aigo AZ300 Mid Tower Computer Case User Manual

1. Sarrera

Thank you for choosing the aigo AZ300 Mid Tower Computer Case. This manual provides detailed instructions for the installation, operation, and maintenance of your new computer case. Please read this manual thoroughly before beginning installation to ensure proper setup and safe use.

Figure 1: aigo AZ300 Mid Tower Computer Case (White)

2. Segurtasun informazioa

• Always disconnect the power supply from the wall outlet before installing or servicing any components inside the case.
• Kontuz erabili beira tenplatuzko panelak. Hauskorrak dira eta hautsi egin daitezke erortzen badira edo kolpeak jasaten badituzte.
• Avoid placing the case in areas with high humidity, extreme temperatures, or direct sunlight.
• Keep small parts and screws away from children.
• Ziurtatu lurrerako egokia den arrisku elektrikoak saihesteko.

3. Produktua amaitu daview

3.1 Aurreko S/I panela

Aurreko S/I panelak portu eta kontrol garrantzitsuetarako sarbide erosoa eskaintzen du.

Figure 2: Front I/O Panel Layout

• C motako ataka: 1x USB Type-C port for modern connectivity.
• USB 2.0 ataka: 1x USB 2.0 port for peripheral connections.
• USB 3.0 ataka: 1x USB 3.0 port for high-speed data transfer.
• HD Audio (Headset/Microphone): Separate jacks for audio output and microphone input.
• Reset/LED Button: Resets the system or controls LED lighting (if applicable).
• Pizteko botoia: Turns the computer on or off.

3.2 Internal Layout and Component Compatibility

The aigo AZ300 case offers a spacious interior designed for various component sizes and efficient cooling.

Figure 3: Internal Component and Cooling Layout

• Plakaren bateragarritasuna: Supports ATX, Micro-ATX, and ITX motherboards.
• Storage Drive Bays: 2x 2.5" SSD bays and 2x 3.5" HDD bays.
• GPUaren luzera: Maximum GPU length of 400mm.
• PSUaren luzera: Supports standard ATX power supplies up to 200mm.

4. Instalazio gida

4.1 Kasua prestatzea

1. Jarri zorroa gainazal lau eta egonkor batean.
2. Carefully remove the tempered glass side panels by unscrewing the thumb screws at each corner. Set the panels aside in a safe place.

Figure 4: Rear-Side View of Case

4.2 Plaka amaierako instalazioa

1. Install the I/O shield (if not pre-installed) into the rear opening of the case.
2. Align your ATX, Micro-ATX, or ITX motherboard with the standoffs inside the case. Ensure all standoffs match the motherboard's mounting holes.
3. Lotu plaka nagusia emandako torlojuekin.

Figure 5: Motherboard Mounting Areas

4.3 Energia hornitzeko unitatea (PSU) instalatzea

1. Locate the PSU mounting area at the bottom rear of the case.
2. Slide your ATX power supply into the designated slot.
3. Secure the PSU to the case with screws from the rear.

4.4 Biltegiratze unitatearen instalazioa

1. 2.5 hazbeteko SSDak: Mount SSDs to the dedicated 2.5" bays, typically located behind the motherboard tray or in specific drive cages.
2. 3.5 hazbeteko HDDak: Install HDDs into the 3.5" drive cages, usually found at the bottom front of the case.
3. Secure all drives with the appropriate screws.

Figure 6: Rear Internal View with Drive Bays

4.5 Expansion Card (GPU) Installation

1. Kendu beharrezko hedapen-zirrikituen estalkiak kaxaren atzealdetik.
2. Sartu zure grafiko-txartela edo beste hedapen-txartelak plaka baseko PCIe zirrikitu egokietan.
3. Txartelak torlojuekin finkatu.

4.6 Hozte-sistemaren instalazioa

The aigo AZ300 supports flexible cooling configurations.

• Zaleen laguntza: Multiple 120mm fan mounting points are available at the top, front, and rear.
• Erradiadorearen euskarria: Supports water coolers with radiators of 360mm, 240mm, and 120mm in designated areas.

4.7 Kableen kudeaketa

Erabili plaka basearen erretiluaren atzean dauden kableen bideratze-ebakidurak eta lotzeko puntuak kableak kudeatzeko, aire-fluxua eta estetika hobetzeko.

5. Funtzionamendua

After all components are installed and connected, reattach the tempered glass side panels. Connect your peripherals, monitor, and power cable. Press the power button on the front I/O panel to start your system.

Use the USB ports (Type-C, USB 2.0, USB 3.0) for connecting external devices. The HD Audio jacks are for headphones and microphones.

6. Mantentzea

Mantentze-lan erregularrak zure ordenagailuaren osagaien errendimendu optimoa eta iraupena bermatzen laguntzen du.

6.1 Hauts-iragazkiaren garbiketa

The aigo AZ300 case is equipped with dust filters to prevent dust buildup. Clean these filters periodically.

• Top Magnetic Dust Filter: Gently lift and remove the magnetic dust filter from the top panel. Clean it with compressed air or rinse with water (ensure it's completely dry before reattaching).
• PSU hauts-iragazkia: The dust filter for the power supply is located at the bottom of the case. Slide it out for cleaning.

Figure 7: Side Panel and Bottom Dust Filter Location

7. Arazoak

• Sistemak ez du pizten: Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected. Check that the power supply switch is in the 'ON' position. Verify front panel power button connection to the motherboard.
• Ez dago pantailarik: Confirm the monitor is connected to the graphics card (not the motherboard integrated graphics, unless no dedicated GPU is present). Reseat the graphics card and RAM modules.
• Gehiegizko berotzea: Ensure all case fans are spinning and oriented correctly for airflow (intake/exhaust). Clean dust filters and internal components. Verify CPU cooler installation.
• USB ports not working: Check that the USB headers from the front panel are correctly connected to the motherboard.

8. Zehaztapenak

9. Bermea eta Laguntza

aigo strives to provide excellent customer service. If you encounter any quality issues with your aigo AZ300 computer case, please contact us directly. We will assist you with troubleshooting and resolution.

For support, please refer to the contact information provided with your purchase or visit the official aigo webgunea.