1. Sarrera
This manual provides detailed instructions for the installation, operation, and maintenance of your LogiLink BP0146 Dual Monitor Wall Mount. This product is designed to securely mount two flat or curved monitors ranging from 17 to 32 inches, offering flexible positioning through its integrated gas spring mechanism. Please read this manual thoroughly before installation and retain it for future reference.
2. Segurtasun informazioa
- Ensure the wall structure can support the combined weight of the mount and two monitors (up to 9 kg per arm).
- Ez gainditu beso bakoitzeko 9 kg-ko (19.8 lb) gehienezko pisu-ahalmena.
- Use appropriate mounting hardware for your specific wall type (wood stud, concrete, brick, etc.). Consult a professional if unsure.
- Mantendu haurrak eta maskotak urrun instalatzean.
- Tighten all screws firmly but do not overtighten to avoid stripping threads.
- Regularly check the mount for any signs of wear or loose connections.
3. Paketearen edukia
Instalazioarekin jarraitu aurretik, egiaztatu osagai guztiak daudela eta kalterik gabe daudela. Piezarik falta edo kaltetuta badago, jarri harremanetan zure saltzailearekin.
Image: Various components of the LogiLink BP0146 dual monitor wall mount.
Paketeak normalean barne hartzen ditu:
- Horma-plaka
- Gas Spring Monitor Arms (2 units)
- VESA Monitor Plates (2 units)
- Mounting Hardware Kit (screws, anchors, washers, Allen keys)
- Argibide eskuliburua
4. Instalazio gida
4.1. Beharrezko tresnak
- Arkatza
- Zulagailua
- Zutabeen bilatzailea (egurrezko habeen instalaziorako)
- Maila
- Phillips buru bihurkina
- Socket Wrench (if applicable for lag bolts)
4.2. Wall Preparation and Wall Plate Installation
- Determine the desired mounting height for your monitors.
- Locate wall studs if mounting to wood, or ensure the concrete/brick wall is suitable.
- Position the wall plate against the wall at the desired height and use a level to ensure it is straight. Mark the drill holes with a pencil.
- Drill pilot holes according to the marked positions and wall type.
- Secure the wall plate to the wall using the provided screws and anchors (if necessary).
4.3. Arm Assembly and Monitor Attachment
Image: Monitor attached to the VESA plate on the arm.
- Attach the gas spring arms to the wall plate. Ensure they are securely fastened.
- Attach the VESA monitor plates to the back of your monitors using the appropriate screws from the hardware kit. The mount supports VESA patterns 75x75 mm and 100x100 mm.
- Carefully lift each monitor and slide its VESA plate onto the corresponding arm's mounting head. Ensure the monitor is securely locked in place.
4.4. Kableen kudeaketa
Image: Integrated cable management on the monitor arm.
Route all monitor cables (power, video, etc.) through the integrated cable management channels on the arms. This helps maintain a tidy workspace and prevents cable damage.
5. Funtzionamendua eta doikuntza
Irudia: Albokoa view of the monitor arm extended.
5.1. Gas malgukiaren tentsioaren doikuntza
The gas spring mechanism allows for smooth vertical adjustment. If the monitor sags or floats, adjust the gas spring tension using the provided Allen key. Turn clockwise to increase tension for heavier monitors, and counter-clockwise to decrease tension for lighter monitors. Adjust until the monitor stays at the desired height.
5.2. Tilt, Swivel, and Rotation
Image: Monitor arms fully extended, illustrating flexibility.
- okertu: The monitor can be tilted from -45° to +90° to reduce glare and optimize viewangeluak.
- Birakaria: The arms allow for a swivel range of -90° to +90° at the wall plate and monitor connection points, enabling side-to-side movement.
- Errotazioa: The VESA plate allows for 360° rotation, enabling easy switching between landscape and portrait orientations.
- Luzapena: The arms can extend from the wall between 90 mm and 540 mm, providing ample depth adjustment.
6. Mantentzea
- Aldian-aldian egiaztatu torloju eta konexio guztiak ondo estututa daudela ziurtatzeko.
- Garbitu euskarria zapi leun eta lehor batekin. Saihestu garbitzaile edo disolbatzaile urratzaileak.
- Ez lubrifikatu gas malguki mekanismoa.
7. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Beherapenak edo jaitsierak kontrolatu | Gas malgukiaren tentsioa baxuegia da monitorearen pisurako. | Increase gas spring tension by turning the adjustment screw clockwise. |
| Monitorea gora flotatzen du | Gas malgukiaren tentsioa altuegia da monitorearen pisurako. | Decrease gas spring tension by turning the adjustment screw counter-clockwise. |
| Monitor is not level | VESA plate or arm connection is not perfectly aligned. | Adjust the leveling screw on the VESA plate or re-align the monitor on the arm. |
| Mendia ezegonkorra sentitzen da | Wall plate not securely fastened or wall structure is inadequate. | Re-check all wall plate screws. Ensure the wall can support the load. Consult a professional if needed. |
8. Zehaztapenak
- Eredua: BP0146
- Marka: LogiLink
- Kolorea: Beltza
- Materiala: Aluminioa
- Muntatze mota: Hormako Muntaia
- Number of Screens: 2
- Compatible Screen Size: 17 - 32 inches (flat and curved)
- Maximum Load Capacity per Arm: 9 kg (19.8 lb)
- VESA bateragarritasuna: 75x75 mm, 100x100 mm
- Wall Distance (Extension): 90 - 540 mm
- Inklinazio angelua: -45°-tik +90°-ra
- Angelu birakaria: -90°-tik +90°-ra
- Pantailaren biraketa: 360°
- Ezaugarri bereziak: Gas Spring Mechanism, Integrated Cable Management
- Jatorrizko herrialdea: Txina
9. Bermea eta Laguntza
For warranty information and technical support, please refer to the documentation provided with your purchase or contact your local LogiLink distributor or retailer. Keep your proof of purchase for warranty claims.
