PowerA Wireless Controller for Nintendo Switch - Dungeon Jump Mario User Manual

Sarrera

This manual provides essential instructions for setting up, operating, and maintaining your PowerA Enhanced Wireless Controller for Nintendo Switch, featuring the Dungeon Jump Mario design. Please read this manual thoroughly before use to ensure optimal performance and longevity of your controller.

Kutxan dagoena

• PowerA Enhanced Wireless Controller (Dungeon Jump Mario)
• 10 ft (3m) USB-C Charge Cable
• Erabiltzailearen eskuliburua (dokumentu hau)

Produktua amaituview

Familiarize yourself with the various components of your PowerA Wireless Controller.

Image 1: Controller Features Diagram. This image displays the PowerA Enhanced Wireless Controller from a top-down perspective, highlighting key features such as anti-friction rings, low battery indicator LED, USB-C charge port, program button, and advanced gaming buttons.

2. irudia: Aurrealdea View. Aurrealde zuzena. view of the PowerA Enhanced Wireless Controller, showcasing the Dungeon Jump Mario design, joysticks, D-pad, and face buttons.

Konfigurazioa

1. Kontrolatzailea kargatzea

The controller comes with a built-in rechargeable lithium-ion battery. Before first use, fully charge the controller.

1. Connect the small end of the included 10 ft (3m) USB-C charge cable to the USB-C port on the top of the controller.
2. Connect the other end of the cable to a USB port on your Nintendo Switch dock or a USB wall charger (not included).
3. The LED indicator on the front of the controller will illuminate to show charging status. It will turn off when fully charged.

Image 3: Charging Port. This image shows the top of the controller with the USB-C charging cable inserted into the port.

2. Nintendo Switch-ekin parekatzea

Follow these steps to pair your wireless controller with your Nintendo Switch console:

1. Ziurtatu zure Nintendo Switch kontsola piztuta dagoela eta sistemaren azken bertsiora eguneratuta dagoela.
2. HOME Menuan, hautatu Kontrolatzaileak, orduan Aldatu heldulekua/ordena.
3. While on the Change Grip/Order screen, press and hold the SYNC botoia on the back of the PowerA controller for at least three seconds. The Player LED(s) will begin to flash.
4. Once paired, the Player LED(s) will remain solid, indicating the controller is connected.
5. Sakatu Botoi bat to confirm and exit the menu.

Note: The controller will automatically reconnect to your Switch console when powered on and within range, provided it was previously paired.

Image 4: Sync Button Location. This image shows the rear of the controller, indicating the position of the small circular Sync button.

Funtzionamendu-argibideak

Jokoetarako botoi aurreratuak

The controller features two mappable Advanced Gaming Buttons (AGB) on the back, allowing for on-the-fly button assignments.

1. Sakatu Programaren botoia on the back of the controller. The Program LED will flash, indicating the controller is in programming mode.
2. Press the button you wish to map (A/B/X/Y, L/R, ZL/ZR, Left Stick Press, Right Stick Press, D-pad). The Program LED will flash rapidly.
3. Press the Advanced Gaming Button (AGB L or AGB R) you wish to assign. The Program LED will stop flashing, indicating the button has been successfully mapped.
4. To clear a mapped button, press the Program Button and then the AGB you wish to clear. The Program LED will turn off.

Image 5: Advanced Gaming Buttons. This diagram highlights the location of the Program Button and the two Advanced Gaming Buttons on the underside of the controller.

Mugimendu-kontrolak

This controller supports motion controls for compatible Nintendo Switch games. The internal gyroscope allows for intuitive tilt-based gameplay.

Bateria baxuaren abisua

When the controller's battery is low, the Low Battery Warning LED indicator on the front of the controller will flash. Connect the USB-C charge cable to recharge the controller.

Image 6: Player Indicator LEDs. This image shows the bottom front edge of the controller, where the four Player Indicator LEDs are located, which also serve as the low battery warning.

Mantentzea

• Garbiketa: Erabili zapi leun eta lehor bat kontrolatzailea garbitzeko. Saihestu produktu kimiko gogorrak edo material urratzaileak erabiltzea.
• Biltegiratzea: Gorde kontrolatzailea leku fresko eta lehor batean, eguzki-argitik eta muturreko tenperaturetatik babestuta.
• Bateria zaintzea: Bateriaren iraupena luzatzeko, saihestu kontrolagailua maiz erabat deskargatzea. Kargatu aldizka, etengabe erabiltzen ez baduzu ere.
• Kableen zainketa: Handle the USB-C charge cable carefully. Avoid bending or twisting it excessively.

Arazoak konpontzea

Controller not pairing or connecting:

• Ziurtatu kontrolagailua kargatuta dagoela.
• Verify the Nintendo Switch console is updated to the latest system version.
• Repeat the pairing process as described in the "Pairing with Nintendo Switch" section.
• Move closer to the Nintendo Switch console to ensure you are within Bluetooth range.
• Saiatu zure Nintendo Switch kontsola berrabiarazten.

Botoiek edo joystick-ek ez dute erantzuten:

• Ziurtatu kontrolatzailea behar bezala konektatuta eta kargatuta dagoela.
• Test the controller in a different game or in the Switch's controller calibration settings.
• If issues persist, contact PowerA support.

Battery not holding a charge:

• Ensure the USB-C cable is securely connected to both the controller and a power source.
• Saiatu beste USB ataka edo hormako egokitzaile batekin.
• The internal battery has a limited lifespan. If the controller is old, battery degradation may occur.

Muga garrantzitsuak:

This controller does EZ support HD rumble, IR (Infrared), or Amiibo NFC functionality. These features are exclusive to official Nintendo Joy-Con controllers and some Nintendo Pro Controllers.

Zehaztapenak

Bermea eta Laguntza

PowerA backs all products with a two-year limited warranty. For warranty claims, technical assistance, or further support, please visit the official PowerA support webgunea:

PowerA laguntza

Gorde erosketaren egiaztagiria berme-zerbitzurako.