DaVinci Full-Size Conversion Kit M5589 for Kalani Crib and Changer Combo Instruction Manual

Sarrera

This manual provides comprehensive instructions for the assembly, use, and maintenance of your DaVinci Full-Size Conversion Kit M5589. This kit is specifically designed to convert your DaVinci Kalani Crib and Changer Combo (model M5582) into a full-size bed, extending the usability of your furniture as your child grows. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Segurtasun informazio garrantzitsua

• Always follow assembly instructions precisely. Incorrect assembly can lead to hazards.
• Ziurtatu hardware guztia ondo estututa dagoela erabili aurretik. Aldian-aldian egiaztatu eta berriro estutu hardwarea behar izanez gero.
• Do not substitute parts. Use only DaVinci authorized replacement parts.
• This conversion kit is intended for use with the DaVinci Kalani Crib and Changer Combo (model M5582) only. Using it with other models may compromise safety.
• A full-size bed mattress and box spring are required and sold separately. Ensure the mattress and box spring fit snugly within the bed frame to prevent entrapment.
• Mantendu pieza txikiak haurrengandik urrun muntatzean.

Paketearen edukia

Please verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, do not proceed with assembly. Contact customer support immediately.

Image: All components of the DaVinci Full-Size Conversion Kit M5589, including two long side rails, two shorter support rails, and two small wooden blocks.

• 2 x Full-Size Bed Rails (Long wooden pieces)
• 2 x Mattress Support Rails (Shorter wooden pieces with pre-drilled holes)
• 2 x Wooden Support Blocks
• Hardware Pack (Bolts, barrel nuts, screws, Allen wrench)

Konfigurazioa eta Muntaketa

Before you begin, ensure you have cleared a sufficient workspace and have the necessary tools (typically an Allen wrench, which is included, and possibly a Phillips head screwdriver, not included).

Step 1: Prepare the Crib and Changer Combo

Carefully disassemble your DaVinci Kalani Crib and Changer Combo (M5582). Remove the crib side rails and the mattress support. You will retain the headboard and footboard sections of the crib to form the ends of your full-size bed.

Step 2: Attach Full-Size Bed Rails

Align one of the long full-size bed rails with the pre-drilled holes on the headboard. Insert the appropriate bolts through the headboard and into the bed rail, securing them with barrel nuts. Do not fully tighten yet. Repeat this process for the other long bed rail on the footboard side. Ensure the bed rails are oriented correctly, with the mattress support ledges facing inward.

3. urratsa: Konektatu oheburua eta oin-ohea

Connect the remaining ends of the long full-size bed rails to the footboard and headboard respectively, using the same bolt and barrel nut method. Once all four connections are made, gently tighten all hardware. Avoid over-tightening.

Image: An illustration of the assembled full-size bed frame, showing the crib headboard and footboard connected by the conversion kit rails, alongside the changer combo. Dimensions are indicated.

Step 4: Install Mattress Support Rails

Place the two shorter mattress support rails across the width of the bed frame, resting them on the ledges of the long bed rails. These rails provide central support for your box spring. Secure them in place using the provided screws, attaching them to the long bed rails.

Step 5: Add Wooden Support Blocks

Position the two wooden support blocks centrally under the mattress support rails for additional stability. These blocks should rest on the floor and provide vertical support.

6. urratsa: Azken egiaztapenak

Ensure all bolts are snug and the frame is stable. Place your full-size box spring and mattress (sold separately) onto the assembled bed frame. The box spring and mattress should fit securely within the frame.

Funtzionamendu-argibideak

Once assembled, the DaVinci Full-Size Conversion Kit transforms your crib into a standard full-size bed. This bed is designed for sleeping and resting. Ensure that the mattress and box spring are properly placed and that the bed is stable before use.

• Pisu-gaitasuna: The bed is designed to support the weight of a standard full-size mattress, box spring, and occupant(s). Do not exceed reasonable weight limits.
• Lekua: Position the bed on a flat, level surface.
• Ohiko ikuskapena: Periodically inspect all connections and hardware to ensure they remain tight and secure.

Zainketa eta Mantentzea

• Garbiketa: Garbitu gainazalak leun batekin, damp cloth. Avoid abrasive cleaners or strong chemicals, as these can damage the finish.
• Hardwarea: Regularly check all bolts and screws to ensure they are tight. Loose hardware can compromise the safety and stability of the bed.
• Biltegiratzea: If disassembling for storage, keep all hardware in a sealed bag and store it with the wooden components in a dry, temperate environment.
• Egurraren zainketa: The product is made of New Zealand pine wood. Protect it from extreme temperature changes and direct sunlight to prevent warping or fading.

Arazoak konpontzea

Produktuaren zehaztapenak

• Eredua: M5589
• Compatible Crib: DaVinci Kalani Crib and Changer Combo (M5582)
• Materiala: 100% sustainable New Zealand pine wood
• Amaiera: Non-toxic multi-step painting process, lead and phthalate safe
• Assembled Dimensions (Approximate): 82.5" L x 54.25" W x 40" H (with Kalani headboard/footboard)
• Elementuaren pisua: Approximately 17.5 lbs (Conversion Kit only)
• Beharrezkoa den muntaia: Bai
• Mattress/Box Spring: Full-size mattress and box spring required (sold separately)

Irudia: Xehetasun handikoa view of the full-size bed frame with specific length and width measurements indicated.

Bermea eta Bezeroarentzako Arreta

DaVinci products are manufactured with quality and safety in mind. For specific warranty information, please refer to the warranty card included with your original DaVinci Kalani Crib and Changer Combo or visit the official DaVinci webgunea.

If you have any questions, require replacement parts, or need assistance with assembly, please contact DaVinci Customer Support:

• Webgunea: www.davincibaby.com
• Telefonoa: Refer to the DaVinci website or original product packaging for contact numbers.
• Posta elektronikoa: Refer to the DaVinci webbezeroarentzako arreta-posta elektronikorako gunea.

Please have your model number (M5589) and purchase date available when contacting support.