1. Sarrera
The FLAMMA FC02 Mini Reverb Pedal is a compact digital guitar effects pedal designed to add rich, ambient reverb to your sound. It features three distinct reverb effects and intuitive controls, all housed in a durable metal casing. This manual provides essential information for setting up, operating, and maintaining your FC02 pedal.
Image 1.1: The FLAMMA FC02 Mini Reverb Pedal, showcasinbere diseinu trinkoa eta kontrol-diseinua esker.
2. Ezaugarriak
- Three Reverb Effects: Choose between Studio, Church, and Plate reverb types.
- Egiazko saihesbidea: Ensures your guitar signal remains unaltered when the pedal is disengaged.
- Diseinu trinkoa: Mini pedal size for efficient pedalboard space utilization.
- Eraikuntza iraunkorra: Metalezko c osoaasing with a frosted texture for longevity.
- Kontrol intuitiboak: DECAY, MIX, and TONE knobs for precise sound shaping.
Image 2.1: Visual representation of the three distinct reverb effects available on the FC02 pedal.
3. Kontrolak eta konexioak
Familiarize yourself with the pedal's controls and connection points:
Image 3.1: Detailed diagram of the FC02 pedal's controls and connection points.
- Oinen etengailua: Efektua aktibatzen edo desaktibatzen du.
- LED adierazlea: Efektua aktibo dagoenean pizten da.
- NAHASTU botoia: Adjusts the blend between the dry (unaffected) and wet (effected) signal.
- DECAY botoia: Controls the length or duration of the reverb tail.
- Sarrera Jack: 1/4 inch (6.35mm) mono audio input for your instrument.
- Reverb Type Switch: Selects between Studio, Church, and Plate reverb effects.
- Irteerako Jack: 1/4 inch (6.35mm) mono audio output to your ampbizigarria edo hurrengo pedala.
- TONU botoia: Adjusts the tonal character of the reverb effect.
- DC 9V sarrera: Power supply connection (center negative, 9V DC, minimum 210mA).
4. Konfigurazioa
- Potentzia-konexioa: Connect a 9V DC power adapter (center negative, minimum 210mA) to the DC 9V input jack. The power adapter is not included with the pedal.
- Tresnaren konexioa: Konektatu zure gitarra edo beste instrumentu bat Sarrera Jack using a 1/4 inch instrument cable.
- AmpLider Konexioa: Konektatu Irteera Jack zuregana amplifier or the input of the next pedal in your signal chain using a 1/4 inch instrument cable.
- Seinale-katearen kokapena: Reverb pedals are typically placed towards the end of your effects chain, after modulation and drive pedals, but before delay pedals if you prefer a distinct delay effect. Experiment with placement to find your preferred sound.
Image 4.1: The FC02 pedal connected in a typical guitar signal chain.
5. Funtzionamendu-argibideak
- Engaging/Disengaging the Effect: Press the footswitch to toggle the reverb effect on or off. The LED indicator will illuminate when the effect is active.
- Selecting Reverb Type: Use the 3-way toggle switch to select your desired reverb effect:
- Estudioa: A versatile room reverb effect.
- Eliza: A large, expansive reverb with a deep, natural response.
- Plaka: A classic plate reverb simulation.
Image 5.1: The reverb type selection switch.
- Adjusting DECAY: Biratu UGILKETA knob clockwise to increase the length of the reverb tail, and counter-clockwise to shorten it.
Image 5.2: Adjusting the DECAY knob.
- Adjusting MIX: Biratu NAHASTU knob to control the balance between your original guitar signal and the added reverb effect. A higher setting increases the reverb's prominence.
Image 5.3: Adjusting the MIX knob.
- Adjusting TONE: Erabili TONUA knob to shape the brightness or darkness of the reverb effect.
6. Mantentzea
- Garbiketa: Erabili zapi leun eta lehor bat pedalaren kanpoaldea garbitzeko. Saihestu garbitzaile edo disolbatzaile urratzaileak.
- Biltegiratzea: Gorde pedala leku lehor batean, muturreko tenperaturetatik eta eguzki-argitik babestuta.
- Kableen zainketa: Ensure all cables are in good condition and properly connected to prevent signal loss or damage.
- Elikatze-iturria: Always use a compatible 9V DC center-negative power supply to avoid damage to the unit.
7. Arazoak
- Soinurik ez:
- Egiaztatu kable guztien konexioak (sarrera, irteera, potentzia).
- Ensure the power supply is correctly connected and providing the specified 9V DC.
- Egiaztatu zure tresna eta amplifier-ak behar bezala funtzionatzen dute.
- Soinu ahula edo distortsionatua:
- Egiaztatu kablearen osotasuna.
- Ensure the power supply meets the minimum current requirement (210mA).
- Adjust the MIX and TONE knobs to ensure desired effect levels.
- Nahi gabeko zarata:
- Ensure you are using a regulated power supply.
- Check for ground loops if using multiple pedals.
- Ziurtatu kable guztiak babestuta daudela eta egoera onean daudela.
8. Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Eredua | FC02 |
| Eraginak | Studio, Church, Plate Reverb |
| Sarrera/Irteera | 1/4 inch (6.35mm) Mono Audio Jack |
| Potentzia-eskakizuna | 9V DC (center negative), minimum 210mA |
| Neurriak (L x W x H) | 3.27" x 1.85" x 2.05" (83 mm x 47 mm x 52 mm) |
| Pisua | 153 gramo (5.4 ontza) |
| Materiala | Metala |
| Seinalearen tratamendua | Digitala |
Image 8.1: Physical dimensions of the FC02 pedal.
9. Bermea eta Laguntza
For detailed warranty information, product support, or service inquiries, please refer to the official FLAMMA website or contact FLAMMA customer service directly.
