1. Sarrera
This manual provides detailed instructions for the safe installation, operation, and maintenance of your HOFTRONIC LED Luminaire 60cm IP65. This luminaire is designed for use in damp and dusty environments such as garages, basements, workshops, and offices, offering efficient and reliable lighting.
The HOFTRONIC LED Luminaire features a robust IP65 waterproof and dust-resistant design, energy-efficient LED technology, and a flicker-free driver for enhanced visual comfort. It operates at 18 Watts, providing 2520 lumens of 6000K cool white light.
2. Segurtasun-argibideak
- Segurtasun elektrikoa: Installation should only be performed by a qualified electrician or competent person in accordance with local electrical codes and regulations. Ensure the power supply is disconnected before any installation, maintenance, or repair work.
- liburukiatage: This luminaire operates on 100-240V AC. Verify that the supply voltage produktuaren zehaztapenekin bat dator.
- IP65 balorazioa: The IP65 rating ensures protection against dust ingress and low-pressure water jets. Do not submerge the luminaire in water. Ensure all seals and connections are properly secured to maintain the IP65 integrity.
- Tenperatura: Do not operate the luminaire outside its specified operating temperature range of -25°C to 50°C.
- Materialen bateragarritasuna: The luminaire is constructed from ABS and polycarbonate, materials resistant to chemical vapors. However, avoid exposure to highly corrosive substances that may compromise the housing integrity.
- Erregulagarria ez: This product is not dimmable. Do not connect it to dimming circuits.
3. Paketearen edukia
Instalazioarekin jarraitu aurretik, egiaztatu osagai guztiak daudela eta kalterik gabe daudela.
Image: Contents of the HOFTRONIC LED Luminaire package, showing the main IP65 fixture, two T8 LED tubes, four wall plugs, four mounting screws, and two stainless steel mounting brackets.
- 1x HOFTRONIC IP65 LED Fixture (Double 60cm)
- 2x HOFTRONIC LED T8 Tube Basic (140lm/W, 9W, 60cm, 6000K)
- 4x hormako tapoiak
- 4x Muntatzeko Torlojuak
- 2x Stainless Steel Mounting Brackets
- 1x LED Starter (included for easy retrofit)
4. Zehaztapenak
| Parametroa | Balioa |
|---|---|
| Marka | HOFTRONIC |
| Modelo zenbakia | 4407421 |
| Sarrera boltage | 100-240V AC |
| Energia-kontsumoa | 18 Watts (2 x 9W LED tubes) |
| Argi Fluxua | 2520 lumen |
| Kolore Tenperatura | 6000K (Zuri Hotza) |
| Kolore errendatze indizea (CRI) | > 80 Ra |
| Beam Angelua | 140° |
| Potentzia-faktorea | > 0.95 |
| Babes-balorazioa | IP65 (Iragazgaitza eta hautsarekiko erresistentea) |
| Eraginaren babesaren balorazioa | IK06 |
| Erregulagarria | Ez |
| Materiala | ABS, Polikarbonatoa |
| Neurriak (L x W x H) | 66.4 x 10.2 x 7.3 cm |
| Funtzionamendu-tenperatura | -25°C eta 50°C artean |
| Aldatzeko zikloak | 100,000 ziklo |
| Batez besteko Bizi-iraupena | 50,000 ordu |
| Ziurtagiriak | CE, EMC, RoHS, LM80, TÜV |
5. Konfigurazioa eta instalazioa
The HOFTRONIC LED Luminaire is designed for straightforward installation. It comes as a complete Plug and Play unit. Please ensure power is disconnected before beginning installation.
5.1 Gailua muntatzea
- Aukeratu kokapena: Select a suitable mounting location on a wall or ceiling, ensuring it is within the specified operating temperature range and away from direct heat sources.
- Markatu zulatzeko puntuak: Use the mounting brackets to mark the drilling points on the surface. Ensure the marks are level and correctly spaced for the luminaire.
- Zulatzeko zuloak: Zuloak egin markatutako puntuetan. Sartu emandako hormako takoak zuloetan.
- Erantsi euskarriak: Secure the stainless steel mounting brackets to the surface using the provided mounting screws.
