1. Sarrera
Eskerrik asko erosketagatik.asing the Bytech BYMCMS101X2 Motion Sensor Night Light 2-Pack. This device is designed to provide convenient, automatic illumination in various indoor and outdoor settings. Featuring motion-sensing technology and a magnetic mount, these battery-operated night lights offer flexible placement and energy-efficient lighting.
Figure 1: Bytech BYMCMS101X2 Motion Sensor Night Light 2-Pack (Packaging View)
This image displays the retail packaging for the Bytech BYMCMS101X2 Motion Sensor Night Light, showing two circular white night lights. Key features such as 'Up to 10ft Motion Sensing Range', 'Motion Sensor', 'Ultra Bright Light', 'Battery Operated', and 'Magnetic Mount' are highlighted on the packaging.
2. Paketearen edukia
Mesedez, egiaztatu paketea elementu hauek dituen:
- 2 x Bytech Motion Sensor Night Lights
- 2 x Magnetic Mounting Plates (pre-attached or separate)
- Erabiltzailearen eskuliburua (dokumentu hau)
Oharra: Bateriak ez daude barne eta aparte erosi behar dira.
3. Zehaztapenak
| Ezaugarri | Deskribapena |
|---|---|
| Marka | Bytech |
| Eredua | BYMCMS101X2 |
| Kolorea | Zuria |
| Energia iturria | Bateriaz funtzionatzen du (bateriak ez daude barne) |
| Maximum Motion Sensing Range | Gehienez 5 oin (gutxi gorabehera 1.5 metro) |
| Muntatze Mota | Wall Mount, Magnetic Mount |
| Produktuaren neurriak | 5"S x 5"Z x 5"A (gutxi gorabehera 12.7cm x 12.7cm x 12.7cm) |
| Elementuaren pisua | libra 1 (gutxi gorabehera 0.45 kg) |
| UPC | 805112078202 |
4. Konfigurazioa
4.1 Bateriaren instalazioa
- Locate the battery compartment cover on the back of the night light.
- Ireki estalkia marken arabera biratuz edo irristatuz.
- Insert the required batteries (e.g., AAA or AA, refer to the compartment markings for correct type and polarity). Ensure correct polarity (+/-).
- Itxi bateriaren konpartimenduaren estalkia ondo.
4.2 Gaueko argia muntatzea
The Bytech Motion Sensor Night Light offers versatile mounting options:
- Muntaia magnetikoa: The night light features a built-in magnet. Simply attach it to any metallic surface. For non-metallic surfaces, use the included magnetic mounting plate. Peel off the adhesive backing from the plate and firmly press it onto a clean, dry surface. Then, attach the night light to the magnetic plate.
- Hormako muntaia: If the magnetic plate is not suitable, the night light may have keyhole slots for screw mounting. (Screws and anchors typically not included).
2. irudia: Aldea View of Night Light (Illustrative)
Irudi honek alboko profesional bat erakusten dufile of the Bytech Motion Sensor Night Light, highlighting its compact design and the area where a magnetic mount or wall mount could be attached. The sensor lens is visible on the front face.
Gomendatutako kokapena: For optimal performance, place the night light in areas where motion detection is desired, such as hallways, stairwells, closets, bathrooms, or entryways. Avoid placing it near heat sources, direct sunlight, or in areas with high humidity.
5. Funtzionamendu-argibideak
The Bytech Motion Sensor Night Light is designed for automatic operation:
- Aktibazio automatikoa: Once batteries are installed and the night light is placed, it will automatically detect motion within its sensing range (up to 5 feet) in low-light conditions.
- Argia piztuta: When motion is detected in a dark environment, the night light will illuminate.
- Argia itzalita: The light will automatically turn off after a short period (typically 15-30 seconds) if no further motion is detected.
- Eguneko sentsorea: The integrated daylight sensor prevents the light from activating during daytime or in brightly lit areas, conserving battery life.
6. Mantentzea
6.1 Garbiketa
To clean the night light, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water.
6.2 Bateria ordezkatzea
When the light output diminishes or the night light stops functioning, it is time to replace the batteries. Follow the battery installation steps outlined in Section 4.1.
7. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Argia ez da pizten. | 1. Bateriak agortuta edo gaizki instalatuta daude. 2. Inguruko argia oso bizia da. 3. Ez da mugimendurik detektatu eremuan. | 1. Ordeztu bateriak, polaritate zuzena ziurtatuz. 2. Test in a darker environment. 3. Ensure motion occurs within 5 feet of the sensor. |
| Argia etengabe piztuta mantentzen da. | 1. Continuous motion within sensing range. 2. Sensor obstruction or malfunction. | 1. Relocate the night light to an area with less constant activity. 2. Clean the sensor lens. If problem persists, contact support. |
| Motion sensor range is poor. | 1. Obstructions blocking the sensor. 2. Incorrect placement. | 1. Ensure a clear line of sight to the detection area. 2. Reposition the night light for optimal coverage. |
8. Segurtasun informazioa
- Ez nahastu bateria zaharrak eta berriak, edo bateria mota desberdinak.
- Kendu bateriak gailua denbora luzez erabiliko ez bada.
- Bota ezazu erabilitako bateriak arduraz tokiko araudiaren arabera.
- This product is intended for indoor use or sheltered outdoor areas. Avoid direct exposure to water or extreme weather conditions.
- Do not attempt to disassemble or modify the night light. This will void the warranty and may cause damage or injury.
- Mantendu haurren eta maskoten eskura.
9. Bermea eta Laguntza
Bytech products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official Bytech website. Please have your model number (BYMCMS101X2) and proof of purchase ready when contacting support.
For further assistance, you may visit www.bytechintl.com (adibample link, verify actual webgunea).
