Sarrera
Thank you for choosing the Lepro 5m RGB LED Strip Light. This product is designed to provide versatile and vibrant lighting for various indoor applications. Featuring high-brightness SMD5050 LEDs, a wide range of colors, and easy installation, it enhances the ambiance of any space. Please read this manual carefully before installation and use to ensure proper operation and safety.
Kutxan dagoena
Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela:
- LED Strip Light (5 meters) x 1
- DC12V Power Adapter x 1
- Connection Receiver x 1
- Urruneko kontrola x 1
- Instruction Manual (Japanese) x 1
Segurtasun Informazioa
- Produktu hauentzat diseinatuta dago barruko erabilera soilik. Do not expose to water or high humidity.
- Ziurtatu elikadura hornidura deskonektatuta dagoela instalazioa edo mantentze-lanak egin aurretik.
- Use only the provided DC12V power adapter. Using an incompatible power supply may damage the product or pose a fire hazard.
- Do not bend the LED strip sharply or apply excessive force, as this may damage the circuit.
- Mantendu haurren eskura.
- If any part of the product is damaged, discontinue use immediately and contact support.
Konfigurazioa
Jarraitu urrats hauek zure LED tira behar bezala instalatzeko:
- Prestatu gainazala: Clean the desired installation surface thoroughly. Ensure it is dry, smooth, and free of dust or oil for optimal adhesive performance.
- Neurtu eta moztu (aukerakoa): If a shorter length is required, cut the LED strip along the designated cut marks (indicated by a scissor icon) using scissors. Oharra: Only cut at these specific marks. Cutting elsewhere will damage the strip. Cut sections cannot be reconnected without additional connectors (sold separately).
- Aplikatu tira: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
- Konektatu osagaiak: Connect the LED strip to the connection receiver, ensuring the arrows on both components align. Then, connect the DC12V power adapter to the receiver.
- Piztu: Plug the power adapter into a suitable power outlet. Remove the insulation sheet from the remote control before first use. Point the remote control towards the receiver and press the power button to turn on the lights.
Funtzionamendu-argibideak
The LED strip light is controlled using the included 44-key remote control. Ensure the remote is pointed towards the receiver for effective operation.
Urruneko kontrolaren funtzioak:
- Piztu/Itzali: Sakatu pizteko botoia gorria argiak piztu edo itzaltzeko.
- Distira doitzea: Erabili gora eta behera gezi-botoiak (labeled 'Brightness Adjust') to increase or decrease the light intensity.
- Kolore aukeraketa: Aukeratu Aurrez ezarritako 20 kolore by pressing the corresponding color buttons.
- DIY moduak: The DIY1-DIY6 buttons allow you to create and save custom colors by adjusting the Red, Green, and Blue intensity using the RGB arrow buttons.
- Modu dinamikoak:
- AZKAR/MANTSO: Adjust the speed of dynamic modes.
- AUTOA: Cycles through all dynamic modes automatically.
- FLASH: Koloreen artean keinuka egiten du.
- JUMP3/JUMP7: Jumps between 3 or 7 colors.
- FADE3/FADE7: Fades between 3 or 7 colors.
Mantentzea
- Garbiketa: Ensure the power is off and unplugged before cleaning. Gently wipe the LED strip with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
- Biltegiratzea: If storing the strip for an extended period, ensure it is clean and dry. Roll it loosely to prevent damage to the LEDs or circuit. Store in a cool, dry place away from direct sunlight.
- Itsasgarriaren zaintza: The 3M adhesive is strong, but repeated removal and reapplication may reduce its effectiveness.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| LED tira ez da pizten. | 1. Power adapter not plugged in. 2. Remote control insulation sheet not removed. 3. Connections are loose or incorrect. 4. Remote control battery is dead. | 1. Ensure power adapter is securely plugged into an outlet. 2. Remove the clear plastic insulation sheet from the remote control battery compartment. 3. Check all connections, ensuring arrows align between the strip and receiver. 4. Replace the remote control battery (CR2025 or equivalent). |
| Urrutiko agintea ez da erantzuten. | 1. Remote not pointed at receiver. 2. Obstruction between remote and receiver. 3. Remote control battery is dead. | 1. Point the remote directly at the receiver. 2. Remove any objects blocking the line of sight. 3. Ordezkatu urrutiko agintearen bateria. |
| Some sections of the strip are not lighting up. | 1. Damage to the LED strip. 2. Incorrect cutting. | 1. Inspect the strip for physical damage. If damaged, contact support. 2. Ensure cuts were made only at designated marks. |
Zehaztapenak
- Modelo zenbakia: PR410082-RGB-JP
- Marka: Leproa
- Argi iturri mota: LED (SMD5050)
- LED kantitatea: 150 LED (metro bakoitzeko 30 LED)
- Bandaren luzera: 5 metro
- Energia-kontsumoa: 18W
- Sarrera boltage: DC12V 1.5A
- Kolore aukerak: RGB (20 preset colors + DIY modes)
- Kontrol-metodoa: 44-key IR Remote Control
- Barruan/Kanpoan erabilera: Barruan
- Ezaugarri bereziak: Dimmable, Cuttable, 3M Adhesive, PSE Certified
- Paketearen tamaina: 13.1 x 10.7 x 6.7 cm; 230 g
Bermea eta Laguntza
Lepro LED banda honek honako hauekin dator: 2 urteko bermea. If you encounter any issues or have questions regarding the product, please contact Lepro JP customer support through the retailer's platform. Provide your order details and a description of the issue for prompt assistance.
For further assistance, you can visit the official Lepro store on Amazon: Lepro Amazon denda
