Segotep Lux-S Mid-Tower Gaming PC Case Instruction Manual

1. Sarrera

Thank you for choosing the Segotep Lux-S Mid-Tower Gaming PC Case. This manual provides essential information for the proper assembly, installation, and maintenance of your new PC case. Please read these instructions carefully before beginning the installation process to ensure optimal performance and longevity of your components.

2. Segurtasun informazioa

• Deskonektatu beti korronte-iturria hormako entxufetik edozein osagai instalatu edo kendu aurretik.
• Handle all components with care to prevent damage from static electricity. Consider using an anti-static wrist strap.
• Be cautious of sharp edges inside the case.
• Keep small parts and screws away from children.
• Ensure proper ventilation around the assembled PC to prevent overheating.

3. Paketearen edukia

Mesedez, egiaztatu elementu guztiak zure paketean daudela:

• Segotep Lux-S Mid-Tower PC Case
• 3 x 120mm Front Fans (pre-installed)
• Osagarrien kutxa (torlojuak, euskarri-euskarriak, kable-bridak, etab. dituena)
• Erabiltzailearen eskuliburua (dokumentu hau)

4. Produktua amaitu daview

The Segotep Lux-S is a stylish mid-tower gaming case featuring a full crystal-style design and transparent tempered glass side panels for showcasing your build. It is designed for efficient airflow and easy component installation.

Ezaugarri nagusiak:

• Plaka amaren euskarria: Compatible with ATX, Micro-ATX, and ITX motherboards.
• Hoztea: Includes three pre-installed 120mm front fans. Supports additional fans and air cooling solutions.
• Hautsaren iragazketa: Equipped with a magnetic anti-dust mesh on the top panel.
• Biltegiratzea: Supports two 3.5" HDDs or one 3.5" HDD and one 2.5" SSD.
• Alboko panelak: Tempered glass side panels for an aesthetic view barne osagaien.

4.1. irudia: Aurrealdea view of the Segotep Lux-S PC Case, highlighting the RGB fans and tempered glass panel.

4.2. irudia: Goitik behera view of the case, illustrating the magnetic dust filter on the top panel and the front I/O ports.

Figure 4.3: Interior layout of the Segotep Lux-S, detailing the motherboard mounting area, cable routing cutouts, and drive bay locations.

5. Konfigurazioa eta instalazioa

5.1 Alboko panelak kentzea

Carefully remove the tempered glass side panel(s) by unscrewing the thumb screws located at the rear of the case. Place the panels on a soft, flat surface to prevent scratches.

5.2 Plaka amaierako instalazioa

1. Install the I/O shield that came with your motherboard into the rear opening of the case.
2. Align your ATX, Micro-ATX, or ITX motherboard with the pre-installed standoffs. Ensure the standoffs match your motherboard's form factor.
3. Lotu plaka nagusia osagarrien kaxako torloju egokiak erabiliz.

5.3 Energia hornitzeko unitatea (PSU) instalatzea

Install your PSU into the dedicated compartment at the bottom rear of the case. Secure it with screws from the accessory box.

5.4 Biltegiratze unitatearen instalazioa

• 3.5 hazbeteko HDDak: Locate the drive cage at the bottom of the case. Slide the HDDs into the trays and secure them with screws. The case supports up to two 3.5" HDDs.
• 2.5 hazbeteko SSDak: SSDs can be mounted on designated brackets, typically behind the motherboard tray or within the HDD cage. Secure with screws. The case supports one 2.5" SSD if one 3.5" HDD is used.

5.5 Txartel grafikoa eta hedapen txartelak

Remove the necessary PCIe slot covers at the rear of the case. Insert your graphics card or other expansion cards into the motherboard's PCIe slots and secure them with screws.

5.6 Kableen kudeaketa

Erabili plaka basearen atzean dauden kableen bideratze-ebakiak eta lotzeko puntuak kableak kudeatzeko. Horrek aire-fluxua eta estetika hobetzen ditu.

5.7 Connecting Front I/O and Fan Cables

Connect the front panel cables (USB, audio, power switch, reset switch, LED indicators) to the corresponding headers on your motherboard. Connect the pre-installed 120mm front fans to your motherboard's fan headers or a fan controller, if applicable.

6. Funtzionamendu-argibideak

After all components are securely installed and cables are connected, replace the side panels. Connect your monitor, keyboard, mouse, and power cable. Press the power button on the front panel to start your computer.

6.1. irudia: hurbileko planoa view of the three 120mm RGB fans pre-installed at the front of the Segotep Lux-S case.

Fan and Lighting Control:

The pre-installed fans may have RGB lighting. Depending on your motherboard and fan connections, you may be able to control the fan speed and lighting effects through your motherboard's software or a dedicated controller (if included or purchased separately).

7. Mantentzea

• Hauts-iragazkiaren garbiketa: The top panel features a magnetic dust filter. Regularly remove and clean it with water or a soft brush to maintain optimal airflow and prevent dust buildup inside the case.
• Garbiketa orokorra: Erabili biguna, damp cloth to clean the exterior of the case. Avoid abrasive cleaners or solvents that could damage the finish or tempered glass.
• Barneko hautsaren kentzea: Periodically open the case and use compressed air to remove dust from internal components, especially heatsinks and fans.

8. Arazoak

8.1 Computer Does Not Power On

• Ziurtatu elikatze-kablea ondo konektatuta dagoela bai elikatze-iturrira bai hormako entxufera.
• Check that the PSU switch is in the 'ON' position.
• Egiaztatu aurrealdeko paneleko etengailuaren kablea plaka baseko goiburura behar bezala konektatuta dagoela.
• Confirm all internal power cables (24-pin ATX, 8-pin CPU, PCIe power) are properly seated.

8.2 Haizagailuak ez dira biratzen / RGB ez da pizten

• Check that fan power cables are securely connected to the motherboard or fan controller.
• Ensure RGB cables (if separate) are connected to the appropriate RGB headers on the motherboard or controller.
• Consult your motherboard manual for proper fan and RGB header connections and software control.

8.3 Gehiegi berotzearen arazoak

• Ziurtatu kaxa-haizagailu guztiak behar bezala funtzionatzen dutela eta aire-fluxu optimoa lortzeko orientatuta daudela (sarrera/irteera).
• Garbitu hauts-iragazkiak eta barneko osagaiak aldizka.
• Verify that CPU cooler and GPU fans are functioning properly.

9. Zehaztapenak

10. Bermea eta Laguntza

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Segotep webgunea. Gorde erosketaren egiaztagiria bermearen erreklamazioetarako.

If you encounter any issues not covered in this manual, please contact Segotep customer support for assistance.