DALY Smart BMS Li-ion 3S 12V 100A User Manual

1. Sarrera

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the DALY Smart Battery Management System (BMS) for Li-ion 3S 12V 100A battery packs. The DALY Smart BMS is designed to protect and manage lithium batteries, ensuring their safe and efficient operation. It features a programmable Bluetooth module for monitoring and parameter adjustment via a mobile application.

2. Segurtasun informazioa

Working with lithium batteries and Battery Management Systems requires careful attention to safety. Failure to follow these instructions can result in serious injury, property damage, or damage to the BMS and battery pack.

Instalazio profesionala gomendatzen da: Installation should be performed by qualified personnel with experience in battery systems and electrical wiring.
Arrisku elektrikoa: Battery packs can store significant energy. Always disconnect the battery pack from any loads or chargers before working on the BMS.
Zirkuitulaburreko prebentzioa: Ensure all wiring is correctly insulated and connections are secure to prevent short circuits.
Polaritate zuzena: Double-check all positive and negative connections before applying power. Incorrect polarity can severely damage the BMS and battery.
Aireztapena: Ensure adequate ventilation around the battery pack and BMS, especially for models with cooling fans.
Tenperatura: Operate the BMS and battery within specified temperature ranges. Avoid extreme heat or cold.
Ura eta hezetasuna: Keep the BMS and battery away from water and high humidity to prevent electrical hazards and damage.

3. Produktuaren ezaugarriak

The DALY Smart BMS offers advanced features for comprehensive battery management:

Korronte handiko euskarria: Supports up to 100A continuous discharge and 50A charge current, suitable for demanding applications.
Programmable Protection: Features programmable temperature, over-charge, over-discharge, and over-current protection limits.
liburukiatage Balancing: liburukia barnetage balancing to maintain cell health and extend battery lifespan.
Bluetooth konexioa: Integrated Bluetooth module for wireless monitoring and parameter adjustment via iOS and Android mobile applications.
SOC Calculation: Precise State of Charge (SOC) calculation with automatic learning function.
Common Port Design: Utilizes a common port for both charging and discharging.
Hozte haizagailua: Equipped with a cooling fan for enhanced thermal management during high current operation.

4. Produktua amaitu daview

The DALY Smart BMS is a compact and robust unit designed for efficient battery management.

DALY Smart BMS with labeled ports for NTC, UART, Bluetooth, CAN/RS485, Key switch, and Soft switch.

Figure 1: DALY Smart BMS with labeled functional interfaces including NTC, UART, Bluetooth, CAN/RS485, Key switch, and Soft switch.

Diagram illustrating 12 protection functions of the DALY BMS.

2 Irudia: Gainetikview of the 12 protection functions integrated into the DALY Smart BMS, including over-charge, over-discharge, over-current, short-circuit, over-voltage, balance function, NTC temperature protection, waterproof, moistureproof, fireproof, and dustproof features.

Lehertuta view of the DALY Smart BMS showing internal components like heatsinks, high current board, BMS PCBA, and thermal gel.

3. Irudia: Lehertuta view detailing the internal structure of the DALY Smart BMS, highlighting components such as the two-wheel style heatsinks, wave style heatsink, high current board with thick copper port, BMS PCBA, thermally conductive silica gel, and pure aluminum heatsink.

5. Paketearen edukia

Egiaztatu elementu guztiak paketean daudela:

Smart BMS Unit (1)
Balance Wires (1 set)
Bluetooth Module (1)
UART Cable (for PC connection) (1)
English Version Wiring Manual (1)

Image showing the contents of the DALY Smart BMS package, including the BMS unit, balance wires, Bluetooth module, and UART cable.

Figure 4: Typical package contents for the DALY Smart BMS.

6. Instalazioa eta kableatzea

Proper wiring is critical for the safe and correct operation of the BMS. Refer to the wiring diagram and follow these steps carefully.

