Aigostar Retro Desk Lamp Erabiltzailearen eskuliburua

1. Sarrera

Thank you for choosing the Aigostar Retro Desk LampEskuliburu honek zure l berriaren erabilera seguru eta eraginkorrerako ezinbesteko informazioa ematen du.ampMesedez, irakurri arretaz argibide hauek muntatu eta erabili aurretik, eta gorde itzazu etorkizunean erreferentzia gisa.

Figure 1: Aigostar Retro Desk Lamp erabileran.

2. Paketearen edukia

Ensure all components are present and undamaged before proceeding with assembly. If any parts are missing or damaged, please contact customer support.

• Lamp Oinarria
• Adjustable Wooden Arm Assembly
• Lamp Shade with E27 Socket
• Power Cord with On/Off Switch
• Erabiltzailearen eskuliburua

Note: The light bulb is not included and must be purchased separately.

3. Konfiguratzeko argibideak

The Aigostar Retro Desk Lamp is designed for tool-free setup. Follow these steps to assemble your lamp:

1. Deskonprimitu osagaiak: Kontu handiz kendu pieza guztiak ontzitik.
2. Jarri oinarria: Kokatu lamp base on a stable, flat surface.
3. Lotu besoaren multzoa: The wooden arm assembly is pre-attached to the base and lamp head. Ensure all joints are securely tightened.
4. Instalatu Bonbilla: Screw an E27 base bulb (maximum 40W) into the lamp entxufea. Ez estutu gehiegi.
5. Konektatu energia: Entxufatu korronte-kablea entxufe elektriko egoki batean.

Figure 2: Tool-free setup for quick assembly.

3 Irudia: Gainetikview l.koaamp osagaiak.

4. irudia: Lamp dimensions and bulb specifications.

4. Funtzionamendu-argibideak

Your Aigostar Retro Desk Lamp is designed for ease of use and flexibility.

4.1 Piztu/Itzaltzea

Locate the convenience button (switch) on the power cord. Press the switch to turn the lamp piztu edo itzali.

4.2 Adjusting the Lamp Besoa

Lamp features a swivel hinge arm and multiple adjustable joints, allowing you to direct light precisely where needed. Gently loosen the wing nuts at the joints, adjust the arm to your desired position, and then tighten the wing nuts to secure it.

• Lamp head can rotate up to 210 degrees.
• The upper arm can adjust by 60 degrees.
• The lower arm can adjust by 15 degrees.

Figure 5: Demonstrating the adjustable design of the lamp.

Figure 6: Specific adjustment angles for optimal light positioning.

5. Mantentzea

5.1 Garbiketa

l garbitzekoamp, ensure it is unplugged from the power outlet. Use a soft, dry cloth to wipe down the surfaces. Do not use abrasive cleaners or solvents, as these may damage the finish.

5.2 Bonbilla ordezkatzea

Before replacing the bulb, always unplug the lamp and allow the old bulb to cool completely. Unscrew the old E27 bulb and screw in a new E27 bulb, ensuring it does not exceed 40W. Refer to Figure 4 for bulb specifications.

6. Arazoak

• Lamp ez du pizten:
  • Egiaztatu elikatze-kablea ondo konektatuta dagoen hormako entxufean.
  • Ensure the bulb is correctly screwed into the socket and is not burnt out.
  • Verify that the on/off switch on the power cord is in the 'on' position.
• Argi-distirak:
  • Estutu bonbilla entxufean.
  • Bonbilla akastun bat baztertzeko, saiatu bonbilla desberdin batekin.
• Lamp arm is loose:
  • Tighten the wing nuts at the adjustable joints to secure the arm in place.

7. Zehaztapenak

8. Bermea eta Laguntza

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Aigostar customer service directly. Keep your purchase receipt as proof of purchase.