- Mount Luminaire: Carefully attach the luminaire to the secured mounting brackets. Ensure it clicks securely into place.
Image: The HOFTRONIC LED Luminaire highlighting its IP65 water and dust resistance, suitable for various environments.
5.2 Konexio elektrikoa
- Deskonektatu energia: Ziurtatu instalazio-eremuko energia-hornidura nagusia etengailu magnetotermikoan itzalita dagoela.
- Sarbide kableatua: Open the wiring compartment of the luminaire.
- Konektatu kableak: Connect the live (L), neutral (N), and earth (PE) wires from your power supply to the corresponding terminals inside the luminaire. Ensure all connections are tight and secure.
- Secure Wiring Compartment: Close and securely fasten the wiring compartment cover to maintain the IP65 rating.
Image: Close-up of the HOFTRONIC LED Luminaire's G13 fitting, designed for T8 LED tubes, and illustrating its capability for in-series linking.
5.3 LED hodiak instalatzea
The luminaire is supplied with two HOFTRONIC LED T8 tubes and an LED starter.
- Txertatu LED abiarazteko tresna: Locate the starter socket within the luminaire. Insert the provided LED starter into the socket, twisting it to secure.
- Txertatu LED hodiak: Carefully insert each LED T8 tube into the G13 fittings on both ends of the luminaire. Rotate the tube slightly until it locks into place.
Image: The HOFTRONIC LED Starter, included for easy retrofitting of traditional tube light fixtures with LED tubes.
6. Funtzionamendu-argibideak
Once installed and connected, the HOFTRONIC LED Luminaire operates simply:
- Piztu: Restore power to the circuit. The luminaire will illuminate instantly.
- Argiaren irteera: The luminaire provides a consistent 6000K cool white light at 2520 lumens.
- Keinurik gabekoa: The integrated LED driver ensures flicker-free operation, reducing eye strain and fatigue.
Image: A HOFTRONIC LED tube, emphasizing its flicker-free LED driver technology for stable and comfortable illumination.
7. Mantentzea
The HOFTRONIC LED Luminaire requires minimal maintenance due to its durable construction and long-life LED components.
- Garbiketa: Periodically clean the exterior of the luminaire with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the polycarbonate housing. Ensure power is off before cleaning.
- Ikuskapena: Regularly inspect the luminaire for any signs of physical damage or loose connections. If damage is found, disconnect power and contact a qualified technician.
- Erabiltzaileak ez du zerbitzurik gabeko piezarik: There are no user-serviceable parts inside the luminaire. Attempting to open or modify the fixture will void the warranty and may pose a safety risk.
8. Arazoak
If you encounter issues with your HOFTRONIC LED Luminaire, refer to the following common problems and solutions:
- Luminaire does not turn on:
- Egiaztatu luminariaren energia-hornidura aktibo dagoen.
- Egiaztatu konexio elektriko guztiak ondo lotuta daudela eta behar bezala kableatuta daudela.
- Ensure the LED tubes are properly seated in their fittings and the LED starter is correctly inserted.
- Zirkuitu-etengailua egiaztatu ea zirkuitu jauzirik dagoen.
- Reduced light output or flickering:
- While the luminaire features a flicker-free driver, ensure stable input voltage.
- If one LED tube appears faulty, ensure it is correctly installed. If the issue persists, the tube may need replacement.
- Ura edo hautsa sartzea:
- Berehala deskonektatu korrontea.
- Inspect all seals and cable glands for proper seating and damage. Replace any compromised components.
- Ensure the wiring compartment cover is securely fastened.
If the problem persists after attempting these troubleshooting steps, please contact HOFTRONIC customer support or a qualified electrician.
9. Bermea eta Laguntza
HOFTRONIC stands behind the quality of its products. This LED Luminaire comes with a 5 urteko bermea erosketa-datatik aurrera.
Image: The HOFTRONIC LED Luminaire, emphasizing its 5-year extended warranty, superior build quality, and IK06 impact protection rating, indicating high-impact polycarbonate construction.
The product is certified with CE, EMC, RoHS, LM80, and TÜV, ensuring compliance with European safety, health, and environmental protection requirements.
For warranty claims, technical support, or further assistance, please refer to the contact information provided with your purchase or visit the official HOFTRONIC webgunea.
