1. Sarrera
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Lock'er Down LD2012EX EXxtreme Console Safe. This product is designed to provide secure storage within the center console of 2005-2015 Toyota Tacoma vehicles. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Produktua amaitu daview
The Lock'er Down LD2012EX EXxtreme Console Safe is a heavy-duty security vault constructed from domestic 12-gauge cold-rolled steel, featuring an additional 10-gauge steel plate on the door for enhanced pry resistance. It integrates seamlessly into your vehicle's center console, utilizing factory bolt holes for a secure, immovable installation. The safe is equipped with a 4-digit combination lock for convenient access and security.
2.1 irudia: Goitik behera view of the Lock'er Down LD2012EX EXxtreme Console Safe, showing the combination lock and robust construction.
2.2 irudia: Gertuko planoa view of the 4-digit combination lock mechanism on the console safe.
Ezaugarri nagusiak:
- Materiala: Domestic 12-gauge cold-rolled steel with 10-gauge steel door plate.
- Blokeo mota: 4-digit combination lock.
- Bateragarritasuna: Specifically designed for 2005-2015 Toyota Tacoma models.
- Segurtasuna: Pry-resistant design, secured to vehicle's factory console bolt holes.
- Amaiera: Durable black powder coat.
- Bisagra: Spring-assisted door hinge for smooth operation.
3. Segurtasun informazioa
- Always ensure the safe is properly installed and secured before driving.
- Do not store hazardous materials or illegal items in the safe.
- Keep the combination code confidential and in a secure location, separate from the vehicle.
- Exercise caution when opening and closing the safe door to avoid pinching fingers.
4. Paketearen edukia
Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela:
- Lock'er Down LD2012EX EXxtreme Console Safe
- Muntatzeko hardwarea (torlojuak, arandelak, azkoinak behar izanez gero)
- Instalazio argibideak (eskuliburu hau)
5. Konfigurazioa eta instalazioa
Installation of the Lock'er Down console safe is designed to be straightforward, utilizing existing factory console bolt holes. No drilling is typically required.
Beharrezko tresnak:
- Socket giltza multzoa
- Screwdriver (Phillips or flathead, depending on console fasteners)
Instalazio urratsak:
- Ibilgailua prestatu: Open your vehicle's center console lid. Remove any existing console liner or tray to expose the console's interior base.
- Sarbide Muntaketa Puntuak: Locate the factory bolt holes at the bottom of the console. You may need to remove existing bolts or fasteners that secure the console to the vehicle's floor.
- Position the Safe: Carefully place the Lock'er Down console safe into the center console opening. Ensure it sits flush and aligns with the factory mounting holes.
- Secure the Safe: Using the provided mounting hardware (bolts, washers, nuts), secure the safe to the vehicle's console. Tighten all fasteners firmly, but do not overtighten, to prevent damage.
- Egokitzapen proba: Close the console lid to ensure proper clearance and operation. The safe should be securely mounted and not shift.
5.1 irudia: Adibideaample of the console safe securely installed within a vehicle's center console, demonstrating its integrated fit.
6. Funtzionamendu-argibideak
Your Lock'er Down console safe is equipped with a 4-digit combination lock. The factory default combination is typically 0-0-0-0. It is highly recommended to change this combination immediately after installation.
6.1 Opening the Safe:
- Rotate the dials to align your current 4-digit combination with the indicator line.
- Press the release button or turn the knob (depending on lock model) to open the safe door. The spring-assisted hinge will aid in opening.
6.2 Changing the Combination:
Follow these steps carefully to set a new personal combination:
- Ireki kutxa gotorra: Ensure the safe is open using the current combination.
- Locate Reset Lever/Button: Inside the safe door, locate the small reset lever or button. This is usually on the edge or underside of the lock mechanism.
- Engage Reset Mode: While the safe is open, push the reset lever to the "SET" position or press and hold the reset button. (Refer to specific lock instructions if provided with the safe for exact mechanism).
- Konbinazio berria ezarri: While the reset lever is engaged, rotate the dials to your desired new 4-digit combination. Choose a memorable but secure combination.
- Disengage Reset Mode: Return the reset lever to the "OFF" or original position, or release the reset button.
- Probatu konbinazio berria: With the safe door still open, scramble the dials. Then, enter your new combination and attempt to open the safe. If it opens, the new combination is set.
- Itxi eta blokeatu: Close the safe door and scramble the dials to lock it.
Important: Do not close the safe before testing the new combination. If you forget your combination, Lock'er Down may be able to assist, but it could involve a service fee or replacement of the lock mechanism.
7. Mantentzea
- Garbiketa: Garbitu kutxa gotorraren kanpoaldea oihal leun eta lehor batekinamp cloth. Avoid abrasive cleaners or solvents that could damage the powder coat finish.
- Blokeatzeko mekanismoa: The combination lock is designed for durability and typically requires no lubrication. If the dials become stiff, a small amount of graphite powder (not oil) can be applied sparingly.
- Bisagrak: The spring-assisted hinge is maintenance-free. Ensure no debris obstructs its movement.
- Segurtasun-egiaztapena: Periodically check the mounting bolts to ensure they remain tight and the safe is securely fastened to the console.
8. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Safe door will not open with combination. | Incorrect combination entered; dials not perfectly aligned; lock mechanism jammed. | Double-check the combination and ensure dials are precisely aligned. Gently jiggle the door while entering the combination. If problem persists, contact customer support. |
| Safe feels loose after installation. | Muntatzeko torlojuak ez daude behar bezain estututa. | Re-tighten all mounting bolts. Ensure the safe is properly seated in the console. |
| Dials are stiff or difficult to turn. | Accumulation of dirt or debris; lack of lubrication. | Clean the dials with a soft brush. Apply a small amount of graphite powder to the dial mechanism if necessary. Do not use oil. |
9. Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Modelo zenbakia | LD2012EX |
| Bateragarritasuna | 2005-2015 Toyota Tacoma |
| Materiala | Domestic 12-gauge cold-rolled steel (body), 10-gauge steel (door plate) |
| Blokeo mota | 4-Digit Combination Lock |
| Kolorea | Beltza |
| Elementuaren pisua | Gutxi gorabehera 10.93 libra (4.96 kg) |
| Paketearen neurriak | 11.75 x 9.5 x 9.38 hazbete (29.85 x 24.13 x 23.83 cm) |
| UPC | 851363004989 |
| Fabrikatzailea | Lock'er Down. Inc. |
10. Bermea eta Laguntza
All Lock'er Down Safe products are proudly manufactured in the United States of America and come with a Lifetime Warranty. This warranty covers defects in materials and workmanship under normal use.
For technical assistance, warranty claims, or general inquiries, please contact Lock'er Down customer support:
- Telefonoa: 800-583-9820
- Webgunea: www.lockerdown.com
Please have your product model number (LD2012EX) and purchase information available when contacting support.