Beharrezko tresnak:

Soldering machine (recommended 662 °F/350°C)
Guraizeak
Alde bikoitzeko zinta
Tin wire
Multimetroa

Kableatu urratsak:

Prepare Battery Pack: Ensure your Li-ion 3S 12V battery pack is assembled and cells are balanced.
Konektatu oreka-kableak: Carefully connect the balance wires to each cell in the correct sequence, starting from the negative terminal (B-) of the first cell.
Konektatu elikatze-kable nagusiak: Connect the main negative (B-) and positive (P+) wires from the battery pack to the corresponding terminals on the BMS.
Connect Load/Charger: Connect your load and charger to the common port (P-) of the BMS.
Connect BMS Balance Port: GARRANTZITSUA: Before connecting the balance wires to the BMS connection port, ensure the white end of the balance wires is disconnected from the BMS. Only after all black and red main wires are welded to the battery pack, connect the balance wires to the BMS port.
Activate BMS: Plug in the NTC temperature sensor and Bluetooth module. Press the button on the Bluetooth module to activate the Smart BMS.
Egiaztatu konexioak: Erabili multimetroa bolumena neurtzekotage between adjacent balance cables. This voltage should be approximately the nominal voltage of a single cell string.

Oharra: Keep the BMS red cooling surface side uncovered to ensure proper heat dissipation. Use DALY matching balance wires (regular length 450 mm / 17.72 inch).

Detailed wiring diagram for DALY Smart BMS connection to a battery pack, motor, and charger.

Figure 5: Wiring diagram for connecting the DALY Smart BMS to a battery pack, motor, and charger. Ensure correct polarity and sequence for balance wires.

7. Operating Instructions (Bluetooth App & PC Software)

The DALY Smart BMS can be monitored and configured using a mobile application or PC software via Bluetooth or UART connection.

7.1 Mobile App Setup and Usage:

Deskargatu aplikazioa: Bilatu "Smart BMS" in the Huawei App Store or Apple App Store and download the application.
Connect to BMS: Open the Smart BMS APP and connect to the corresponding Bluetooth device name (e.g., DL-XXXXXXXX).
Hasierako konfigurazioa: For the first power-on, the battery capacity must be set to the actual capacity of your battery pack. The initial password for parameter settings is 123456. Failure to set the correct capacity will result in inaccurate SOC readings.
Monitorearen parametroak: The app displays real-time battery parameters such as total voltage, uneko bolumena, zelula bakoitzarenatages, temperature, and SOC.
Doitu ezarpenak: Navigate to the "Parameter Settings" section to adjust protection thresholds for over-charge, over-discharge, over-current, and temperature.
Kalibrazio automatikoa: The BMS automatically calibrates when the battery is charged until the voltage reaches a high level 2 alarm.

Screenshots of the Smart BMS mobile application showing real-time data monitoring and parameter settings.

Figure 6: Smart BMS mobile application interface for monitoring battery data and adjusting parameters.

7.2 PC Software Usage:

Connect the BMS to a computer using the provided UART cable. Open the host computer software to view detailed battery status and configure advanced parameters. The PC software provides a comprehensive interface for data logging and fine-tuning BMS settings.

7.3 Instructional Video:

Video 1: An official DALY video demonstrating the connection process and basic operation of the Smart BMS with the mobile application, including viewing battery parameters and initial setup.

8. Mantentzea

Regular maintenance helps ensure the longevity and optimal performance of your DALY Smart BMS and battery pack.

Ohiko jarraipena: Periodically check battery parameters via the mobile app or PC software to identify any anomalies early.
Garbitasuna: Keep the BMS unit clean and free from dust and debris, especially around the cooling fan and heatsinks, to ensure efficient heat dissipation.
Konexioaren Osotasuna: Periodically inspect all wiring connections for tightness and corrosion. Loose connections can lead to resistance, heat buildup, and performance issues.
Firmware eguneraketak: Check the DALY website or app for any available firmware updates for your BMS model.

9. Arazoak

This section addresses common issues you might encounter with your DALY Smart BMS.

