Commax DP-2S / DR-201D Intercom Panel with Audio Handset User Manual

1. Sarrera

This manual provides detailed instructions for the installation, operation, and maintenance of your Commax DP-2S Audio Handset (indoor unit) and DR-201D Intercom Panel (outdoor unit). Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. Keep this manual for future reference.

2. Segurtasun informazioa

Observe the following safety precautions to prevent damage to the product or injury to users:

• Ensure power is disconnected before performing any installation or maintenance.
• Do not expose the units to water, high humidity, or extreme temperatures.
• Ez saiatu unitateak zeuk irekitzen edo konpontzen. Mantendu konponketa guztiak langile kualifikatuen esku.
• Use only specified wiring and components for installation.
• Mantendu produktua eremu magnetiko indartsuetatik urrun.

3. Paketearen edukia

Egiaztatu elementu guztiak paketean daudela:

• Commax DP-2S Audio Handset (Indoor Unit)
• Commax DR-201D Intercom Panel (Outdoor Unit)
• Muntatzeko Torlojuak eta Aingurak
• Erabiltzailearen eskuliburua (dokumentu hau)

3.1. irudia: Commax DP-2S Audio Handset (left) and DR-201D Intercom Panel (right). The indoor unit features a white casing with a telephone-style handset and a call button. The outdoor unit is a rectangular panel with a speaker grille, microphone, and a call button.

4. Konfigurazioa eta instalazioa

Proper installation is crucial for optimal performance. It is recommended that installation be performed by a qualified technician.

4.1. Kableatu diagrama (orokorra)

The Commax DP-2S and DR-201D typically use a 2-wire connection for audio and power. Ensure correct polarity and secure connections. Refer to the specific wiring diagram provided with your product packaging for detailed instructions, as variations may exist.

• 1. haria: Audio/Power (+)
• 2. haria: Ground/Power (-)

Oharra: For longer cable runs, use thicker gauge wire to minimize signal loss.

4.2. Outdoor Unit (DR-201D) Installation

1. Aukeratu kokapena: Select a suitable location near the entrance, protected from direct rain and sunlight if possible, at a height convenient for visitors.
2. Muntaketa:
   • Kontu handiz ireki kanpoko unitatea casing to access the mounting holes.
   • Mark the drilling points on the wall using the unit as a template.
   • Beharrezkoa bada, zuloak egin eta hormako aingurak sartu.
   • Secure the outdoor unit to the wall using the provided screws.
3. Kableatua: Connect the 2-wire cable from the indoor unit to the designated terminals on the outdoor unit. Ensure connections are tight and insulated.
4. Itxi Casing: Securely close the outdoor unit casing.

4.1. irudia: Gertutik view of the Commax DR-201D Intercom Panel. This unit is designed for outdoor installation, featuring a speaker grille, a small microphone opening, and a call button for visitors to initiate communication with the indoor unit.

4.3. Indoor Unit (DP-2S) Installation

1. Aukeratu kokapena: Install the indoor unit in a convenient location within the building, typically near the main entrance or in a central area.
2. Muntaketa:
   • Markatu zulatzeko puntuak horman.
   • Zulatu zuloak eta sartu hormako aingurak.
   • Lotu muntatzeko euskarria (bereiz badago) edo unitatea zuzenean horman.
3. Kableatua: Connect the 2-wire cable from the outdoor unit to the designated terminals on the indoor unit. Ensure correct polarity.
4. Potentzia-konexioa: Connect the power adapter (if external) or ensure the unit is connected to the building's power supply as per local electrical codes.
5. Azken kokapena: Place the handset onto the base unit.

5. Funtzionamendu-argibideak

5.1. Dei bat jasotzea

1. When a visitor presses the call button on the DR-201D outdoor unit, the DP-2S indoor unit will ring.
2. Lift the handset of the DP-2S indoor unit to answer the call.
3. Speak into the handset to communicate with the visitor.
4. To end the call, place the handset back onto the base unit.

5.2. Making a Call (from Indoor Unit)

The Commax DP-2S / DR-201D system is primarily designed for visitors to initiate calls from the outdoor unit to the indoor unit. The DP-2S indoor unit typically does not have a function to initiate a call to the outdoor unit.

5.3. Bolumenaren doikuntza

The DP-2S indoor unit may feature a volume control switch or dial, usually located on the side or bottom of the handset base. Adjust to a comfortable listening level during a call.

6. Mantentzea

Regular maintenance ensures optimal performance and extends the product's lifespan.

• Garbiketa: Use a soft, dry cloth to clean the surfaces of both units. Do not use abrasive cleaners, solvents, or harsh chemicals.
• Ikuskapena: Periodically check wiring connections for looseness or damage. Ensure the outdoor unit is free from debris that might obstruct the speaker or microphone.
• Ingurumena babestea: While the outdoor unit is designed for outdoor use, protecting it from extreme weather conditions (e.g., heavy rain, direct prolonged sunlight) can prolong its life.

7. Arazoak

Arazoak badituzu, jo ezazu honako arazo eta irtenbide ohikoenei:

Irtenbide hauek saiatu ondoren arazoa konpontzen ez bada, jarri harremanetan bezeroarentzako arreta-zerbitzuarekin edo teknikari kualifikatu batekin.

8. Zehaztapenak

9. Bermea eta Laguntza

Commax products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your purchase or visit the official Commax website. For technical support, service, or replacement parts, please contact your local Commax distributor or authorized service center. Provide your product model number (DP-2S / DR-201D) and purchase details when seeking support.

Webgunea: www.commax.com