1. Sarrera
The Gatemaster Digital Lock for Wooden Gates Double LH is a surface-mounted mechanical digital lock designed for wooden gates. It provides keyless access with a code entry system on both sides of the gate. This lock features a long latching movement to accommodate gate expansion and contraction, and an auto-latching mechanism for security. It is tested for durability in various weather conditions.
2. Segurtasun informazioa
- Irakurri arretaz argibide guztiak instalatu eta erabili aurretik.
- Ensure the gate structure is sound and capable of supporting the lock.
- Instalazioan zehar, erabili babes pertsonaleko ekipamendu (BPE) egokia, hala nola segurtasun-betaurrekoak eta eskularruak.
- Mantendu pieza txikiak haurrengandik urrun itotzeko arriskuak saihesteko.
- This lock is handed (Left Hand or Right Hand). Verify the correct handing before ordering and installation, as it cannot be changed.
3. Paketearen edukia
Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela:
- Gatemaster Digital Lock Mechanism
- Keypad (integrated)
- Keep (strike plate)
- Muntatzeko hardwarea (torlojuak, azkoinak, etab.)
- Argibide eskuliburua (dokumentu hau)
4. Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Marka | Atezain nagusia |
| Modelo zenbakia | 781159147937 |
| Blokeo mota | Mechanical Digital Lock |
| Ezaugarri Berezia | Keyless, Code Entry on Both Sides |
| Materiala | Altzairu aleazioa |
| Kolorea | Beltza |
| Akabera mota | Margotua |
| Latching Movement | 20 mm |
| Gate Thickness Compatibility | Gehienez 100 mm |
| Elementuaren pisua | 5.94 kilo |
1. irudia: Dimensional drawing of the Gatemaster Digital Lock, illustrating key measurements for installation planning.
5. Instalazioa eta konfigurazioa
This section provides general guidance for installing the Gatemaster Digital Lock. Professional installation is recommended if you are unsure about any steps.
5.1 Handing Verification
Before installation, confirm that you have the correct handed lock (Left Hand or Right Hand) for your gate. The handing cannot be changed after manufacturing.
5.2 Blokeoa muntatzea
- Prepare the Gate: Ensure the gate surface is clean, flat, and free from obstructions. The lock is designed for wooden gates up to 100mm thick.
- Markatu zulaketa puntuak: Position the lock on the gate frame at the desired height. Mark the locations for the three required holes for the spindle and mounting bolts. Refer to the dimensional drawing (Figure 1) for precise measurements.
- Zulatzeko zuloak: Carefully drill the marked holes through the gate frame. Ensure holes are straight and of the correct diameter as specified in the product's detailed drilling template (not provided here, but implied by "drilling 3 holes").
- Attach Lock Body: Insert the spindle and mounting bolts through the drilled holes. Secure the main lock body to the gate using the provided screws/fasteners. Ensure it is flush and stable.
- Install the Keep: Close the gate and align the keep (strike plate) with the latchbolt. Mark and drill pilot holes for the keep. Secure the keep to the gate post or frame, ensuring the latchbolt engages smoothly and fully.
2. irudia: Aurrealdea view of the Gatemaster Digital Lock installed on a wooden gate, displaying the keypad and handle.
3. irudia: Atzekoa view of the Gatemaster Digital Lock, showing the internal keypad and handle on the opposite side of the gate.
4. irudia: Xehetasuna view of the Gatemaster Digital Lock's latching mechanism and mounting hardware.
6. Funtzionamendua
6.1 Locking the Gate
The Gatemaster Digital Lock features an auto-latching mechanism. When the gate is closed, the latchbolt automatically projects into the keep, securing the gate. No code entry is required to lock the gate.
6.2 Unlocking the Gate
- Enter the correct numerical code on the keypad.
- Turn the handle to retract the latchbolt.
- Ireki atea.
6.3 Changing the Code
The code can be easily changed for security purposes. Refer to the specific instructions provided with your lock for the exact procedure, as this typically involves a sequence of button presses and internal mechanism adjustments. This process does not require special tools.
7. Mantentzea
- Garbiketa: Wipe the lock exterior with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or keypad.
- Lubrifikazioa: Periodically apply a silicone-based lubricant to the latchbolt and internal moving parts to ensure smooth operation. Avoid oil-based lubricants which can attract dirt.
- Ikuskapena: Regularly check all mounting screws and bolts for tightness. Ensure the latchbolt moves freely and engages fully with the keep.
- Eguraldiaren babesa: While the lock is salt spray tested, extreme weather conditions may require more frequent inspection and maintenance.
8. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Lock does not engage/latch properly. | Misalignment of lock and keep; debris in mechanism; loose mounting. | Check alignment of lock and keep. Clean any debris. Tighten mounting screws. |
| Code not working. | Incorrect code entered; code mechanism issue. | Ensure correct code is entered. If issue persists, try resetting or re-entering the code as per code change instructions. |
| Heldulekua zurruna da edo zaila da biratzen. | Lubrifikazio falta; barne-oztopoa. | Apply silicone lubricant to moving parts. Inspect for any foreign objects. |
9. Bermearen informazioa
Specific warranty details for the Gatemaster Digital Lock are typically provided at the point of purchase or on the manufacturer's official website. Please retain your proof of purchase for warranty claims. For information regarding product warranty, please refer to the documentation included with your purchase or contact Gatemaster customer support.
10. Laguntza
For further assistance, technical support, or to inquire about replacement parts, please contact Gatemaster customer service. Contact details can usually be found on the manufacturer's webgunean edo produktuaren ontzian.
Fabrikatzailea: Atezain nagusia
Webgunea: www.gatemasterlocks.com (Adibampesteka, benetako esteka alda daiteke)
