MAIWO K3016S 2 Bay M.2 SATA Duplicator Instruction Manual

1. Produktua amaitu daview

The MAIWO K3016S is a 2-bay M.2 SATA docking station designed for duplicating and managing M.2 SATA Solid State Drives (SSDs). It supports offline cloning, allowing you to duplicate drives without connecting to a computer. This device is compatible with M.2 SATA SSDs (B+M Key) of various sizes. Important: This product is incompatible with M.2 NVMe SSDs.

Image: MAIWO K3016S 2 Bay M.2 SATA Duplicator with two M.2 SSDs inserted.

2. Paketearen edukia

Mesedez, egiaztatu elementu guztiak zure paketean daudela:

• MAIWO K3016S M.2 SATA Duplicator
• USB motako C motako C motako kablea
• USB motako C motako A motako kablea
• DC Elikatze Kablea
• Korronte egokitzailea (5V/3A)

3. Produktuaren ezaugarriak

• 2-Bay M.2 SATA Support: Accommodates two M.2 SATA SSDs (B+M Key).
• Lineaz kanpoko klonazio funtzioa: Duplicate SSDs without a computer connection.
• Tresnarik gabeko instalazioa: Easy insertion and removal of M.2 SSDs.
• Abiadura handiko datuen transferentzia: USB 3.0 Gen1 interface provides up to 5Gbps transfer rates.
• Bateragarritasun zabala: Connects to PCs, laptops, smart TVs, PS4, Xbox, and other devices.
• Energia-iturri independentea: Ensures stable operation and protects hard drives.
• Supported M.2 SATA SSD Sizes: 2230, 2242, 2260, 2280.

Image: Illustration of supported M.2 SATA SSD sizes (2230, 2242, 2260, 2280) and B+M Key compatibility.

4. Setup and Read/Write Operation

This section details how to set up the duplicator and use it for reading and writing data when connected to a computer.

1. Txertatu unitateak: Gently insert your M.2 SATA SSDs into the 'Source' and 'Target' slots. Ensure they are M.2 SATA (B+M Key) and not NVMe.
2. Konektatu energia: Insert the DC power cable into the 'DC IN' port on the duplicator, then connect the power adapter to a power outlet.
3. Konektatu ordenagailura: Insert the data cable (USB Type-C to Type-C or Type-C to Type-A) into the 'PC' port on the duplicator and the other end into your computer's USB port.
4. Piztu: Press the power switch on the duplicator. Wait 3-5 seconds for the drive slot LED lights to illuminate, indicating the drives are recognized.

Initializing a New Disk (Windows):

1. Right-click on 'This PC' and select 'Manage'.
2. In the Computer Management window, navigate to 'Disk Management' under 'Storage'.
3. Locate your new SSD. It may appear as 'Unknown' or 'Not Initialized'. Right-click on the disk and select 'Initialize Disk'. Choose MBR for disks smaller than 2TB or GPT for disks larger than 2TB.
4. After initialization, right-click on the unallocated space of the new disk and select 'New Simple Volume'. Follow the wizard to assign a drive letter and format the disk (NTFS is recommended).
5. Once formatted, your disk will be ready for use.

5. Lineaz kanpoko klonazio funtzioa

The offline clone function allows you to duplicate an M.2 SATA SSD without connecting the duplicator to a computer. This is ideal for system migration or data backup.

1. Insert Source and Target Drives: Insert the source M.2 SATA SSD into the 'Source' slot (HDD1) and the target M.2 SATA SSD into the 'Target' slot (HDD2). Ensure the target disk's capacity is equal to or larger than the source disk's capacity.
2. Konektatu energia: Insert the DC power cable into the 'DC IN' port on the duplicator, then connect the power adapter to a power outlet. Do not connect the duplicator to a computer via the 'PC' port during offline cloning.
3. Piztu: Press the power switch on the duplicator. Wait 3-5 seconds for the drive slot LED lights to illuminate.
4. Klonazioa hasi: Press and hold the clone button (usually a small button near the LEDs) for approximately 5 seconds until the progress indicator LEDs (25%, 50%, 75%, 100%) begin to flicker. This indicates the cloning process has started.
5. Jarraitu aurrerapena: The progress indicator LEDs will flicker sequentially (25%, 50%, 75%, 100%) to show the cloning status. Once all LEDs are solid, the clone is complete.

Image: Two M.2 SATA SSDs inserted into the Source and Target slots for offline cloning.

6. Connecting to a Phone

The MAIWO K3016S can also be connected to compatible smartphones for data access.

1. Ensure OTG Support: Your smartphone must support USB On-The-Go (OTG) functionality.
2. Konektatu energia: Always connect the DC power cable to the duplicator and a power outlet when connecting to a phone. The DC interface cannot be connected to a computer's USB port for power in this scenario.
3. Konektatu telefonora: Use a compatible USB Type-C to Type-C cable to connect the duplicator's 'PC' port to your smartphone.
4. Sarbide Datuak: Your phone should recognize the connected SSD as external storage. You can then use your phone's file manager to browse and manage files.

7. Arazoak

• Gailua ez du ordenagailuak ezagutzen:
  • Ensure the power adapter is connected and the duplicator is powered on.
  • Verify that the data cable is securely connected to both the duplicator's 'PC' port and your computer's USB port.
  • Confirm that the inserted SSDs are M.2 SATA (B+M Key) and not M.2 NVMe. This device does not support NVMe SSDs.
  • SSD berrietarako, ziurtatu Diskoen Kudeatzailean (Windows) edo Diskoen Utilitatean (macOS) hasieratu eta formateatu direla.
• Lineaz kanpoko klonazioa huts egiten du edo ez da abiarazten:
  • Double-check that the target SSD's capacity is equal to or larger than the source SSD's capacity.
  • Ensure the duplicator is not connected to a computer via the 'PC' port during offline cloning.
  • Confirm that the power adapter is connected and providing sufficient power.
  • Press and hold the clone button for at least 5 seconds until the progress indicator LEDs begin to flicker.
  • If the progress indicator LEDs do not update smoothly (e.g., stuck at 25%), the cloning process may still be ongoing. Allow ample time for completion, especially for large drives.
• Device Gets Warm During Operation:
  • It is normal for the device and SSDs to generate some heat during intensive operations like cloning or heavy data transfer. Ensure adequate ventilation around the device.

8. Zehaztapenak

9. Bermea eta Laguntza

For warranty information, technical support, or service inquiries, please refer to the official MAIWO webwebgunera edo jarri harremanetan zuzenean bezeroarentzako arreta-zerbitzura. Gorde erosketa-agiria berme-erreklamazioetarako.