuna.
- HAIZEA: Current wind speed and direction, including gust speed.
- IRAGARPENA: Weather forecast icons (sunny, cloudy, rainy, etc.).
- BARO: Barometric pressure readings.
- RAINFALL: Egunero, astero edo hileroko prezipitazio-metaketa.
- ORDUA / DATA: Current time, date, and day of the week.
- BEAUFORT: Beaufort scale indicator for wind force.
- HOZKETA EOLIZEA: Calculated wind chill temperature.

Irudia: Aurrealdea view of the BRESSER Beaufort 5-in-1 Wireless Weather Station display, highlighting the various data fields and their arrangement.
3.2 Botoien funtzioak
The display unit features several buttons for navigation and settings:
- HISTORIA: View historical data for various parameters.
- MAX / MIN: Display maximum and minimum recorded values for temperature, humidity, etc. Press again to clear.
- ARGIA: Adjust backlight brightness or activate temporary backlight.
- MODUA/EZARPENA: Enter settings mode or confirm selections.
- GORA/BEHERA geziak: Nabigatu menuetan zehar edo doitu balioak.
3.3 Alarmak ezartzea
You can set alarms for specific weather conditions, such as high/low temperature, high wind speed, or heavy rainfall. Enter the alarm setting mode using the MODE/SET button and follow the on-screen prompts to configure your desired alarm thresholds.
3.4 Unitatearen hautaketa
To change units (e.g., Celsius to Fahrenheit, mph to km/h, inHg to hPa), access the settings menu. Navigate to the unit selection option and choose your preferred measurement units.
4. Mantentzea
4.1 Bateria ordezkatzea
Replace batteries in the outdoor sensor when the low battery indicator appears on the main display. Due to the outdoor placement, ensure safe access for battery replacement. The main unit's backup battery should be replaced periodically, typically every 1-2 years.
4.2 Garbiketa
Periodically clean the outdoor sensor unit to ensure accurate readings. Remove any debris from the rain collector, wind cups, and wind vane. Use a soft, damp cloth for cleaning; avoid abrasive cleaners or solvents. Clean the display unit with a soft, dry cloth.
4.3 Arreta orokorra
Ensure the outdoor sensor is securely mounted and free from physical damage. Protect the main display unit from extreme temperatures, direct sunlight, and moisture.
5. Arazoak
- No Display on Main Unit: Check power adapter connection and backup battery.
- Kanpoko daturik ez: Ensure outdoor sensor batteries are fresh and correctly installed. Verify both units are within range and attempt re-synchronization (refer to setup instructions). Check for obstructions between units.
- Irakurketa okerrak: Ensure the outdoor sensor is mounted correctly (level, clear of obstructions, wind vane pointing North). Clean sensors if necessary.
- Ordua/Data okerra: If RCC synchronization fails, manually set the time and date.
6. Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Marka | BRESSER |
| Modelo zenbakia | 7002525 |
| ASIN | B08VDM1VB7 |
| Gomendatutako Erabilerak | Hasiera |
| Erabilera espezifikoak | Air humidity measurement, air pressure measurement, temperature alarm, temperature measurement, wind measurement, alarm clock |
| Energia iturria | Battery Powered (3 AA batteries required for outdoor sensor, 1 CR2032 for main unit backup) |
| Ezaugarri Berezia | Lightweight, Transparent |
| Materiala | Metala |
| Konektibitate Teknologia | 433 MHz edo 868 MHz |
| Produktuaren neurriak | 4.65"D x 7.17"W x 0.79"H (Main Unit) |
| Dakarten osagaiak | 1 product (Main Display Unit, 5-in-1 Outdoor Multi-Sensor Unit, mounting accessories, power adapter) |
| Tenperaturaren zehaztasuna | 1 or 2 Degrees Celsius |
| Sensor Teknologia | Ultrasonic or other compatible |
| Goiko Tenperaturaren Balorazioa | 50 gradu Celsius |
| Elementuaren pisua | 0.71 kilogramo (1.56 libra) |
| Bistaratzeko mota | LCD, LED or VFD |
| Akabera mota | Distiratsua |
| Forma | Laukizuzena |
| Eskuragarri dagoen lehen data | 16ko martxoaren 2023a |
7. Bermea eta Laguntza
For warranty information, please refer to the documentation included with your product packaging or visit the official BRESSER website. For technical support or assistance, please contact BRESSER customer service directly through their official channels.





