XTOOL TP150 TPMS Berriz ikasteko tresnaren erabiltzailearen eskuliburua

1. Sarrera

The XTOOL TP150 is a professional Tire Pressure Monitoring System (TPMS) tool designed for comprehensive TPMS service. It supports activation, relearning, programming of XTOOL sensors, and diagnostic functions for TPMS systems. This manual provides detailed instructions for the proper use and maintenance of your TP150 device.

2. Segurtasun informazioa

Always observe the following safety precautions when operating the TP150 tool:

• Irakurri arretaz argibide guztiak erabili aurretik.
• Do not operate the tool in wet conditions or near flammable liquids/gases.
• Ensure the vehicle's ignition is off before connecting or disconnecting the OBDII cable.
• Use only the accessories and parts specified by XTOOL.
• Mantendu tresna haurrengandik urrun.
• Properly dispose of old TPMS sensors and batteries according to local regulations.

3. Produktua amaitu daview

The XTOOL TP150 TPMS tool is a handheld device equipped with a user-friendly interface. It comes with two 315/433MHz dual-frequency sensors for programming.

Image: The XTOOL TP150 device, two XTOOL TPMS sensors, and their protective yellow carrying case.

3.1. Ezaugarri nagusiak

• TPMS Activation: Activates all known OE and aftermarket TPMS sensors.
• TPMS Relearn: Supports OBD Relearn and Static Relearn for all sensors.
• TPMS Programming: Programs XTOOL 315/433MHz sensors with four methods: Automatic ID Generation, Manual ID Entry, Copy ID by Activating, and Read ECU Copy ID.
• TPMS Diagnosis: Reads and clears TPMS Diagnostic Trouble Codes (DTCs), resets TPMS warning light.
• Denbora errealeko datuen bistaratzea: Shows sensor ID, tire pressure, temperature, and sensor voltage.
• OE Sensor Information Check: Displays brand, part number, and frequency of OE sensors.

4. Konfigurazioa

4.1. Hasierako gailuaren konfigurazioa

1. Desegin: Carefully remove the TP150 tool and accessories from the packaging.
2. Piztu: Sakatu pizteko botoia gailua pizteko.
3. Software eguneratzea: It is highly recommended to update the device software to the latest version before first use. Connect the device to a computer with internet access and follow the update instructions provided on the XTOOL official website or through the device's update menu. (Note: Some functionalities may not work correctly without the latest software.)

4.2. Ibilgailura konektatzea

1. Kokatu ibilgailuaren OBDII ataka, normalean gidariaren aldeko aginte-panelean.
2. Ziurtatu ibilgailuaren piztea OFF posizioan dagoela.
3. Connect the OBDII cable from the TP150 tool to the vehicle's OBDII port.
4. Turn the vehicle's ignition to the ON position (engine off). The TP150 will power on automatically via the OBDII connection.

5. Funtzionamendu-argibideak

The TP150 offers various functions accessible from the main menu. Navigate using the directional buttons and confirm selections with the OK button.

5.1. Activating TPMS Sensors

1. Menu nagusitik, hautatu "TPMS" or "Activate".
2. Aukeratu ibilgailuaren marka, modeloa eta urtea.
3. Hautatu "Activate Sensor".
4. Hold the TP150 tool near each tire's valve stem and press the activation button.
5. The tool will display sensor information (ID, pressure, temperature, voltage) upon successful activation.

5.2. TPMS Relearn Procedures

Relearning is required when new sensors are installed, tires are rotated, or the ECU is replaced.

1. Menu nagusitik, hautatu "TPMS", orduan "Relearn".
2. Select the vehicle make, model, and year.
3. Choose the appropriate relearn method:
• OBD Relearn: Connect the TP150 to the vehicle's OBDII port. Follow on-screen instructions to transfer new sensor IDs to the vehicle's ECU.
• Static Relearn: Follow the specific vehicle manufacturer's procedure, often involving a sequence of actions (e.g., turning ignition on/off, pressing brake pedal). The TP150 will guide you through the process.
4. Confirm successful relearn on the device screen and check the vehicle's dashboard for the TPMS warning light status.

5.3. Programming XTOOL Sensors

The TP150 can program XTOOL 315/433MHz sensors only. This is useful for replacing faulty sensors.

1. Menu nagusitik, hautatu "TPMS", orduan "Program Sensor".
2. Place the XTOOL sensor to be programmed near the TP150's antenna.
3. Choose one of the following programming methods:
• Automatic ID Generation: The tool generates a new, unique sensor ID.
• Enter ID Manually: Input a specific sensor ID if known.
• Copy ID by Activating: Activate an existing sensor to copy its ID to the new XTOOL sensor.
• Read ECU Copy ID: Read sensor IDs directly from the vehicle's ECU via the OBDII port and copy them to new XTOOL sensors.
4. Follow the on-screen prompts to complete the programming.

5.4. Diagnosing TPMS System

1. Connect the TP150 to the vehicle's OBDII port.
2. Menu nagusitik, hautatu "TPMS", orduan "Diagnose".
3. The tool will scan the TPMS system for Diagnostic Trouble Codes (DTCs).
4. Review the displayed DTCs to identify system faults.
5. After repairs, select "Clear DTCs" to erase the codes and reset the TPMS warning light.

6. Mantentzea

• Garbiketa: Garbitu gailua leun batekin, damp oihal. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
• Biltegiratzea: Store the TP150 in its protective case in a dry, cool environment when not in use.
• Software eguneraketak: Regularly check for and install software updates to ensure optimal performance and compatibility with new vehicle models and sensors.
• Bateria zaintzea: If the device has an internal battery, avoid fully discharging it for extended periods. Charge it periodically if stored for a long time.

7. Arazoak

8. Zehaztapenak

9. Bermea eta Laguntza

9.1. Bermearen informazioa

XTOOL products typically come with a limited warranty covering defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official XTOOL website for detailed warranty terms and conditions, including duration and coverage specifics.

9.2. Laguntza Teknikoa

For technical assistance, software updates, or any inquiries regarding your XTOOL TP150, please contact XTOOL customer support through their official channels:

• Ofiziala Webgunea: www.xtooltech.com (Check for support contact details, FAQs, and software downloads)
• Posta elektronikoko laguntza: Kontaktu atala kontsultatu webgune ofizialean. webgunea.
• Sareko baliabideak: Many helpful guides and videos may be available on the XTOOL webwebgunean edo haien sare sozial ofizialetan.

When contacting support, please have your product model (XT-TP150) and serial number ready.