Sarrera
This manual provides detailed instructions for the setup, operation, and maintenance of your SMARTRO Wireless Remote Sensor (Model SENSOR92). This sensor is designed to work with compatible SMARTRO indoor/outdoor thermometers, specifically models SC91 and SC62, to provide accurate temperature and humidity readings.
Important Note: This sensor is not compatible with SMARTRO models SC92, SC93, or SC31B.
Produktua amaituview
1. irudia: Aurrealdea view of the SMARTRO Wireless Remote Sensor, showing the digital display for temperature and humidity, channel indicator, and signal icon.
2. irudia: Atzekoa view of the sensor with the battery cover removed, illustrating the battery compartment, °C/°F selection button, TX button, and 1 to 3 channel switch. Also visible is the wall-mounting hole.
The SMARTRO Wireless Remote Sensor (SENSOR92) is a compact, battery-powered device designed to transmit outdoor or indoor environmental data to a compatible main unit. It features a digital display showing current temperature (in °C or °F) and humidity (%RH). The sensor is equipped with a wall-mount hole and a table stand for versatile placement.
Konfigurazioa eta Instalazioa
Bateriaren instalazioa:
- Open the battery compartment cover on the back of the sensor (refer to Figure 2).
- Insert two (2) AA batteries, ensuring correct polarity (+ and -). Batteries are not included.
- Itxi bateriaren konpartimenduaren estalkia ondo.
Kanalaren hautaketa:
- Locate the 1 to 3 Channel Switch inside the battery compartment (refer to Figure 2).
- Select a channel (1, 2, or 3) for the sensor. If you are using multiple sensors, ensure each sensor is set to a different channel.
Pairing with Main Unit:
- Place the sensor within close proximity to your SMARTRO main unit (e.g., SC91 or SC62).
- On the sensor, press the "TX" button (Transmit button) located inside the battery compartment (refer to Figure 2). This will send a signal to the main unit.
- Follow the pairing instructions for your specific SMARTRO main unit to establish a connection. The main unit should display the sensor's readings.
Lekua:
- The sensor can be placed on a flat surface using its integrated stand or mounted on a wall using the wall-mount hole.
- For outdoor use, choose a location that is protected from direct sunlight and heavy rain to ensure accuracy and longevity. The transmission range is up to 200ft/60m in an open area.
3. irudia: Example of outdoor sensor placement, demonstrating its wireless transmission capability to the main unit.
Funtzionamendu-argibideak
Tenperatura Unitatearen Hautaketa (°C/°F):
- To switch between Celsius (°C) and Fahrenheit (°F), open the battery compartment cover.
- Press the "°C/°F" selection button located inside the compartment (refer to Figure 2). The display will update accordingly.
Irakurketa pantaila:
- The sensor's digital display shows the current temperature and humidity readings.
- These readings are also transmitted wirelessly to your paired SMARTRO main unit.
Mantentzea
Bateria ordezkatzea:
- When the battery indicator on the sensor or main unit shows low power, replace both AA batteries promptly.
- Ensure proper polarity during installation.
Garbiketa:
- Wipe the sensor's exterior with a soft, damp oihal. Ez erabili garbitzaile urratzailerik eta ez sartu gailua uretan.
Ingurumena babestea:
- Keep the sensor away from direct sunlight and heavy rain to prevent damage and ensure accurate readings.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| No readings on main unit / Sensor display blank. |
|
|
| Tenperatura/hezetasun neurketa zehaztugabeak. |
|
|
| Main unit not receiving signal from sensor. |
|
|
Zehaztapenak
- Eredua: SENTSOREA92
- Bateragarritasuna: SMARTRO SC91, SC62 (Not compatible with SC92, SC93, SC31B)
- Energia iturria: 2 x AA pila (ez daude barne)
- Transmisio-eremua: Up to 200ft / 60m (open area)
- Kanalak: 3 kanal hautagarriak
- Tenperatura bistaratzea: °C / °F hautagarria
- Tenperatura-tolerantzia: +/- 5 ° F
- Hezetasun tolerantzia: +/- % 5 RH
- Materiala: Plastikoa
- Neurriak (gutxi gorabehera): 2.3 hazbete (luzera)
- Pisua (gutxi gorabehera): 2.46 ontza
- Konektibitate Teknologia: RF
- Bistaratzeko mota: Digitala
- Produktuen zainketa: Keep away from direct sunlight and rain.
Bermea eta Laguntza
SMARTRO products are designed for reliability and performance. For warranty information or technical support, please contact SMARTRO customer service. Details can often be found on the official SMARTRO webgunea edo zure erosketa plataformaren bidez.
Fabrikatzailea: SMARTRO
Posta elektronikoa: support@smartro.co
Please have your model number (SENSOR92) and purchase details ready when contacting support.