Arazoa	Kausa posiblea	Irtenbidea
BMS not activating / no power output	Bluetooth module button not pressed; incorrect wiring; battery voltage baxuegia.	Press the button on the Bluetooth module. Verify all wiring connections, especially B- and P+. Check battery voltage; if too low, charge the battery.
Bluetooth aplikazioa ez da konektatzen	Bluetooth module not activated; out of range; app issues.	Ensure the Bluetooth module button is pressed. Move closer to the BMS. Restart the app or phone. Check app permissions.
Inaccurate SOC reading	Incorrect battery capacity set in app; BMS not calibrated.	Set the correct battery capacity in the app (initial password: 123456). Fully charge the battery to allow the BMS to calibrate.
BMS shuts down randomly	Protection triggered (over-current, over-voltage, bolumen azpikoatage, temperature); loose connection.	Check app for fault messages. Identify and resolve the cause of the protection trigger. Inspect all connections. Reset the BMS by disconnecting and reconnecting the main power.
Cells not balancing effectively	Significant cell mismatch; low balance current.	Ensure cells are closely matched before assembly. Allow sufficient time for balancing, especially during charging. For severe imbalances, external balancing may be required.

10. Zehaztapenak

Key technical specifications for the DALY Smart BMS Li-ion 3S 12V 100A:

Produktuaren neurriak: 7.24 x 2.56 x 1.3 hazbete
Elementuaren pisua: 1.5 kilo
Marka: DALY
Konektibitate Teknologia: Bluetootha
Energia iturria: Bateriaren bidez
Haririk gabeko komunikazio estandarra: Bluetootha
Gailu bateragarriak: Telefono mugikorrak
Deskarga-korrontea: Up to 100A continuous
Karga-korrontea: Up to 50A continuous
Over-discharge Current: 150A ± 15A (Can be set)
Overcharge Current: 150A ± 15A (Can be set)
Gehiegizko karga Voltage: 4.25V ± 0.05V (any string, can be set)
Gehiegizko deskarga Voltage: 2.7V ± 0.1V (any string, can be set)
Karga Voltage: 12.6V (Can be set)

Diagram showing fan specifications and overall dimensions of the DALY Smart BMS.

Figure 7: Fan specifications and physical dimensions of the DALY Smart BMS.

11. Bermea eta Laguntza

For warranty information, technical support, or assistance with your DALY Smart BMS, please contact the seller, DalyElec, directly through your purchase platform. Ensure you have your product model and purchase details available when contacting support.

	Daly Smart BMS 8-16S 100-200A Product Specification Approval and Manual Detailed product specification and user manual for the Daly Smart BMS 8-16S 100-200A, covering technical parameters, protection features, LED indicators, communication protocols, and installation instructions.
	DALY Y Series BMS Technical Specifications and Wiring Guide Detailed technical specifications, wiring diagrams, and interface descriptions for DALY Y Series Battery Management Systems (BMS), including models YH, YK, and YM. Covers cell counts from 4S to 24S and current ratings up to 200A, with information on the Smart BMS mobile application.
	DALY DL-R32U-F012S200ATJ-MM00-S4RV LiFePO4 BMS Technical Specifications Detailed technical specifications, wiring diagrams, and warranty information for the DALY DL-R32U-F012S200ATJ-MM00-S4RV LiFePO4 12S 36V 200A Battery Management System (BMS) with Balance, UART, and Bluetooth.
	DALY Battery Management System (BMS) User Manual Comprehensive user manual for the DALY Battery Management System (BMS) with Bluetooth module. Includes information on package contents, safety instructions, connection diagram, activation, and declaration of conformity.
	DALY LiFePO4 8S24V200A BMS 4G eta GNSSrekin - Datu-orria DALY LiFePO4 8S24V200A Bateriaren Kudeaketa Sistemaren (BMS) fitxa teknikoa, 4G konexioa, GNSS, UART eta NTC tenperatura-sentsoreak dituena. Zehaztapenak, pin-out-a eta LED egoeraren informazioa barne hartzen ditu.

DALY 100A FAN Li-ion 3S 12V BT