1. Sarrera
This manual provides essential information for the safe installation, operation, and maintenance of your LEDONE Full Cut Off 60W LED Wall Pack Light. Please read these instructions thoroughly before installation and retain them for future reference. This fixture is designed for outdoor use in commercial and industrial settings, featuring a full cut-off design to minimize light pollution and a built-in photocell for dusk-to-dawn operation.
1.1 irudia: Aurrealdea view of the LEDONE 60W Full Cut Off LED Wall Pack Light. This image displays the fixture's dark bronze housing and the array of LED lights behind a clear, tempered glass lens.
2. Segurtasun informazioa
- OHARRA: Deskarga elektrikoaren arriskua. Deskonektatu fusible edo etengailu elektrikotik instalazioa edo mantentze-lanak egin aurretik.
- Instalazioa elektrizista kualifikatu batek egin behar du, estatuko eta tokiko araudi elektriko guztien arabera.
- Ziurtatu hornidura boltage is compatible with the fixture (120-277V AC).
- Do not handle live wires.
- Erabili segurtasun-betaurrekoak eta eskularruak instalazioan zehar.
- Ensure the fixture is securely mounted to prevent falling.
- Ez saiatu aparatua aldatzen. Edozein aldaketek bermea baliogabetuko dute.
3. Paketearen edukia
Verify that all components are present and undamaged before installation.
- 1 x LEDONE Full Cut Off 60W LED Wall Pack Light Fixture
- Muntatzeko hardwarea (torlojuak, aingurak, juntak)
- Argibide eskuliburua (dokumentu hau)
4. Zehaztapenak
| Ezaugarri | Zehaztapena |
|---|---|
| Eredua | LOD-MSL-WP60W-50K |
| Wattage | 60W |
| Distira | 6806 lumen |
| Eraginkortasuna | 126.51 lumen/watt |
| Kolore Tenperatura | 5000K (zuria) |
| Sarrera boltage | 120-277V AC |
| Argi iturri mota | LED |
| Etxebizitza Materiala | Egokitutako aluminioa |
| Lentearen materiala | Beira Tenplatua |
| Akabera mota | Powder Coated (Bronze) |
| Uraren Erresistentzia | IP65 Iragazgaitza |
| Muntatze Mota | Hormako Muntaia |
| Ezaugarri Berezia | Dusk-to-Dawn Photocell, 15-Degree Rotatable Fixture |
| Batez besteko Bizitza | 50,000 ordu |
| Produktuaren neurriak | 11.5"L x 10.8"Z x 3.9"A |
| Elementuaren pisua | 8 kilo |
| Ziurtagiriak | ETL zerrendatua |
Image 4.1: Dimensional drawing of the LEDONE 60W Wall Pack Light, showing measurements of 11.5 inches (293mm) in length, 10.8 inches (275mm) in width, and 3.9 inches (100mm) in height.
5. Konfigurazioa eta instalazioa
Hasi aurretik:
- Itzali etengailuaren edo fusibleen kutxan.
- Ensure the mounting surface is structurally sound and can support the fixture's weight.
- Have necessary tools ready: screwdriver, wire strippers, drill, sealant (if required for weatherproofing).
Muntatzeko argibideak:
- Carefully remove the fixture from its packaging.
- Detach the mounting plate from the back of the fixture.
- Position the mounting plate on the desired wall location. Mark the drilling points for the mounting screws.
- Zulo pilotuak egin eta beharrezkoa bada, aingura egokiak sartu.
- Secure the mounting plate to the wall using the provided screws. Ensure it is level and tight.
5.1. irudia: Atzealdea view of the LEDONE 60W Wall Pack Light, illustrating the integrated mounting bracket and conduit entry point for electrical wiring.
Kableatzeko argibideak:
- Feed the electrical supply wires through the conduit entry point on the mounting plate.
- Connect the fixture's wires to the supply wires using appropriate wire connectors:
- Black wire (Fixture) to Live/Hot wire (Supply)
- White wire (Fixture) to Neutral wire (Supply)
- Green/Ground wire (Fixture) to Ground wire (Supply)
- Ziurtatu konexio guztiak seguru eta behar bezala isolatuta daudela.
- Carefully tuck all wires into the junction box or mounting plate cavity.
- Attach the fixture body to the mounting plate, ensuring a tight seal to maintain IP65 rating. Secure with screws.
- Apply silicone sealant around the edges of the fixture and conduit entry points if necessary to prevent water ingress.
- Berrezarri energia etengailuan.
6. Funtzionamendu-argibideak
This LED wall pack light is equipped with a built-in photocell for automatic dusk-to-dawn operation. No manual intervention is required after installation.
- Dusk-to-Dawn Function: The integrated photocell sensor detects ambient light levels. The fixture will automatically turn ON when natural light falls below a certain threshold (dusk) and turn OFF when sufficient natural light is detected (dawn).
- Rotatable Fixture: The fixture can be rotated by 15 degrees to adjust the light direction. This adjustment should be made during installation or maintenance when power is OFF. Loosen the appropriate screws, adjust the angle, and re-tighten securely.
Image 6.1: LEDONE 60W Wall Pack Lights installed on the exterior of a commercial building at night, demonstrating their effective illumination for large outdoor areas.
7. Mantentzea
The LEDONE Wall Pack Light is designed for minimal maintenance. Regular inspection and cleaning will ensure optimal performance and longevity.
- Garbiketa: Periodically clean the exterior of the fixture, especially the lens and photocell, with a soft, damp cloth to remove dirt, dust, and debris. Ensure power is OFF before cleaning. Do not use abrasive cleaners or solvents.
- Ikuskapena: Urtero ikuskatu aparatua kalterik, kableatu solterik edo korrosiorik dagoen ikusteko. Ziurtatu muntaketa-torloju guztiak ondo estutu direla.
- Fotozelula: Keep the photocell sensor clear of obstructions (e.g., leaves, dirt, paint) to ensure proper dusk-to-dawn operation.
8. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Light does not turn ON at dusk. | No power supply; Faulty wiring; Photocell obstructed or faulty. | Check circuit breaker. Verify wiring connections. Clear any obstructions from the photocell. If problem persists, consult a qualified electrician. |
| Argia piztuta mantentzen da egunean zehar. | Photocell obstructed or faulty; Light source nearby interfering with photocell. | Clear any obstructions from the photocell. Relocate the fixture if another light source is directly illuminating the photocell. |
| Argia distira edo iluntzen da. | Loose wiring connection; Incorrect voltage; Fixture damage. | Turn off power and check all wiring connections. Ensure supply voltage is within 120-277V. If damage is suspected, discontinue use and contact support. |
9. Bermearen informazioa
The LEDONE Full Cut Off 60W LED Wall Pack Light is covered by a Berme mugatua. This product is designed for a long operational life of approximately 50,000 hours. For specific warranty terms and conditions, please refer to the warranty documentation provided at the time of purchase or contact LEDONE customer service.
10. Laguntza
LEDONE is committed to providing quality lighting solutions and customer service. If you have any questions, require technical assistance, or need to report an issue with your product, please contact LEDONE customer support. Our team is based in California and ready to assist you.
For further assistance, please visit the official LEDONE webgunera edo kontsultatu erosketa-dokumentazioa harremanetarako datuak lortzeko.
